A latching device used to open a relay in the event a Insulation Monitoring Device detects a fault or fails in operation.

To optimize your 4-layer board manufacturing process with Seeed Studio Fusion, utilize this comprehensive template. It incorporates a majority of the essential manufacturing constraints as global rules, ensuring a smoother and more efficient production workflow. #project-template #template #manufacturer-design-rules This project is a vessel monitoring system built using Seeed Studio Xiao Sense, Xiao Expansion Board with OLED, a UART WiFi module, a normally open float switch, and a UART SIM800L cellular module. The system displays a 30-second countdown on the OLED screen, calibrates the IMU sensor, converts to Euler angles, and stores these values for comparison with future readings. It also sets up the WiFi module as an access point to configure the vessel's name, contact numbers, and angle thresholds for list and trim notifications. Reports are sent at specified times via the cellular module.

Arduino-Based Automated Irrigation System with Virtual Water Tank Monitoring

This project is a reference design based on the BQ24075RGTT, a single cell Li-Ion battery charger. It manages the power between an external power source (VIN), a Li-Ion battery (BAT), and a system power rail (SYS). Key features include power-path management, battery thermistor monitoring, and charge status indication. #project #BQ24075 #ReferenceDesign #charger #BatteryManagement #referenceDesign #bms #texas-instruments #template #reference-design #polygon

This project aims to develop a wearable and portable pregnancy monitoring system that continuously tracks key health parameters and provides real-time notifications to healthcare providers and family members. The solution integrates a comfortable, non-intrusive wearable device with embedded sensors, a mobile application, cloud connectivity, and machine learning algorithms to predict and manage potential complications.

This project is a reference design based on the BQ24295, a single cell Li-Ion battery charger. It manages the power between an external power source (VIN), a Li-Ion battery (BAT), and a system power rail (SYS). Key features include power-path management, battery thermistor monitoring, and charge status indication. #project #BQ24295 #ReferenceDesign #charger #BatteryManagement #referenceDesign #bms #texas-instruments #template #reference-design #polygon

This project is a reference design based on the BQ25890, a single cell Li-Ion battery charger. It manages the power between an external power source (VIN), a Li-Ion battery (BAT), and a system power rail (SYS). Key features include power-path management, battery thermistor monitoring, and charge status indication. #project #BQ25890 #ReferenceDesign #charger #BatteryManagement #referenceDesign #bms #texas-instruments #template #reference-design #polygon

This project is a reference design based on the ISL6292, a single cell Li-Ion battery charger. It manages the power between an external power source (VIN), a Li-Ion battery (BAT), and a system power rail (SYS). Key features include power-path management, battery thermistor monitoring, and charge status indication. #project #ISL6292 #ReferenceDesign #charger #BatteryManagement #referenceDesign #bms #renesas #template #reference-design #polygon

This project is a reference design based on the BQ25895, a single cell Li-Ion battery charger. It manages the power between an external power source (VIN), a Li-Ion battery (BAT), and a system power rail (SYS). Key features include power-path management, battery thermistor monitoring, and charge status indication. #project #BQ25895 #ReferenceDesign #charger #BatteryManagemen #referenceDesign #bms #texas-instruments #template #reference-design

Device embedded with sensors and actuators, capable of monitoring stress levels and providing personalized feedback to help users manage stress effectively. The device will be made from smart fabric integrated with sensors to detect physiological signals associated with stress. It will provide real-time feedback through haptic or visual cues to guide users in practicing relaxation techniques

A Bluetooth Power Logger utilizing Seeed Studio's XIAO nRF52840 uC Power Monitoring handled using the INA260 IC, this design should be safe for usage under 36V 8A. Higher current rating will require larger trace widths on the main power trace. Attach your Power Supply to V+ and GND. Then attach your loading device to LOAD+ and GND.

we make a project those protection of induction motor protection using arduino R3. my protection is Overcurrent Protection, Overvoltage and Under voltage Protection, Vibration Monitoring, User Interface, Audible Ale, rts, Calibration and Adjustability, Voltage Regulation, all protection show on led display 16×2

A specialized capture and containment system designed for managing dangerous xenomorph specimens. Includes remote monitoring and rapid quarantine features.

Here’s a detailed project description prompt that you can use to generate the circuit: --- ### Project Description for Circuit Generation **Project Title**: Vehicle-to-Vehicle (V2V) Communication System for Preventing Dangerous Overtaking Maneuvers **Objective**: The prime objective of this project is to develop and implement a Vehicle-to-Vehicle (V2V) communication system that enhances road safety by preventing dangerous overtaking maneuvers. This system will provide real-time alerts to drivers about the presence and intentions of nearby vehicles, reducing the risk of collisions and improving overall traffic flow on highways. **Components**: 1. **Microcontroller (e.g., Arduino)** 2. **GPS Module (NEO-6M)** 3. **LoRa Module (SX1272)** 4. **Audio/Visual Alert Systems (e.g., Buzzer, LEDs)** 5. **SD Card Module** 6. **LM7805 Voltage Regulator** 7. **9V Battery** **Connections**: 1. **Power Supply**: - **9V Battery**: - Positive to **LM7805 Voltage Regulator Input** - Negative to **Common Ground** - **LM7805 Voltage Regulator**: - Output to **5V Rail (VCC)** - Ground to **Common Ground** 2. **Microcontroller (e.g., Arduino)**: - **Power**: - VCC to **5V Rail (VCC)** - GND to **Common Ground** 3. **GPS Module (NEO-6M)**: - **Power**: - VCC to **5V Rail (VCC)** - GND to **Common Ground** - **Communication**: - TX to **RX (Digital Pin) of Microcontroller** - RX to **TX (Digital Pin) of Microcontroller** (if needed) 4. **LoRa Module (SX1272)**: - **Power**: - VCC to **3.3V or 5V (based on module specification)** - GND to **Common Ground** - **SPI Communication**: - MOSI to **MOSI (Digital Pin) of Microcontroller** - MISO to **MISO (Digital Pin) of Microcontroller** - SCK to **SCK (Digital Pin) of Microcontroller** - NSS to **CS (Digital Pin) of Microcontroller** 5. **Audio/Visual Alert System (Buzzer, LEDs)**: - **Buzzer**: - Positive to **Digital Output Pin** of Microcontroller through a resistor - Negative to **Common Ground** - **LEDs**: - Anode (Positive) to **Digital Output Pin** of Microcontroller through a resistor - Cathode (Negative) to **Common Ground** 6. **SD Card Module**: - **Power**: - VCC to **3.3V or 5V (based on module specification)** - GND to **Common Ground** - **SPI Communication**: - MOSI to **MOSI (Digital Pin) of Microcontroller** - MISO to **MISO (Digital Pin) of Microcontroller** - SCK to **SCK (Digital Pin) of Microcontroller** - CS to **Digital Pin of Microcontroller** **System Functionality**: - **System Initialization and Configuration**: Ensure the microcontroller and communication modules are correctly initialized and configured for optimal performance. - **GPS Signal Acquisition and Data Parsing**: Accurately acquire and parse GPS data to determine the vehicle's current location and speed. - **Vehicle Position and Speed Calculation**: Calculate precise vehicle position and speed in real-time to provide accurate data for communication. - **V2V Communication Establishment**: Establish a reliable communication link between vehicles using the LoRa module to transmit and receive data. - **Overtaking Intention Detection and Signal Transmission**: Detect overtaking intentions and transmit this information to nearby vehicles to alert them of potential hazards. - **Signal Reception and Processing by Nearby Vehicles**: Ensure nearby vehicles can receive and process overtaking signals to determine the position and speed of the overtaking vehicle. - **Driver Alert Generation**: Generate audio and visual alerts to inform drivers of the presence and intentions of nearby vehicles, especially during overtaking. - **Continuous Monitoring and Data Logging**: Continuously monitor the system's performance and log relevant data for analysis and future improvements.

System for monitoring the weight of a bee hive that will allow for the health of a hive to monitored remotely.

This project is a reference design based on the BQ24230, a single cell Li-Ion battery charger. It manages the power between an external power source (VIN), a Li-Ion battery (BAT), and a system power rail (SYS). Key features include power-path management, battery thermistor monitoring, and charge status indication. #project #BQ24230 #ReferenceDesign #charger #BatteryManagement #referenceDesign #bms #texas-instruments #template #reference-design #polygon .

Remote Power Supply with built in monitoring and local sound based alarms. -4A CC output -2.5W Speaker Output

The HY2213 series, developed and manufactured by HYCON Technology Corp., presents a high-precision, energy-efficient battery charge balance integrated circuit (IC) specifically designed for single-cell lithium-ion or lithium-polymer batteries. This component encompasses a wide range of features tailored for multi-cell Li-ion rechargeable battery packs applications, including a high-precision voltage detection circuit capable of monitoring overcharge situations with a detection voltage range between 4.000V and 4.500V. Its unique design allows for delay times generated internally, eliminating the need for external capacitors and reducing the overall component count. Operating with a remarkably low consumption current in both operation (Typ. value 2.5uA, Max. value 3.5uA at VDD=3.9V) and standby modes (Max. value 0.5uA at VDD=2.7V), the HY2213 series is designed for energy-sensitive applications. It also offers versatility in operation temperature, ranging from -40℃ to +85℃, and comes in a compact SOT-23-6 package, making it suitable for space-constrained applications. The HY2213 series underscores HYCON Technology Corp.'s commitment to advancing battery management solutions by integrating overcharge detection and release, standby detection, and charge balance functionality into a single, efficient, and easy-to-use IC.

The ATtiny45/85 USB Phone Charge Guard regulates charging by monitoring voltage, current, power, and energy, protecting Li-ion batteries.

Simple plug-and-play breadboard power supply with current monitoring output, LED indicators, switches for both rails, and decoupling capacitors.

This is the circuit schematic and PCB design for the Sensor Node portion of our Remote Vineyard Irrigation Monitoring System!