ESP-WROOM-32 series Transceiver; 802.11 b/g/n (Wi-Fi, WiFi, WLAN), Bluetooth® Smart 4.x Low Energy (BLE) Evaluation Board #simplifiedFootprint

Prototype breadboard-friendly breakout board for the Realtek RTL8761BTV-CG Bluetooth 5 UART HCI controller, with 0.1 inch headers, 3.3 V power input, support passives, 40 MHz crystal, and RF antenna matching provisions.

Consumer USB-C powered low-power environmental sensor node with Wi-Fi, Bluetooth LE, digital temperature/humidity sensing, and protected 5 V input supporting 0.5–3 A USB-C sources.

Consumer USB-C powered low-power environmental sensor node using a Wi-Fi + Bluetooth LE MCU module, digital temperature/humidity sensor, USB-C 5 V input, and protected 3.3 V power architecture sized for 0.5–3 A USB-C sources.

USB-C powered low-power temperature and humidity sensor node with WiFi, Bluetooth LE, protected 5 V input, and digital environmental sensing.

USB-C powered consumer environmental sensor node with Wi-Fi, Bluetooth LE, digital temperature/humidity sensing, and protected 5 V input power path.

Consumer USB-C environmental sensor node using a low-power Wi-Fi + Bluetooth MCU and digital temperature/humidity sensor. Powered from 5 V USB-C sink input with input protection including reverse blocking, OVP, UVLO, and overcurrent limiting, then regulated to 3.3 V for the radio and sensor.

Low-power consumer environmental sensor node with USB-C 5V input, Wi-Fi + Bluetooth connectivity, digital temperature/humidity sensing, and protected 5V-to-3.3V power architecture including reverse, OVP, UVLO, and OCP considerations.

USB-C powered low-power environmental sensor node with Wi-Fi, Bluetooth LE, protected 5 V input, 3.3 V regulation, and digital temperature/humidity sensing for consumer use.

ESP32-based universal inline analog signal conditioner with protected sensor input, DAC output, fail-safe NC relay passthrough, OLED UI, Bluetooth profile logic, and terminal-block I/O for automotive/bench use.

I am developing a trackable USB drive that utilizes 4G and GNSS technology, without relying on Bluetooth or Wi-Fi. When the USB drive is plugged into a computer, it begins charging its internal lithium battery while the positioning system remains dormant. Once unplugged, the positioning system activates and reports its location once per day.

Reusable ESP32-WROOM golf ball dispenser interface board with protected 12V to 24V input power, one conditioned coin pulse input, SPDT relay dry-contact output, open-collector output, Bluetooth pulse generation, screw-terminal field wiring, and optional UART programming access.

High-level modular schematic requirements for a Teensy 4.1 based RFID-triggered audio system with Bluetooth input, analog source selection, stereo amplification, and 12V to 5V power partitioning.

Seeed Studio XIAO nRF52840 is carrying wireless capability for the first time and it supports Bluetooth 5.0, also able to operate with low power consumption. It will be your best microcontroller for Bluetooth applications.

A low energy Bluetooth Watch using the NRF52840

Low-power USB-C 5V environmental sensor node with robust input protection, ESP32 Wi-Fi/BLE connectivity, digital temperature/humidity sensing, Bluetooth peripheral syncing, and EEG/PPG sensor interfaces for prototype biosignal acquisition.

I want to make the hardware and software for a 5.2 inch diameter capacitive touch screen display. Please give me all of the information the enable me to do this, I have NO experience of code or PCB design or manufacture. I want to measure a battery voltage and amps used via a coulomb counter to indicate a fuel level indicator icon I just want two connections + and - Its not single cell, its a battery of 20 cells LIFEPO4 each cell is 3.2v nominal and 100a I also want to include a can bus controller to read and display motor rpm And can bus temperature Also a GPS speedometer, odometer and trip. Toggle between knots, mph and kmh by touchscreen, Also toggle between nautical miles, km and miles with a Trip meter reset. Startup screen animation, Speed Incremental bar Plus a digital reading, And an animated compass heading STM32 or ESP32 Please recommend all hardware, I have the can protocol for the motor controller but not with me right now Connection via a 4 pin military connector can high can low +v and –v Top middle of screen incremental speed bar that fills 120 degrees with 60 degrees being top dead centre in an arc Dead middle of screen DIGITAL SPEED To the left of dead middle a Compass To the right of dead centre DIGITAL RPM Next line with a space between dead centre will be the ODOMETER, Trip and Battery level Below those are the Toggle buttons Heading compass by GPS, no WiFi or Bluetooth Write full GPS parsing code for my firmware Can you write the code with all of your recommendations for smoother bug free operation Can a FRAM replace the sd card ALL components must fit onto one board into an enclosure directly behind the screen that measures 5.0 inches diameter x 13mm deep inside dimensions

Product Type: Wearable AI pendant Primary Function: Records audio, generates transcripts, and organizes information about daily interactions User Interaction: Input: Activation button Output: RGB LED ring, Bluetooth link to phone Key Features: Audio Recording: Activated by button press Transcription: Converts audio to text Sentiment Analysis: Embedded AI evaluates sentiment Information Management: Filters essential information and action items Technical Specifications Form Factor: Wearable pendant Display: RGB LED ring around the edge Sensors: 2 Microphones 1 Button Connectivity: Bluetooth for phone linkage Wi-Fi USB-C for charging Wireless Protocol: Wi-Fi, Bluetooth Battery Type: LiPo 2000 mAh Battery Life: 6 hours of continuous use Charging Method: USB-C Operating Voltage: 3.3V Operating Conditions: Temperature Range: -10°C to 70°C Humidity: 10 to 90% Software: Python for AI and processing Compliance: RoHS, FCC, CE Reliability: 20,000 hrs Life Cycle Expectancy: 10 years AI Capabilities Speech to Text Recognition: Converts audio input to written text Embedded AI Sentiment Analysis: Evaluates the mood or sentiment expressed in the text Essential Information Filtering: Identifies and segregates crucial data and actionable items Power Consumption and Efficiency Power consumption must align with battery capacity to ensure 6 hours of continuous operational use.

RF Module, ESP32-D0WD SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 2.7-3.6V, onboard antenna, SMD #RF #ESP32 #WiFi #BLE #commonpartslibrary

Dual core, Wi-Fi: 2.4 GHz up to 150 Mbits/s,BLE (Bluetooth Low Energy) and legacy Bluetooth, 32 bits, Up to 240 MHz #esp32 #ble #wifi #arm

ESP32-S3-PLC For Home and Small Industry, include 8 12V SSR to control DC and AC Current, 8 isolated I/O and a ESP32 as a brain with a USB C to upload the code and the connectivity advantages of the ES32 like WIFI and Bluetooth.

Dual core, Wi-Fi: 2.4 GHz up to 150 Mbits/s,BLE (Bluetooth Low Energy) and legacy Bluetooth, 32 bits, Up to 240 MHz #esp32 #ble #wifi #arm

ESP32-S3-PLC For Home and Small Industry, include 8 12V SSR to control DC and AC Current, 8 isolated I/O and a ESP32 as a brain with a USB C to upload the code and the connectivity advantages of the ES32 like WIFI and Bluetooth.

Product Type: Wearable AI pendant Primary Function: Records audio, generates transcripts, and organizes information about daily interactions User Interaction: Input: Activation button Output: RGB LED ring, Bluetooth link to phone Key Features: Audio Recording: Activated by button press Transcription: Converts audio to text Sentiment Analysis: Embedded AI evaluates sentiment Information Management: Filters essential information and action items Technical Specifications Form Factor: Wearable pendant Display: RGB LED ring around the edge Sensors: 2 Microphones 1 Button Connectivity: Bluetooth for phone linkage Wi-Fi USB-C for charging Wireless Protocol: Wi-Fi, Bluetooth Battery Type: LiPo 2000 mAh Battery Life: 6 hours of continuous use Charging Method: USB-C Operating Voltage: 3.3V Operating Conditions: Temperature Range: -10°C to 70°C Humidity: 10 to 90% Software: Python for AI and processing Compliance: RoHS, FCC, CE Reliability: 20,000 hrs Life Cycle Expectancy: 10 years AI Capabilities Speech to Text Recognition: Converts audio input to written text Embedded AI Sentiment Analysis: Evaluates the mood or sentiment expressed in the text Essential Information Filtering: Identifies and segregates crucial data and actionable items Power Consumption and Efficiency Power consumption must align with battery capacity to ensure 6 hours of continuous operational use.

Product Type: Wearable AI pendant Primary Function: Records audio, generates transcripts, and organizes information about daily interactions User Interaction: Input: Activation button Output: RGB LED ring, Bluetooth link to phone Key Features: Audio Recording: Activated by button press Transcription: Converts audio to text Sentiment Analysis: Embedded AI evaluates sentiment Information Management: Filters essential information and action items Technical Specifications Form Factor: Wearable pendant Display: RGB LED ring around the edge Sensors: 2 Microphones 1 Button Connectivity: Bluetooth for phone linkage Wi-Fi USB-C for charging Wireless Protocol: Wi-Fi, Bluetooth Battery Type: LiPo 2000 mAh Battery Life: 6 hours of continuous use Charging Method: USB-C Operating Voltage: 3.3V Operating Conditions: Temperature Range: -10°C to 70°C Humidity: 10 to 90% Software: Python for AI and processing Compliance: RoHS, FCC, CE Reliability: 20,000 hrs Life Cycle Expectancy: 10 years AI Capabilities Speech to Text Recognition: Converts audio input to written text Embedded AI Sentiment Analysis: Evaluates the mood or sentiment expressed in the text Essential Information Filtering: Identifies and segregates crucial data and actionable items Power Consumption and Efficiency Power consumption must align with battery capacity to ensure 6 hours of continuous operational use.