8 Position Wire to Board Terminal Block Horizontal with Board 0.200" (5.08mm) Through Hole #CommonPartsLibrary #Connector #Interconnect #Terminal-Block #Wire to Board #COMBICON TDPT

USB - micro B USB 2.0 Receptacle Connector 5 Position Surface Mount, Right Angle; Through Hole #CommonPartsLibrary #Connector #Interconnect #USB-micro

1mm Uninsulated Shorting Plug, gold, 10.16mm pitch 2 (1 x 2) Position Shunt Connector Non-Insulated 0.400" (10.16mm) Gold #Connector #Interconnect #Shunt #Jumper #D3082

50 Position Connector Receptacle, Center Strip Contacts Surface Mount Gold The DF40HC series connector is a high-density, low-profile board-to-board interconnect solution designed for compact electronic assemblies requiring reliable signal integrity and mechanical robustness. This connector is intended for parallel board stacking applications where space constraints demand minimal height and fine contact pitch. It provides secure mating with precise alignment features and is optimized for high-speed signal transmission in advanced electronic systems such as portable devices, embedded modules, and industrial electronics. Mechanical Characteristics The connector features a slim, rectangular form factor suitable for high-density PCB layouts. It incorporates a fine-pitch contact arrangement to maximize signal routing efficiency within a limited footprint. The housing is constructed from high-temperature thermoplastic material to support standard reflow soldering processes. Contacts are designed to ensure consistent normal force, enabling stable electrical connection under vibration and mechanical stress. The mating interface includes polarization features to prevent incorrect insertion and to guide proper alignment during assembly. Electrical Characteristics The connector is engineered to support reliable signal transmission across multiple contact points with low contact resistance and stable impedance characteristics. It is suitable for both signal and low-power applications. Contact plating is optimized to maintain conductivity and minimize wear over repeated mating cycles. The design supports high-speed data transfer by reducing crosstalk and maintaining signal integrity across adjacent contacts. Environmental Characteristics The component is designed to operate within standard industrial temperature ranges and is compatible with lead-free reflow soldering processes. Materials used in construction comply with common environmental and regulatory standards for electronic components. The connector maintains performance under typical environmental stresses such as humidity, temperature variation, and mechanical vibration. Materials and Finishes The insulating housing is manufactured from a high-performance thermoplastic with appropriate flammability rating. Contacts are formed from copper alloy and plated with a noble metal finish over a suitable underlayer to ensure durability, corrosion resistance, and consistent electrical performance. Application Notes This connector is intended for use in applications requiring compact stacking of printed circuit boards with reliable electrical interconnection. Proper PCB layout, including pad design and solder mask considerations, is essential to ensure optimal performance. Care should be taken during handling and assembly to avoid damage to fine-pitch contacts. Designers should follow recommended land patterns and assembly guidelines provided by the manufacturer to achieve consistent solder joints and mechanical stability. #commonpartslibrary #connector #receptacle #surfacemount

10 Position Terminal Block Header, Male Pins, Shrouded (4 Side) 0.100" (2.54mm) 90°, Right Angle Through Hole #CommonPartsLibrary #Connector #Interconnect #Terminal-Block #Header #Plugs and Sockets #MICRO-COMBICON MC

Connector Header Through Hole 4 position 0.100" (2.54mm) UART header 1x4 2.54mm Single-row, through-hole male pin header with 4 positions and 2.54 mm pitch. Designed for board-to-wire or board-to-board interconnect applications such as UART interfaces. Mechanical Specifications Number of Positions: 4 Number of Rows: 1 Pitch: 2.54 mm (0.100") Mounting Style: Through Hole Mounting Angle: Straight (Vertical) Contact Gender: Male (Pin) Termination Type: Solder Pin Housing Material: Polybutylene Terephthalate (PBT) Housing Color: Black Electrical Specifications Current Rating: 4.3 A – 6.3 A (per pin, depending on conditions) Voltage Rating: 450 VAC – 550 VAC Contact Resistance: (Typical for series, not specified exact) Insulation Resistance: (Not specified) Material & Plating Contact Material: Phosphor Bronze Contact Plating: Gold Flammability Rating: UL94 V-0 Environmental & Compliance RoHS Compliance: Yes Country of Origin: USA Packaging Packaging Type: Bulk Factory Pack Quantity: 1 Series Information Series: TSW (Samtec Pin Strip Header Series) Product Type: Headers & Wire Housings Typical Applications UART / Serial communication headers Microcontroller programming interfaces General-purpose 2.54 mm interconnects Prototyping and development boards #commonpartslibrary #connector

Connector Header Through Hole 6 position 0.100" (2.54mm) The TSW-106-06-T-S is a through-hole, single-row, 6-position header from Samtec’s TSW series, designed for board-to-board or wire-to-board interconnections. It features a standard 2.54 mm (0.100") pitch and utilizes square posts for reliable mating with female sockets or IDC connectors. This header is commonly used in prototyping, development boards, and general-purpose PCB designs requiring robust and cost-effective interconnect solutions. Key Features Single-row vertical header 6 positions (1x6 configuration) Standard 2.54 mm pitch spacing Through-hole mounting for strong mechanical retention Tin-plated contacts for cost efficiency Square post design for reliable electrical contact Compatible with a wide range of mating connectors Electrical Characteristics Current Rating: ~3 A per contact (typical, depending on application) Contact Resistance: ≤ 10 mΩ (initial) Insulation Resistance: ≥ 1000 MΩ Withstanding Voltage: ~500 VAC Mechanical Characteristics Number of Positions: 6 Rows: 1 Pitch: 2.54 mm (0.100") Mounting Type: Through-hole Contact Type: Male pin (square post) Post Length Style: Standard (06) Tail Length: ~3.18 mm (0.125") typical Mating Pin Size: ~0.64 mm square Material and Plating Contact Material: Phosphor Bronze Plating: Tin over Nickel Insulator Material: Glass-filled thermoplastic (UL94 V-0 rated) Environmental Specifications Operating Temperature Range: -55°C to +105°C RoHS Compliant: Yes Lead-Free: Yes Applications PCB prototyping and development boards Embedded systems and microcontroller headers Board-to-board connections General-purpose signal connections Packaging Typically supplied in bulk or tube packaging depending on order quantity #commonpartslibrary #connector #header

Connector Header Through Hole 10 position 0.050" pin header 2x5 1.27mm The Harwin M50-3500542 is a 1.27 mm pitch (0.05") 2×5 male pin header from the Harwin Archer M50 series, designed for board-to-board or cable-to-board interconnections. It is a through-hole, vertical PCB connector commonly used in embedded systems, debug interfaces (SWD/JTAG), and compact electronics where high-density signal routing is required. This connector provides a reliable low-profile interconnect solution with gold-plated contacts for good signal integrity and durability in industrial environments. Key Features Connector Type 2×5 (10-position) male pin header Dual-row configuration Pitch 1.27 mm (0.05") fine pitch for high-density PCB layouts Mounting Type Through-hole vertical PCB mount Contact Type Male square pins (0.4 mm typical) Electrical Rating Up to 1A per contact Contact Plating Gold plated mating area Tin plated tail for soldering Operating Temperature -40 °C to +105 °C Housing Material High-temperature thermoplastic (UL94 V-0 rated) Stacking / Mating Heights Multiple height options (approx. 3.2 mm to 6.2 mm) for flexible board stacking Compact Design Designed for high-density embedded PCB layouts Typical Applications ARM Cortex SWD / JTAG debug headers Embedded development boards Board-to-board mezzanine connections Industrial control electronics Compact IoT and MCU systems #CommonPartsLibrary #Connector #Header

Connector Header Through Hole 6 position 0.100" (2.54mm) The 640456-6 is a 6-position, single-row wire-to-board header connector from TE Connectivity (AMP series), designed for reliable power and signal connections in a wide range of electronic applications. It features a 2.54 mm pitch and through-hole mounting for strong mechanical retention and ease of assembly. The connector is commonly used with matching crimp housings and terminals, providing a secure and serviceable interconnect solution for PCB-based systems. Key Features 6-position (1x6) header connector 2.54 mm pitch spacing Through-hole mounting (THT) Vertical (top-entry) orientation Friction-lock compatible with mating housings Tin-plated contacts for good conductivity and corrosion resistance Durable thermoplastic housing Mechanical Characteristics Mounting Type: Through Hole Orientation: Vertical (Top Entry) Pitch: 2.54 mm Number of Positions: 6 Row Configuration: Single row Mating Type: Friction fit with compatible housing Termination Type: Solder tails Electrical Characteristics Rated Current: Up to 3 A per contact (depending on wire gauge) Rated Voltage: 250 V AC/DC Contact Resistance: ≤ 20 mΩ (initial) Insulation Resistance: ≥ 1,000 MΩ Dielectric Withstanding Voltage: 1,000 VAC Material Specifications Housing: Thermoplastic, UL94V-0 rated Contacts: Copper alloy Contact Plating: Tin over nickel Environmental Specifications Operating Temperature Range: -40°C to +105°C Storage Temperature: -40°C to +105°C Packaging Information Packaging Type: Bulk or tray (varies by supplier) RoHS Compliant: Yes Lead-Free: Yes Compatible Components Mating Housing: TE Connectivity compatible crimp housings (e.g., AMP series) Crimp Terminals: соответствующие crimp contacts for 2.54 mm systems Typical Applications PCB interconnects Consumer electronics Industrial control systems Power and signal distribution Prototyping and development boards #CommonPartsLibrary #Connector #Header #Male-pins #MTA-100