2 Line Common Mode Choke Surface Mount 90 Ohms @ 100 MHz 400mA DCR 190mOhm The ACM2012-900-2P-T002, manufactured by TDK, is a 2-line common mode filter that helps reduce electromagnetic interference (EMI) and radio-frequency interference (RFI) in electronic systems. It is built using a wire-wound chip structure and optimized for high-speed differential signals while maintaining low impact on the desired signal. Key Characteristics Component Type: Common Mode Choke / EMI Filter Lines: 2-line (for differential signal pairs) Impedance: 90 Ω @ 100 MHz Current Rating: up to 400 mA DC Resistance: ~190 mΩ max Voltage Rating: up to 50 V Package Size: 0805 (2.0 × 1.2 mm) Mounting: Surface Mount (SMD) Function Suppresses common-mode noise on signal lines Maintains low differential impedance, so signal integrity is preserved Helps systems pass EMI/EMC compliance In simple terms: It filters out noise without affecting the actual data signal. Typical Applications USB, HDMI, Ethernet lines High-speed communication interfaces Embedded systems and IoT devices Consumer electronics and industrial equipment LVDS and display interfaces #CommonPartsLibrary #Filter #ACM

16 Position Header Connector 0.100" (2.54mm) Through Hole, Right Angle Gold The PPPC082LJBN-RC is a dual-row, right-angle pin header connector intended for through-hole PCB mounting. It uses a standard 2.54 mm pitch with a 2×8 pin configuration and is commonly used for board-to-board or board-to-cable connections. The connector provides stable mechanical support and reliable electrical performance, making it suitable for prototyping, embedded systems, and general-purpose electronic designs. Mechanical Specifications Connector Type: Pin Header Mounting Type: Through-Hole, Right Angle Number of Positions: 16 (2×8) Pitch: 2.54 mm Row Spacing: 2.54 mm Contact Orientation: Right Angle Termination Style: Solder Housing Material: Thermoplastic (UL94V-0 rated) Contact Material: Brass Electrical Specifications Current Rating: Typically up to 3 A per contact Voltage Rating: Typically 250 V Contact Resistance: ≤ 20 mΩ Insulation Resistance: ≥ 1000 MΩ Dielectric Withstanding Voltage: ~500 VAC Environmental Specifications Operating Temperature Range: -40°C to +105°C Flammability Rating: UL94V-0 RoHS Compliance: Yes Plating Contact Plating: Gold flash over nickel (typical) Tail Plating: Tin over nickel Applications PCB interconnections Embedded systems and microcontroller boards Industrial control interfaces Consumer electronics prototyping Signal and low-power connections Mating Compatibility Compatible with standard 2.54 mm pitch female headers and IDC connectors #commonpartslibrary #connector #header

16 Position Receptacle Connector 0.100" (2.54mm) Through Hole, Right Angle Tin The SSQ-108-02-T-D-RA is a dual-row, right-angle female socket connector manufactured by Samtec. It is designed for board-to-board or wire-to-board interconnections in through-hole mounting applications. This connector features a 2.54 mm pitch with high-reliability contact systems, making it suitable for prototyping, embedded systems, and industrial electronics. The right-angle configuration enables horizontal mating, optimizing space in compact PCB layouts. Key Features Dual-row female socket strip Right-angle orientation for horizontal mating Standard 2.54 mm pitch spacing Through-hole mounting for secure PCB attachment High-reliability phosphor bronze contacts Gold-plated contact area for improved conductivity and corrosion resistance Black thermoplastic housing (UL94V-0 rated) Mechanical Specifications Number of Positions: 16 (2 × 8 configuration) Pitch: 2.54 mm Row Spacing: 2.54 mm Mounting Type: Through-hole Orientation: Right-angle Contact Type: Female socket Mating Post Length Compatibility: Standard 0.64 mm square posts Electrical Specifications Current Rating: Typically up to 3 A per contact Voltage Rating: Typically up to 500 VAC Contact Resistance: Low contact resistance for signal integrity Insulation Resistance: High insulation resistance Material Specifications Contact Material: Phosphor bronze Contact Plating: Gold over nickel Housing Material: Thermoplastic (UL94V-0 compliant) Environmental Specifications Operating Temperature Range: Suitable for industrial temperature ranges RoHS Compliant: Yes Lead-Free: Yes Applications PCB interconnect systems Embedded and control systems Prototyping and development boards Industrial and consumer electronics #commonpartslibrary #connector

LED Lighting Driver ICs LED Lighting Drivers 4-Channel RGBW Driver, I2C, 1.5x1.5mm TDFN The KTD2027BEWE-TR is a highly integrated, low-power RGB LED driver designed for portable and battery-powered applications. It features a compact WLCSP package and provides precise current control for up to three LED channels. The device includes an I²C-compatible interface, enabling flexible control of brightness, color mixing, and lighting effects. Integrated features such as programmable current sinks, dimming control, and built-in protection mechanisms make it suitable for indicators, backlighting, and decorative lighting in consumer electronics. Key Features Triple-channel constant current LED driver (RGB support) I²C-compatible digital interface Independent brightness control per channel Programmable current up to ~24 mA per channel Built-in PWM dimming and pattern generation Low quiescent current for power-sensitive applications Wide input voltage range Thermal shutdown and overcurrent protection Small WLCSP package (suitable for compact designs) Applications Mobile devices and wearables Status indicators and notification LEDs Backlighting and decorative lighting IoT and portable electronics Absolute Maximum Ratings Supply Voltage (VDD): −0.3 V to +6.0 V Logic Input Voltage: −0.3 V to VDD + 0.3 V Operating Temperature Range: −40°C to +85°C Storage Temperature Range: −55°C to +150°C Recommended Operating Conditions Supply Voltage (VDD): 1.8 V to 5.5 V LED Forward Voltage: Dependent on external LEDs Ambient Temperature: −40°C to +85°C Electrical Characteristics (Typical) Supply Current (Idle): < 1 µA (shutdown mode) Channel Current Accuracy: ±5% (typical) Maximum Output Current: ~24 mA per channel I²C Clock Frequency: Up to 400 kHz (Fast Mode) Functional Description The KTD2027BEWE-TR operates as a constant-current sink driver for RGB LEDs. Each channel can be independently programmed via the I²C interface to control brightness and enable dynamic lighting effects. Internal PWM generators allow smooth dimming without requiring continuous microcontroller intervention. The device also integrates protection features such as thermal shutdown and current limiting to ensure reliable operation. Pin Configuration (Typical WLCSP) VDD – Power supply GND – Ground SDA – I²C data line SCL – I²C clock line LED1 – Current sink output (Red) LED2 – Current sink output (Green) LED3 – Current sink output (Blue) Package Information Package Type: WLCSP (Wafer-Level Chip Scale Package) Mounting: Surface mount Tape & Reel: Yes (TR suffix) Ordering Information KTD2027BEWE-TR: Tape and reel packaging for automated assembly #commonpartslibrary #integratedcircuit #leddriver

25 Hz ~ 20 kHz Analog Microphone MEMS (Silicon) 1.5 V ~ 3.63 V Omnidirectional (-32dB @ 94dB SPL) Solder Pads The ICS-40730 is a high-performance analog MEMS microphone designed for precision audio capture in compact electronic systems. It integrates a micro-electromechanical sensing element with an internal impedance conversion amplifier, providing a stable analog output suitable for direct interfacing with audio processing circuits. The device is optimized for applications requiring high signal integrity, low noise, and consistent performance across a wide frequency range. Its small form factor and surface-mount package make it ideal for space-constrained designs such as portable electronics, embedded systems, and industrial sensing equipment. Key Features Omnidirectional microphone response Low noise floor for high signal clarity Wide dynamic range for accurate sound reproduction Analog output interface Surface-mount package for automated assembly Stable performance over temperature variations Electrical Characteristics Supply voltage range suitable for low-power systems Low current consumption for energy-efficient operation High signal-to-noise ratio enabling clear audio capture Consistent sensitivity across operating conditions Acoustic Performance Omnidirectional pickup pattern Flat frequency response over the audible range High acoustic overload point for handling loud sound sources Low total harmonic distortion Mechanical Characteristics Compact surface-mount package Designed for reflow soldering processes Robust structure for reliable operation in portable devices Environmental Specifications Operational across standard industrial temperature ranges Resistant to typical humidity and environmental conditions encountered in consumer and industrial electronics Applications Voice-enabled devices Audio recording systems Industrial monitoring equipment Smart home and IoT devices Portable and wearable electronics Compliance and Standards Designed to meet common environmental and electronic component compliance requirements for modern electronic assemblies #commonpartslibrary #audio #microphone #analog

EEPROM Memory IC 256Kbit I2C 1 MHz 450 ns 8-SO The M24256E-FMN6TP is a 256-Kbit (32 Kbyte) I²C-compatible serial EEPROM from STMicroelectronics. It is designed for reliable, non-volatile data storage in a wide range of electronic applications including consumer, industrial, and automotive systems. The device supports standard (100 kHz), fast (400 kHz), and fast-mode plus (1 MHz) I²C communication, enabling efficient data transfer. It features byte and page write operations, low power consumption, and a high endurance of write cycles, making it suitable for frequent data logging and configuration storage. Housed in a compact SO8 package, the device is optimized for space-constrained PCB designs while maintaining robust performance and data retention capabilities. Key Features Memory size: 256 Kbit (32 Kbyte) Interface: I²C (2-wire serial interface) Clock frequency: Standard mode: 100 kHz Fast mode: 400 kHz Fast-mode Plus: 1 MHz Supply voltage range: 1.7 V to 5.5 V Page write capability: up to 64 bytes Write cycle time: ~5 ms (typical) Data retention: > 200 years Endurance: > 4 million write cycles Hardware write protection available ESD protection and latch-up immunity Functional Description The device operates as a slave on the I²C bus and supports: Byte write and read Page write (up to 64 bytes) Random and sequential read operations Memory addressing is internally managed using a 16-bit address pointer, allowing access to the full 32 KB memory array. The device includes an internal write cycle controller, eliminating the need for external timing management. Pin Configuration (SO8 Package) A0, A1, A2: Device address inputs VSS: Ground SDA: Serial data line SCL: Serial clock line WC: Write control (hardware write protection) VCC: Supply voltage Absolute Maximum Ratings Supply voltage (VCC): -0.3 V to 6.5 V Input voltage: -0.3 V to VCC + 0.6 V Storage temperature: -65°C to +150°C Operating temperature (industrial grade): -40°C to +85°C Electrical Characteristics Low standby current: < 1 µA (typical) Operating current: < 1 mA Input/output compatible with CMOS logic levels Schmitt trigger inputs for noise immunity Timing Characteristics Write cycle time: 5 ms (typical) Fast-mode Plus support up to 1 MHz Sequential read supports continuous data streaming Package Information Package type: SO8 (8-lead Small Outline) Mounting: Surface-mount (SMD) Tape & reel packaging (TP suffix) Applications Configuration storage Calibration data storage Data logging systems Industrial control systems Consumer electronics Embedded systems requiring non-volatile memory Advantages High endurance and long data retention Wide voltage range (ideal for mixed-voltage systems) Compact footprint High-speed I²C compatibility (up to 1 MHz) #commonpartslibrary #integratedcircuit #memory

Buck Switching Regulator IC Positive Adjustable 0.8V 1 Output 3A 24-WFQFN Exposed Pad General Description: The RTQ2105GQWT-QA is an electronic component designed for integration into compact and efficiency-focused circuit applications. It is engineered to deliver stable performance under varying operating conditions, making it suitable for use in consumer electronics, embedded systems, and power management solutions. The device emphasizes reliability, low power consumption, and consistent signal or power regulation, depending on its intended application within a system. Its form factor supports space-constrained designs while maintaining thermal and electrical stability. Functional Overview: The component provides controlled operation within a defined electrical range, ensuring dependable interaction with surrounding circuitry. It is optimized for seamless compatibility with standard board layouts and commonly used electronic assemblies. The design supports continuous operation with minimal performance drift and is built to handle typical environmental and electrical stresses encountered in modern devices. Electrical Characteristics: The device operates within a specified voltage and current range appropriate for low-power or signal-level applications. It maintains stable output behavior across its operating conditions and includes internal features that support protection, regulation, or signal integrity as required by its functional role. Mechanical Characteristics: The component is housed in a compact package suitable for surface-mount technology. Its physical structure is designed to facilitate automated assembly and secure placement on printed circuit boards. The package ensures adequate heat dissipation and mechanical durability during normal operation. Environmental Considerations: The RTQ2105GQWT-QA is designed to function reliably across a standard range of environmental conditions, including variations in temperature and humidity. It complies with common industry expectations for durability and long-term use in electronic systems. Application Guidelines: This component is intended for use in systems requiring efficient, stable, and compact electronic solutions. Proper circuit design practices should be followed to ensure optimal performance, including appropriate layout, grounding, and thermal management considerations. Compliance and Standards: The device is manufactured in accordance with relevant industry standards for electronic components, supporting quality, safety, and environmental requirements. #commonpartslibrary #integratedcircuit #powermanagement

Rotary Encoder Incremental 24 Quadrature (Incremental) User Selectable 10 mA @ 5 VDC,-10 C to +70 C The PEC11J-9015F-S0024 is a compact surface-mount incremental rotary encoder from the Bourns PEC11J series, designed for user interface applications requiring precise rotational input and long operational life. It features a quadrature output with 24 pulses per revolution and includes an integrated momentary push-button switch, making it suitable for menu navigation, volume control, tuning systems, and industrial control panels. Its rugged metal shaft construction and high durability make it reliable for both consumer and professional electronic equipment. Key Features Incremental rotary encoder with 2-bit quadrature output 24 pulses per revolution (24 PPR) resolution Integrated momentary push-button switch Surface-mount gull-wing terminals Compact 12 mm encoder body Durable metal shaft and bushing Long rotational life of up to 100,000 cycles No detents for smooth continuous rotation Supports up to 60 RPM operating speed Operating temperature range: -10 °C to +70 °C IP40 rated enclosure Flatted shaft design for secure knob attachment Suitable for: Audio equipment Lighting consoles Consumer appliances Communication devices Test and measurement equipment Component Category #Sensor #Encoder #Transducer #PEC11J