The Junior line-following robot, equipped with photoresistors and an operational amplifier, is capable of detecting and following lines with precision. This compact and efficient robot uses photoresistors to capture contrast information on the ground and, through the operational amplifier, quickly processes this data to adjust its trajectory. It's an ideal tool for introducing students to the world of robotics and engineering. // El robot seguidor de línea Junior, equipado con fotoresistencias y un amplificador operacional, es capaz de detectar y seguir líneas con precisión. Este robot compacto y eficiente utiliza las fotoresistencias para captar la información de contraste en el suelo y, mediante el amplificador operacional, procesa rápidamente estos datos para ajustar su trayectoria. Es una herramienta ideal para introducir a estudiantes en el mundo de la robótica y la ingeniería.

The HOTCHIP HT4936S is a sophisticated mobile power management integrated circuit designed by Hotchip, optimized for portable power solutions that require efficient charging and power management capabilities. This advanced component integrates features for charging and discharging through a common port, automatic load detection for boost startup and shutdown, four-light battery level indication, and a low battery alert functionality. The HT4936S stands out for its ability to manage 1A input/output with minimal external components, leveraging synchronous rectification to enhance efficiency and reduce thermal footprint. Additionally, it supports a versatile charging protocol accommodating both 4.20V and 4.35V batteries, and is packaged in a compact SOP16 form factor, ensuring a low-cost, space-efficient solution for a wide range of mobile power applications including power banks, backup power supplies, and lithium battery chargers. It incorporates protection features against battery overcharge, over-discharge, and thermal overload, thereby ensuring reliable operation across a range of conditions. Furthermore, the HT4936S facilitates direct LED drive and includes an NTC thermistor input for temperature monitoring, making it an all-encompassing solution for power management in consumer electronics.

This is a reference design of the Bluetooth Low-Energy (BLE) temperature sensor. It uses an ESP32-MINI-1 microcontroller to connect to an SHT31-DIS-B2.5KS sensor. The sensor can be powered through connector J15, and additional components provide voltage regulation and derbiaising. Temperature data can be accessed via BLE. #referenceDesign #simple-embedded #espressif #template #reference-design

"This is what makes time travel possible." —Doc Brown In order to travel through time, the vehicle integrated with the flux capacitor needed to be traveling at 88 mph (140.8 km/h), and required 1.21 gigawatts of power (1,210,000,000 watts)

Sensor using through hole LDR and power with SMT LED Resistors and PZT3904

Sensor using through hole LDR and power with SMT LED Resistors and PZT3904

This project is a Smart Thermostat design using an ESP32 module for WiFi connectivity and a BME680 sensor for environmental monitoring. The user interface includes an E-ink display and an encoder for settings adjustment. Power is managed through a USB-C connector with a 3.3V regulator. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #thermostat #referenceDesign #edge-computing #edgeComputing #espressif #template #reference-design

A passive two-terminal electrical component that stores energy in a magnetic field when electric current flows through it. See https://en.wikipedia.org/wiki/Inductor

Through Hole straight pin header, 01x04, 2.54mm pitch, single row #connector #pinheader #tht

This project is a Battery Management System (BMS) built around STMicroelectronics' STC3115AIQT battery monitor IC. It uses I2C for communication, features alarm management, and supports battery charging. The power supply, battery connection points, and debug interface are facilitated through connectors. #project #Template #charger #monitor #reusable #module #batterycharger #template #bms #STC3115 #stm

3 Position Wire to Board Terminal Block Horizontal with Board 0.197" (5.00mm) Through Hole #screwblock #connector #commonPartsLibrary

"This is what makes time travel possible." —Doc Brown In order to travel through time, the vehicle integrated with the flux capacitor needed to be traveling at 88 mph (140.8 km/h), and required 1.21 gigawatts of power (1,210,000,000 watts)

Here is a simple USB powered lamp that can be used to light your desktop during power failures. The circuit operates from the 5 Volt available from the USB port. The 5V from the USB port is passed through current limiting resistor R2 and transistor Q1. The base of transistor Q1 is grounded via R1 which provides a constant bias voltage for Q1 together with D2. The diode D1 prevents the reverse flow of current from battery. C1 is used as a noise filter. Two white LED’s are used here for the lamp, you can also use a 2 V torch bulb instead of LED’s. LED D3 indicates connection with USB port.

This is an NFC card that works from the solar. On the board, there are two solar panels that accumulate energy through the controller in the supercapacitor. The NFC controller itself can be programmed via the microcontroller on the board #solar #nfc #stm32 #iot

A semiconductor light source that emits light when current flows through it.

This project is a TCS3200D-TR color sensor circuit utilizing resistors, capacitors, LEDs, a JST connector, and a transistor for control. The color sensor allows for precise color identification and its output is accessible through a JST connector. #industrialSensing #colorSensor #referenceDesign #osramusa #template #reference-design

"This is what makes time travel possible." —Doc Brown In order to travel through time, the vehicle integrated with the flux capacitor needed to be traveling at 88 mph (140.8 km/h), and required 1.21 gigawatts of power (1,210,000,000 watts)

This project is a reference design for the VCNL3040 sensor interfaced via I2C. It includes a VCNL3040 ambient light sensor, a voltage regulator (AP2112K-3.3TRG1), an I2C level shifter using BSS138 MOSFETs, and necessary support components. Circuit interfaces through a JST connector. All components are powered by a 3.3V power source. #referenceDesign #industrialsensing #vishay #template #reference-design

Sensor using through hole LDR and power with SMT LED Resistors and PZT3904

This is an Energy Meter project leveraging an ATTiny85 microcontroller (U1) to sense current through an ACS712 module (U2). It displays the data in real-time on an OLED display (OLED1) and interacts with three buttons (NEXT, MENU, OK). This compact energy meter is suitable for edge computing and low-power Internet of Things (IoT) applications #project #keypad #arduino #attiny85 #ISP #referenceDesign #edge-computing #edgeComputing #microchip #template #reference-design

Connector Header Through Hole 2 position 0.079" (2.00mm) 01x02 JST B2B PH K

This is an Energy Meter project leveraging an ATTiny85 microcontroller (U1) to sense current through an ACS712 module (U2). It displays the data in real-time on an OLED display (OLED1) and interacts with three buttons (NEXT, MENU, OK). This compact energy meter is suitable for edge computing and low-power Internet of Things (IoT) applications #project #keypad #arduino #attiny85 #ISP #referenceDesign #edge-computing #edgeComputing #microchip #template #reference-design

sEMG-DAQ is a wearable 6 channel data acquisition unit for capturing surface electromyographic (sEMG) signals from human arm muscles using SJ2-3593D jack connectors while conditioning, digitizing, processing and transmitting them as sEMG data to an external AI accelerated board through an SM12B-SRSS IDC connector where AI models are run for various applications including robotic control, muscle signals medical assessment and gesture recognition. The board leverages an INA125P instrumentation amplifier together with filter stages utilizing LM324QT op-amps for conditioning and an STM32G4A1VET6 microcontroller for the digitization, processing and data transmission of the signals. Since AI models can only be as good as the data, the design of such a DAQ is necessary to ensure clean, reliable and real-time data for AI applications requiring sEMG data. The board also has USB-FS and JTAG to cater for debugging. The power (5V) is fed through a screw terminal and is regulated by two LDK320AM LDO regulators to offer 5V, 3.3V and 1.8V to meet the requirements of various components on the board.

Standalone USB-C PD sink power distribution board that autonomously requests a fixed 20 V contract and provides simultaneous protected 12 V/3 A and 5 V/2 A outputs through separate 5.08 mm screw terminals.

Through-hole 9V battery-powered 555 timer circuit that blinks a red LED about once per second through an on/off switch.