Change History from V1: -13.56MHz tuning -larger instruction font -put some stuff on the back #template I wanted to create a business card that has some functionality and shows off a bit of my portfolio IRL: -NFC to my flux page -here's the [instructables](https://www.instructables.com/PCB-Business-Card-With-NFC-Make-Yours-With-NFC-QR-/) -Put a bunch of modules on it Find the BoM [here](https://www.digikey.com/short/2db2vnmp)

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

A simple fixed linear voltage regulator board that can provide 3.3V up to 1A output and could operate down to 1V input-to-output differential. #firstpcbFlux

Design challenge: build a new PCB exclusively with Flux Copilot. Each day for 30 days, I'm using a new Copilot prompt to design a board with the RP2040. Follow the Twitter thread: https://twitter.com/ntzova/status/1671868701954519041

Template for Arduino Uno R3 Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Uno R3 itself along with the board outline on the silkscreen. #Arduino #Uno #Shield #Template #project-template #project

Designing a Tractive System Active light(TSAL) circuit for an Electric Vehicle which does the following operations 1. The TSAL itself must have a red light, flashing continuously with a frequency between 2 Hz and 5 Hz and a duty cycle of 50%, active if and only if the LVS is active and the voltage across DC-link capacitors exceeds half the nominal TS voltage 2. The TSAL itself must have a green light, continuously on, active if and only if the LVS is active and ALL of the following conditions are true: ● All AIRs are opened. ● The pre-charge relay is opened. ● The voltage at the vehicle side of the AIRs inside the TSAC does not exceed 60 VDC or 50 VAC RMS. This schematic will include only the Green Light logic. We have to take proper care of High voltage and Low voltage isolation in this schematic because it will have to be implemented on the PCB as well.

Template for Arduino Uno R3 Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Uno R3 itself along with the board outline on the silkscreen. #Arduino #Uno #Shield #Template #project-template #project

Template for Arduino Uno R3 Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Uno R3 itself along with the board outline on the silkscreen. #Arduino #Uno #Shield #Template #project-template #project

Template for Arduino Uno R3 Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Uno R3 itself along with the board outline on the silkscreen. #Arduino #Uno #Shield #Template #project-template #project

This project included the schematic and PCB layout of a coil winding machine circuit board. It uses Arduino Nano microcontroller, to count the number of turns and it can be used to replace manual coil winding process.

The AD8495 K-type thermocouple amplifier from Analog Devices is so easy to use, we documented the whole thing on the back of the tiny PCB. Power the board with 3-18VDC and measure the output voltage on the OUT pin. You can easily convert the voltage to temperature with the following equation: Temperature = (Vout - 1.25) / 0.005 V. So for example, if the voltage is 1.5VDC, the temperature is (1.5 - 1.25) / 0.005 = 50°C with terminal block connections

The Pico Macro Keyboard is a compact and powerful macro pad built using the latest Raspberry Pi Pico 2. Inspired by the Figma Creator Micro, this keyboard is designed for customizable control and enhanced productivity. It features mechanical switches with per-key RGB lighting, along with two rotary encoders for added functionality. With a modular 4-layer PCB and fully customizable keymaps, it seamlessly integrates with any software, making it perfect for designers, gamers, and power users alike.

Template for Arduino GIGA R1 WiFi Shield. On PCB you can find the board outline on the silkscreen. #Shield #Arduino #GIGA #STM32H7 #STM32H747XI #template #project #project-template #ABX00063

This is the circuit my team and I built for my Junior Design Project. I decided to make a PCB for it.

Diseño PCB L293B

PCB Board for GearWorx Helmet Sanitizer Vending Machine

This is a reference design of a PCB utilizing the TMF8801-1BM time-of-flight (ToF) sensor from ams-OSRAM. It comprises electronic components such as resistors, capacitors, voltage regulators, and GPIO connectors. The logic signals are managed via Mosfets BSS138 while the Sensor IC is powered & controlled by a 3.3V AP2112K Voltage Regulator. #industrialSensing #referenceDesign #lzer #I2C #osramusa #template #reference-design

A simulated blinking LED circuit using an astable multivibrator a.k.a "flip-flop" as a square wave generator. It also includes PCB layout of the project.

NodeMCU V3 ESP8266 ESP-12E is WiFi development board that helps you to prototype your IoT product with few Lua script lines, or through Arduino IDE. The board is based on ESP8266 ESP-12E variant, unlike other ESP-12E, you won’t need to buy a separate breakout board, usb to serial adapter, or even solder it to a PCB to get started, you will only need a usb cable (Micro USB).

Passive connector-hub PCB for UniPi 1.1 plant-watering wiring with 1:1 internal breakout, ATX 24-pin power entry, configurable 0-ohm power forwarding, and external 3.81 mm field connectors in a 30 x 40 mm enclosure.

Low-power USB-C powered environmental sensor node with a protected 5 V USB-C sink input, TPS26630 front-end protection for reverse/OVP/UVLO/OCP, efficient 3.3 V buck regulation, ESP32-C3 Wi-Fi plus BLE connectivity, and an I2C SHT41 temperature/relative-humidity sensor. The design targets robust operation from USB-C sources advertising 0.5 A to 3 A and is being completed as a schematic ready for PCB layout.