PCB con un MCU diseñado para conectar un PC con el control de un auto RC de juguete. El MCU recibe mensajes UART del PC que indican comandos direccionales (adelante, atrás, izquierda, derecha) y activa uno de cuatro pines GPIO para simular pulsaciones de botones en el control del auto RC.

PCB con un MCU diseñado para conectar un PC con el control de un auto RC de juguete. El MCU recibe mensajes UART del PC que indican comandos direccionales (adelante, atrás, izquierda, derecha) y activa uno de cuatro pines GPIO para simular pulsaciones de botones en el control del auto RC.

Placa filha/interface Sintevox para soquete SC-01 usando Bluepill STM32F103, adaptação A/R 5V e filtro RC de áudio PWM.

Carrier/interconnect PCB for Hypex DSA254 with Bela Gem inputs 6–9, SMPS1200A400 power/control connectors, four speaker outputs, test pads, and optional DNP input suppression.

Robust 6-channel TTL integration board for Arduino Mega 2560 interrupt inputs, with protected BNC inputs, 24V-compatible comparator translation, manual triggers, status LEDs, inverse-logic control, and enable control.

PIC16F877A-based load-cell measurement system using an HX711 24-bit ADC, 4 MHz crystal clock, load-cell connector, ICSP programming header, regulated 5V input, and low-noise PCB layout for internship deliverables.

Fortunate Moccasin Lightcycle - Added isolated AMS1117-3.3 regulator module (VIN/3V3/GND header) with input/output capacitors; not connected to existing nets

Template for Raspberry Pi 5 Model Shield. Include an official pinout so you will always know Raspberry Pi names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Raspberry Pi itself along with the board outline on the silkscreen. #RaspberryPi #Raspberry #RaspberryPi5 #raspberry #Pi #RPi #Shield #template #project #project-template

This project is a controller module that uses the ESP32-WROOM-32E and the MAX3485 to communicate with Modbus devices. It has a USB-C port for power and data, a voltage regulator for stable operation. It also has a CH340C chip for USB to serial conversion. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #template #MAX3485 #RS485 #maximintegrated

2.8inch SPI Module ILI9341 support 65K color. With SD card slot SKU:MSP2807

Welcome to your new project. Imagine what you can build here.

Segger J- Link

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

The "Green Dot 2040E5" Board is a Node that interfaces RS485 Sensor probes and can log information to the cloud using LoRa Connectivity. It uses the XIAO RP2040 and the LoRa-E5 (STM32WLE5JC) modules from Seeed Studio to do its magic. It also has amazing power management capabilities (Solar charging, Battery protection, etc) that make it very useful for IoT applications #Seeed #XIOA #LoRa #RP2040 #IoT

A circuit for a gps tracker using stm32f103c8t6 and sim 808, that acquires and sends gps coordinates to a separate interfaced application. The circuit will be powered by a 12v dc battery so there a need for power regulation. there is a USB type micro B for code uploading.

The "Green Dot 2040E5" Board is a Node that interfaces RS485 Sensor probes and can log information to the cloud using LoRa Connectivity. It uses the XIAO RP2040 and the LoRa-E5 (STM32WLE5JC) modules from Seeed Studio to do its magic. It also has amazing power management capabilities (Solar charging, Battery protection, etc) that make it very useful for IoT applications #Seeed #XIOA #LoRa #RP2040 #IoT

OBD2 to UART interface dev board. Alternative to deprecated ELM237 Chipset. Documentation: - Power tree: https://drive.google.com/file/d/1oG5_56AuaiLtG3buUaOyhg63TMySnYF3/view?usp=sharing

Software: Linux Power Requirements: LiPo battery powered Compliance: RoHS Connectivity: USB, WiFi, Bluetooth, Ethernet Human Interface: Joystick, Display Operating Voltage: 3.3V, 5V, 9V Operating Temp: -40 to +85C Reliability: 10,000hrs MTBF Target Cost: $100

Portable Audio DSP project utilizing multiple ICs, capacitors, resistors, and LEDs for advanced audio processing and control. Designed for embedded audio applications with ESP32, ADC, DAC, and interface components. #DSP #ADC #audio #DAC

The TCA9555 is a 16-bit I/O expander for the 1.65-V to 5.5-V Vcc operation designed by Texas Instruments. It serves to enhance the general-purpose remote I/O expansion for most microcontroller families via the I2C interface. Key features of the TCA9555 include low standby-current consumption, 5-V I/O ports, 400-Khz fast I2C bus, and ESD protection. It finds applications across personal computers, servers, routers, industrial automation equipment, and products with GPIO-limited processors.

The component under discussion is designed for advanced electronic systems, targeting applications that require reliable connectivity and precise data acquisition. Engineered by SEMTECH, a leader in high-performance analog and mixed-signal semiconductors and advanced algorithms, this module showcases its prowess in the realm of wireless technology. It incorporates the LR112x series chips, specifically mentioning the LR1120 and LR1121, which are notable for their low power consumption and robustness in communication capabilities. These chips cater to a variety of frequency bands, with explicit mentions of R915 and R868, indicating their suitability for a broad range of geographical regions and regulatory requirements. This module is particularly designed with an eye towards innovation in the domain of Internet of Things (IoT) applications, offering features that ensure seamless integration into existing technology with an emphasis on ease of deployment and operational efficiency. Key features highlighted include multiple onboard antennae options such as ANT_GNSS and ANT_WIFI, ensuring comprehensive connectivity solutions for different environmental and application requirements. Also notable is the mention of a VOD_RADIO and the inclusion of interfaces like SPI and BUSY signaling, underscoring the component's flexibility in system integration and communication protocol support. Furthermore, SEMTECH references specific considerations for design and regulatory compliance, indicating the component's targeted use in professional grade equipment and scenarios. The datasheet also hints at an evaluation-focused approach, with designations like "For evaluation only" and remarks on FCC approval status, suggesting that this component is positioned for development and testing in cutting-edge wireless applications. This focus on flexibility, regulatory compliance, and advanced connectivity options positions SEMTECH's component as a crucial asset for designers and engineers looking to innovate in the IoT and wireless communication sectors.

Compact ESP32-S3 Smart Glasses Starter PCB with OV2640 Camera, I2C Mux, I2S Audio, LiPo Charging, and USB-C Debug Interface

The "Green Dot 2040E5" Board is a Node that interfaces RS485 Sensor probes and can log information to the cloud using LoRa Connectivity. It uses the XIAO RP2040 and the LoRa-E5 (STM32WLE5JC) modules from Seeed Studio to do its magic. It also has amazing power management capabilities (Solar charging, Battery protection, etc) that make it very useful for IoT applications #Seeed #XIOA #LoRa #RP2040 #IoT

This Gerber file contains the necessary information for fabricating the PCB design of a Bluetooth-enabled headphone. The design includes multiple layers, showcasing the electrical connections and component placements on both the top and bottom layers. Top Layer (Copper traces and components): The top copper layer is primarily responsible for routing the signals from key components such as the ESP32 module, MAX98357A audio amplifier, and the microphone. The ESP32 module, responsible for Bluetooth communication, is positioned centrally to optimize signal flow and minimize interference. Decoupling capacitors (100nF) are placed near critical components to ensure signal stability and noise suppression. Audio signal paths, as well as power distribution, are carefully routed to prevent cross-talk and ensure high-quality sound. Bottom Layer (Copper traces): The bottom layer contains the ground plane and additional routing for power and signal connections. The charging module (TP4056) and voltage regulator (AMS1117) are placed to manage power distribution, ensuring stable battery charging and regulated output for the ESP32 and other components. Connections to external interfaces such as the MicroSD breakout and auxiliary input are routed efficiently to avoid conflicts. Additional Components: All critical components are labeled, including decoupling capacitors (100nF) and resistors where needed, as well as external interfaces like the MicroSD card breakout. Mounting holes are provided for secure installation in a headphone casing, ensuring the board can be integrated seamlessly into the final product. The PCB is designed to minimize noise, with short signal paths and proper grounding for high-fidelity audio performance. This Gerber file ensures accurate manufacturing by containing data for copper layers, silkscreen, solder mask, and drill files.