This project is a USB stick PC design utilizing key electronic components such as the STM32MP157FAC1 microprocessor, ESP32-C3-WROOM-02-N4 module, and MT41K256M16TW-107:P DDR3 RAM, enabling portable computing capabilities.

This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control. #WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design

This is a ESP32-C6-WROOM-1 reference design built on manufacture recommendations. Here is on board an ESP32-H2-MINI-1 module, RESET and BOOT buttons, RGB LED, and 2 connectors for IOs #ESP32 #WiFi #IoT #ARM #referenceDesign #simple-embedded #espressif #template #reference-design

AvocAudio is a compact tinyML community board designed for extensive audio data collection for various tinyML applications. It leverages the Raspberry Pi RP2040 and integrates a LoRa-E5 LoRaWAN Transceiver Module for connectivity. Equipped with an SD card slot for local data storage, the board ensures efficient data collection. The board operates on solar power or a lithium-ion battery, ensuring flexible and efficient energy use. #raspberryPi #rp2040 #lorawan #iot #solar

This is example board for creating cool projects with stm32 (this board based on STM32F031F6P6) #stm32 #arm #f0 #module

This is a ESP32-C6-MINI-1U reference design built on manufacture recommendations. Here is on board an ESP32-H2-MINI-1 module, RESET and BOOT buttons, RGB LED, and 2 connectors for IOs #ESP32 #WiFi #IoT #ARM #referenceDesign #simple-embedded #espressif #template #reference-design

This is the multipurpose PCB that works with Arduino Nano, a way that you can run 2 Stepper motors, 2 DC motors, 2 Servo motors at the same time and this is not it you can even connect BT module, rotary encoder, I2C device, potentiometer at same time. This PCB is very much helpful in building any project and no need to worry about messy wire connections.

A presence sensing device powered by a mean well AC DC converter with a ESP32 C3 for it's brain plus a ld2410 mmwave module. the relay can be used to switch mains power. the ld2410 is connected through the terminal connectors.

TPS61090 - DC/DC, Step Up 1, Non-Isolated Outputs Evaluation Board #PowerBoost #Charger #EvaluationBoard #module

This is a ESP32-H2-MINI-1U reference design built on manufacture recommendations. Here is on board an ESP32-H2-MINI-1 module, RESET and BOOT buttons, RGB LED, and 2 connectors for IOs #ESP32 #WiFi #IoT #ARM #referenceDesign #simple-embedded #espressif #template #reference-design

This project is a Bluetooth Low Energy (BLE) gas leakage detection system. It uses a BME680 sensor from Bosch Sensortec for gas detection and a BMD-330-A-R module from U-blox for BLE communication. It also features a user interaction button, RGB signaling LED, and is powered by two non-rechargeable AA batteries. #BLE #MCU #ReferenceDesign #project #referenceDesign #simple-embedded #ublox #template #reference-design #polygon

This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control. #WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design

This is a Pet Tracker Reference Design based on STM32L4. Tracker connects with network by SIM800L module connected to the STM. Also MCU connected to the GPS by uart and send data to server #STM32 #GPS #G4 #G3 #LTE #IoT #Tracker #referenceDesign #edge-computing #edgeComputing #stm #template #reference-design

This is a reference design of ESP32-C3-MINI-1 based on the manufacturer's recommendations. On board we have an ESP module, USB C for firmware, 2 connectors with IOs and RGB LED #ESP32 #WiFi #LED #IoT #BLE #ARM #referenceDesign #simple-embedded #espressif #template #reference-design

Super tiny ESP32-C3 board #Module #ESP32

This is a WiFi relay board based on ESP32-H2 WiFi module. It have AC-DC power supply with output 12V and relay for controlling voltage #esp32 #project #Relay #wifi #esp32-h2 #iot #template

This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control. #WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #referenceDesign #edgeComputing #espressif #template #reference-design

Bluetooth, WiFi 802.11b/g/n, Bluetooth v5.0 Transceiver Module 2.4GHz PCB Trace Surface Mount #commonpartslibrary #rf #wireless #transceiver #module

This project is an IoT development board based on the ESP32-H2-WROOM-03 module, featuring USB-C connectivity for power and communication. The board also includes two buttons, several decoupling capacitors, and a couple of connectors for peripheral connections. The onboard USB-to-UART bridge facilitates communication with a host device. #referenceDesign #esp32 #iot #esp32-h2 #project #template #reference-design

connent ESP32-WROOM-32 microcontroller with 10 BME688 sensors using CD74HC4066: Type: 4-Channel Analog Multiplexer and RAK811 LORA module

This is the multipurpose PCB that works with Arduino Nano, a way that you can run 2 Stepper motors, 2 DC motors, 2 Servo motors at the same time and this is not it you can even connect BT module, rotary encoder, I2C device, potentiometer at same time. This PCB is very much helpful in building any project and no need to worry about messy wire connections.

This project is a communication device designed with Adafruit's 3857 Microcontroller (U1) and Hoperf's RFM95W-915S2 RF module (U2). The microcontroller interfaces with the RF module via SPI protocol for wireless data transmission. The project also includes a capacitor (C1) and an SMA connector (J1). #LoRa #IoT #project #M4 #Adafruit

Glucose meter is a medical device that determines the approximate concentration of glucose in the blood. A strip containing chemicals that react with glucose in the drop of blood is used for each measurement. Op Amp Circuit description: LMC6484 IC_D is an integrator circuit. LMC6484 IC_A and IC_C are configured as unity gain buffer amplifiers. LMC6484 IC1B is configured as a trans impedance amplifier. Arduino is used for processing of the measured glucose level. The Arduino use the built in ADC module for analog to digital conversion. Further, the Arduino helps to detect the strip also.

Bluetooth, WiFi 802.11b/g/n, Bluetooth 4.2 Transceiver Module 2.412GHz ~ 2.484GHz Antenna Not Included, I-PEX Surface Mount #Module #RF #Transceiver #bluetooth #Wifi

To optimize your 4-layer board manufacturing process with Seeed Studio Fusion, utilize this comprehensive template. It incorporates a majority of the essential manufacturing constraints as global rules, ensuring a smoother and more efficient production workflow. #project-template #template #manufacturer-design-rules This project is a vessel monitoring system built using Seeed Studio Xiao Sense, Xiao Expansion Board with OLED, a UART WiFi module, a normally open float switch, and a UART SIM800L cellular module. The system displays a 30-second countdown on the OLED screen, calibrates the IMU sensor, converts to Euler angles, and stores these values for comparison with future readings. It also sets up the WiFi module as an access point to configure the vessel's name, contact numbers, and angle thresholds for list and trim notifications. Reports are sent at specified times via the cellular module.