• Make a first PCB: Random number generator circuit

    Make a first PCB: Random number generator circuit

    Welcome to your new project. Imagine what you can build here.

    greg

    greg

    &

    crystal228532

    3 Comments

    1 Star

  • UA PCB

    UA PCB

    Welcome to your new project. Imagine what you can build here.

    vasyl

    vasyl

    1 Comment

    1 Star

  • MIDI controller PCB Clone 0

    MIDI controller PCB Clone 0

    Welcome to your new project. Imagine what you can build here.

    vasy_skral

    vasy_skral

    1 Comment

    1 Star

  • MIDI controller PCB Clone 5

    MIDI controller PCB Clone 5

    Welcome to your new project. Imagine what you can build here.

    vasy_skral

    vasy_skral

    1 Comment

    1 Star

  • KontrolSound Keyboard PCB

    KontrolSound Keyboard PCB

    Basic project template for RP2040 MCU from Raspberry Pi Pico Development board #RaspberryPi #Raspberry #Pi #RPi #Pico #template #project #project-template

    giulioz

    giulioz

    1 Comment

    1 Star

  • MIDI controller PCB clone for devs 2 extra trace segment

    MIDI controller PCB clone for devs 2 extra trace segment

    Welcome to your new project. Imagine what you can build here.

    vasy_skral

    vasy_skral

    &

    nico
    giulioz

    1 Comment

    1 Star

  • MIDI controller PCB clone for devs

    MIDI controller PCB clone for devs

    Welcome to your new project. Imagine what you can build here.

    vasy_skral

    vasy_skral

    1 Comment

    1 Star

  • ESP32 RC Car PCB and schema final

    ESP32 RC Car PCB and schema final

    Template for ESP32 DEV KIT V1 #template #project-template #esp32 #microcontrollers

    guyrobotics

    guyrobotics

    &

    guyhadad

    1 Star

  • ESP32 RC Car PCB and schema final 0103

    ESP32 RC Car PCB and schema final 0103

    Template for ESP32 DEV KIT V1 #template #project-template #esp32 #microcontrollers

    guyhadad

    guyhadad

    1 Star

  • draft PCB 1

    draft PCB 1

    ESP32 Wrist–Hand Orthosis Controller v1.0

    vaishakkr

    1 Star

  • ESP32 RC Car PCB and schema final

    ESP32 RC Car PCB and schema final

    Template for ESP32 DEV KIT V1 #template #project-template #esp32 #microcontrollers

    guyhadad

    guyhadad

    1 Star

  • PCB Business Card V2

    PCB Business Card V2

    Change History from V1: -13.56MHz tuning -larger instruction font -put some stuff on the back #template I wanted to create a business card that has some functionality and shows off a bit of my portfolio IRL: -NFC to my flux page -here's the [instructables](https://www.instructables.com/PCB-Business-Card-With-NFC-Make-Yours-With-NFC-QR-/) -Put a bunch of modules on it Find the BoM [here](https://www.digikey.com/short/2db2vnmp)

    samanda

    &

    1 Star

  • 5_15 PCB Routing - AutoLayout - Autoroute the GPIOs

    5_15 PCB Routing - AutoLayout - Autoroute the GPIOs

    AvocAudio is a compact tinyML community board designed for extensive audio data collection for various tinyML applications. It leverages the Raspberry Pi RP2040 and integrates a LoRa-E5 LoRaWAN Transceiver Module for connectivity. Equipped with an SD card slot for local data storage, the board ensures efficient data collection. The board operates on solar power or a lithium-ion battery, ensuring flexible and efficient energy use. #audioDevices #raspberryPi #rp2040 #lorawan #iot #solar

    hasofukirsch

    1 Star

  • 5_12 PCB Routing - Fanouts

    5_12 PCB Routing - Fanouts

    AvocAudio is a compact tinyML community board designed for extensive audio data collection for various tinyML applications. It leverages the Raspberry Pi RP2040 and integrates a LoRa-E5 LoRaWAN Transceiver Module for connectivity. Equipped with an SD card slot for local data storage, the board ensures efficient data collection. The board operates on solar power or a lithium-ion battery, ensuring flexible and efficient energy use. #audioDevices #raspberryPi #rp2040 #lorawan #iot #solar

    hasofukirsch

    1 Star

  • 5_11 PCB Placement Updates

    5_11 PCB Placement Updates

    AvocAudio is a compact tinyML community board designed for extensive audio data collection for various tinyML applications. It leverages the Raspberry Pi RP2040 and integrates a LoRa-E5 LoRaWAN Transceiver Module for connectivity. Equipped with an SD card slot for local data storage, the board ensures efficient data collection. The board operates on solar power or a lithium-ion battery, ensuring flexible and efficient energy use. #audioDevices #raspberryPi #rp2040 #lorawan #iot #solar

    hasofukirsch

    1 Star

  • Laser Control PCB with USB-C and Keypad

    Laser Control PCB with USB-C and Keypad

    Welcome to your new project. Imagine what you can build here.

    kennklick

    1 Star

  • 5_01 PCB - Placement

    5_01 PCB - Placement

    AvocAudio is a compact tinyML community board designed for extensive audio data collection for various tinyML applications. It leverages the Raspberry Pi RP2040 and integrates a LoRa-E5 LoRaWAN Transceiver Module for connectivity. Equipped with an SD card slot for local data storage, the board ensures efficient data collection. The board operates on solar power or a lithium-ion battery, ensuring flexible and efficient energy use. #audioDevices #raspberryPi #rp2040 #lorawan #iot #solar

    hasofu

    &

    1 Star

  • ESP32 RC Car PCB and schema final

    ESP32 RC Car PCB and schema final

    Template for ESP32 DEV KIT V1 #template #project-template #esp32 #microcontrollers

    guyrobotics

    guyrobotics

    &

    guyhadad

    1 Star

  • 1_27 PCB Module Voltage Regulator

    1_27 PCB Module Voltage Regulator

    Welcome to your new project. Imagine what you can build here.

    hasofukirsch

    1 Star

  • 1_13 PCB Stackup and VIAs Done

    1_13 PCB Stackup and VIAs Done

    Welcome to your new project. Imagine what you can build here.

    hasofukirsch

    1 Star

  • 1_12 PCB Navigation

    1_12 PCB Navigation

    Welcome to your new project. Imagine what you can build here.

    hasofukirsch

    1 Star

  • PCB Business Card V2

    PCB Business Card V2

    Change History from V1: -13.56MHz tuning -larger instruction font -put some stuff on the back #template I wanted to create a business card that has some functionality and shows off a bit of my portfolio IRL: -NFC to my flux page -here's the [instructables](https://www.instructables.com/PCB-Business-Card-With-NFC-Make-Yours-With-NFC-QR-/) -Put a bunch of modules on it Find the BoM [here](https://www.digikey.com/short/2db2vnmp)

    shanzal

    1 Star

  • Vibratory Actuator PCB v1

    Vibratory Actuator PCB v1

    Welcome to your new project. Imagine what you can build here.

    sudhanshumungole

    1 Star

  • pcb game

    pcb game

    Welcome to your new project. Imagine what you can build here.

    nishantp12

    1 Star

  • AI test PCB

    AI test PCB

    Welcome to your new project. Imagine what you can build here.

    hintralpha

    1 Star

  • PCB inductor-sma connector flange c2de

    PCB inductor-sma connector flange c2de

    Welcome to your new project. Imagine what you can build here.

    ridhosoru

    1 Star

  • PCB 2: CPU

    PCB 2: CPU

    Welcome to your new project. Imagine what you can build here.

    utgaucir

    1 Star

  • PCB Layer View Controller with 2 layer board sdqm

    PCB Layer View Controller with 2 layer board sdqm

    A simple fixed linear voltage regulator board that can provide 3.3V up to 1A output and could operate down to 1V input-to-output differential. #firstpcbFlux

    fluxappcitestuser

    1 Star

  • 30 prompts in 30 days

    30 prompts in 30 days

    Design challenge: build a new PCB exclusively with Flux Copilot. Each day for 30 days, I'm using a new Copilot prompt to design a board with the RP2040. Follow the Twitter thread: https://twitter.com/ntzova/status/1671868701954519041

    nico

    nico

    73 Comments

    1 Star

  • Arduino Uno R3 Shield Template 31vK

    Arduino Uno R3 Shield Template 31vK

    Template for Arduino Uno R3 Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Uno R3 itself along with the board outline on the silkscreen. #Arduino #Uno #Shield #Template #project-template #project

    fer514

    66 Comments

    1 Star

  • TSAL_KE1_Green

    TSAL_KE1_Green

    Designing a Tractive System Active light(TSAL) circuit for an Electric Vehicle which does the following operations 1. The TSAL itself must have a red light, flashing continuously with a frequency between 2 Hz and 5 Hz and a duty cycle of 50%, active if and only if the LVS is active and the voltage across DC-link capacitors exceeds half the nominal TS voltage 2. The TSAL itself must have a green light, continuously on, active if and only if the LVS is active and ALL of the following conditions are true: ● All AIRs are opened. ● The pre-charge relay is opened. ● The voltage at the vehicle side of the AIRs inside the TSAC does not exceed 60 VDC or 50 VAC RMS. This schematic will include only the Green Light logic. We have to take proper care of High voltage and Low voltage isolation in this schematic because it will have to be implemented on the PCB as well.

    vsdave1616

    39 Comments

    1 Star

  • Arduino Uno R3 Shield Template

    Arduino Uno R3 Shield Template

    Template for Arduino Uno R3 Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Uno R3 itself along with the board outline on the silkscreen. #Arduino #Uno #Shield #Template #project-template #project

    w4rr10r

    37 Comments

    1 Star

  • Arduino Uno R3 Shield for PureData VER1.3

    Arduino Uno R3 Shield for PureData VER1.3

    Template for Arduino Uno R3 Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Uno R3 itself along with the board outline on the silkscreen. #Arduino #Uno #Shield #Template #project-template #project

    soudruhromancz

    34 Comments

    1 Star

  • Arduino Uno R3 Relay Shield

    Arduino Uno R3 Relay Shield

    Template for Arduino Uno R3 Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Uno R3 itself along with the board outline on the silkscreen. #Arduino #Uno #Shield #Template #project-template #project

    corynrobinson

    33 Comments

    1 Star

  • Coil Winder Circuit Board Design

    Coil Winder Circuit Board Design

    This project included the schematic and PCB layout of a coil winding machine circuit board. It uses Arduino Nano microcontroller, to count the number of turns and it can be used to replace manual coil winding process.

    habentek

    24 Comments

    1 Star

  • Thermocouple Amplifier AD8495

    Thermocouple Amplifier AD8495

    The AD8495 K-type thermocouple amplifier from Analog Devices is so easy to use, we documented the whole thing on the back of the tiny PCB. Power the board with 3-18VDC and measure the output voltage on the OUT pin. You can easily convert the voltage to temperature with the following equation: Temperature = (Vout - 1.25) / 0.005 V. So for example, if the voltage is 1.5VDC, the temperature is (1.5 - 1.25) / 0.005 = 50°C with terminal block connections

    adrian95

    &

    12 Comments

    1 Star

  • Pico Macro Keyboard v2

    Pico Macro Keyboard v2

    The Pico Macro Keyboard is a compact and powerful macro pad built using the latest Raspberry Pi Pico 2. Inspired by the Figma Creator Micro, this keyboard is designed for customizable control and enhanced productivity. It features mechanical switches with per-key RGB lighting, along with two rotary encoders for added functionality. With a modular 4-layer PCB and fully customizable keymaps, it seamlessly integrates with any software, making it perfect for designers, gamers, and power users alike.

    flux

    &

    11 Comments

    1 Star

  • Arduino GIGA R1 WiFi Shield Template

    Arduino GIGA R1 WiFi Shield Template

    Template for Arduino GIGA R1 WiFi Shield. On PCB you can find the board outline on the silkscreen. #Shield #Arduino #GIGA #STM32H7 #STM32H747XI #template #project #project-template #ABX00063

    vasy_skral

    vasy_skral

    11 Comments

    1 Star

  • Metal Detector Project

    Metal Detector Project

    This is the circuit my team and I built for my Junior Design Project. I decided to make a PCB for it.

    sonny21

    9 Comments

    1 Star

  • Raspberry Pi 5 Hat Template

    Raspberry Pi 5 Hat Template

    Template for Raspberry Pi 5 Model Shield. Include an official pinout so you will always know Raspberry Pi names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Raspberry Pi itself along with the board outline on the silkscreen. #RaspberryPi #Raspberry #RaspberryPi5 #raspberry #Pi #RPi #Shield #template #project #project-template

    vasy_skral

    vasy_skral

    9 Comments

    1 Star

  • L293B

    L293B

    Diseño PCB L293B

    ecadpcb

    6 Comments

    1 Star

  • GearWorx Helmet Sanitizer Board

    GearWorx Helmet Sanitizer Board

    PCB Board for GearWorx Helmet Sanitizer Vending Machine

    geraldcells

    6 Comments

    1 Star

  • TMF8801-1BM Reference Design

    TMF8801-1BM Reference Design

    This is a reference design of a PCB utilizing the TMF8801-1BM time-of-flight (ToF) sensor from ams-OSRAM. It comprises electronic components such as resistors, capacitors, voltage regulators, and GPIO connectors. The logic signals are managed via Mosfets BSS138 while the Sensor IC is powered & controlled by a 3.3V AP2112K Voltage Regulator. #industrialSensing #referenceDesign #lzer #I2C #osramusa #template #reference-design

    vasyl

    vasyl

    &

    5 Comments

    1 Star

  • [Example] Simulation of Astable Multivibrator Circuit

    [Example] Simulation of Astable Multivibrator Circuit

    A simulated blinking LED circuit using an astable multivibrator a.k.a "flip-flop" as a square wave generator. It also includes PCB layout of the project.

    ashurek

    5 Comments

    1 Star

  • Nodemcu-12E ESP8266 cDtH

    Nodemcu-12E ESP8266 cDtH

    NodeMCU V3 ESP8266 ESP-12E is WiFi development board that helps you to prototype your IoT product with few Lua script lines, or through Arduino IDE. The board is based on ESP8266 ESP-12E variant, unlike other ESP-12E, you won’t need to buy a separate breakout board, usb to serial adapter, or even solder it to a PCB to get started, you will only need a usb cable (Micro USB).

    stanleaf

    3 Comments

    1 Star

  • Arduino Uno R3 Shield Template

    Arduino Uno R3 Shield Template

    Template for Arduino Uno R3 Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Uno R3 itself along with the board outline on the silkscreen. #Arduino #Uno #Shield #Template #project-template #project

    brroo

    &

    1 Comment

    1 Star

  • Arduino Uno R3 Shield Template

    Arduino Uno R3 Shield Template

    Template for Arduino Uno R3 Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Uno R3 itself along with the board outline on the silkscreen. #Arduino #Uno #Shield #Template #project-template #project

    n254y

    &

    1 Comment

    1 Star

  • Black Starship Controller Rev9

    Black Starship Controller Rev9

    The circuit that will bring humans to Mars! Just kidding.. this is a pcb test board.

    bryan

    1 Comment

    1 Star

  • TP4056_Module

    TP4056_Module

    The TP4056 1A Li-ion Lithium Battery Charging Module with Current Protection – Mini USB is a compact device designed to charge individual lithium ion (Li-Ion) cells that lack their own protective circuit, such as 16550s, with a single cell capacity of 3.7V and 1 Ah or higher. This battery charging module employs the TP4056 charger IC and DW01 battery protection IC to provide a charge current of 1A, which will cease upon completion of the charging process. https://robocraze.com/products/tp4056-lithium-battery-charging-board #PCB #TP4056 #battery

    ihscielle

    1 Comment

    1 Star

  • Arduino Uno R3 Shield Template 4wps

    Arduino Uno R3 Shield Template 4wps

    Template for Arduino Uno R3 Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Arduino Uno R3 itself along with the board outline on the silkscreen. #Arduino #Uno #Shield #Template #project-template #project

    joshbuttemer

    1 Comment

    1 Star