Jack Modular Connector 8p8c (RJ45, Ethernet) Vertical Unshielded Cat3 #CommonPartsLibrary #connector #Interconnect #JACK #RJ45 #Cat3 #5556416

1 Port RJ45 Through Hole 10/100/1000 Base-T, AutoMDIX, Power over Ethernet+ (PoE+) #CommonPartsLibrary #Connector #RJ-45 #Ethernet-controller #WE-RJ45 LAN

Ethernet Switch IEEE 802.3, 100 Base-TX PHY MII, RGMII, RMII, SPI Interface 128-TQFP (14x14) #CommonPartsLibrary #IntegratedCircuit #Interface #Controller

Ethernet Controller 10 Base-T PHY SPI Interface 28-SSOP #CommonPartsLibrary #IntegratedCircuit #Interface #Controller #ENC28J60

Mini-LS, commercial temperature, single-port 10/100 Mb/s PHYTER Ethernet physical layer transceiver 1/1 Transceiver Ethernet 40-WQFN (6x6) #CommonPartsLibrary #IntegratedCircuit #interface #Driver #Receiver #Transceiver #DP83848

Ethernet Switch 10/100 Base-T PHY I2C, SPI Interface 128-TQFP-EP (14x14) #commonpartslibrary #integratedcircuit #interfacecontroller

Telecom IC Ethernet Switch 172-QFN #commonpartslibrary #integratedcircuits #telecom #ethernet #switch

Power Over Ethernet Controller 1 Channel 802.3at (PoE+), 802.3af (PoE) 10-TDFN (3x3) #commonpartslibrary #integratedcircuit #powermanagement #poweroverethernet #controllers

ARM® Cortex®-M33 STM32H5 Microcontroller IC 32-Bit 250MHz 2MB (2M x 8) FLASH 144-LQFP (20x20) # STM32H573ZIT6 ## General Description The STM32H573ZIT6 is a high-performance microcontroller from STMicroelectronics based on the Arm Cortex-M33 core. It is designed to deliver advanced processing capability, enhanced security, and extensive peripheral integration for industrial, medical, consumer, communications, and embedded control applications. The device combines powerful computational performance with low-power operation, making it suitable for real-time control, edge computing, human-machine interfaces, industrial automation, IoT gateways, motor control systems, and secure connected devices. Integrated security features, high-speed memory architecture, and comprehensive communication interfaces enable the development of robust and scalable embedded solutions. ## Key Features ### Processing Architecture * Arm Cortex-M33 processor core * TrustZone security architecture * Digital signal processing capabilities * Floating-point computation support * Optimized real-time processing performance ### Memory Resources * Embedded Flash memory * Integrated SRAM architecture * Error correction capability for enhanced reliability * High-speed memory access structure ### Security Features * Secure boot functionality * Hardware cryptographic accelerators * Secure firmware update support * Memory protection mechanisms * Tamper detection capabilities * Trusted execution environment * Secure key management support ### Communication Interfaces * USART and UART communication interfaces * SPI serial communication interfaces * I²C communication interfaces * CAN FD connectivity * USB connectivity support * Ethernet interface capability * SDMMC memory card interface * Flexible external communication options ### Analog Features * High-performance analog-to-digital conversion * Digital-to-analog conversion capability * Analog comparators * Precision signal acquisition support ### Timer and Control Functions * Advanced control timers * General-purpose timers * PWM generation capability * Encoder interface support * Motor-control functionality * Real-time clock integration ### Power Characteristics * Low-power operating modes * Dynamic power optimization * Battery-powered application support * Efficient performance-to-power ratio ### Package Characteristics * LQFP package construction * Surface-mount technology compatibility * Industrial-grade mechanical design * Suitable for automated assembly processes ### Application Areas * Industrial Automation Systems * Motor Control Equipment * Human-Machine Interfaces * Smart Energy Systems * Medical Electronics * IoT Gateways * Secure Embedded Devices * Industrial Networking Equipment * Building Automation Systems * Consumer Electronics * Data Acquisition Systems * Edge Computing Applications ### Compliance * RoHS Compliant * Lead-Free Compatible * Industrial and Commercial Application Support ## Manufacturer STMicroelectronics ## Product Family STM32H5 Series High-Performance Microcontrollers #STM32H573ZIT6 #STM32H5 #STMicroelectronics #CortexM33 #Microcontroller #EmbeddedSystems #IndustrialAutomation #SecureMCU #IoT #EdgeComputing #MotorControl #EmbeddedDesign #ElectronicsEngineering #FirmwareDevelopment #IndustrialElectronics

1/1 Transceiver Full, Half Ethernet 36-HVQFN (6x6) #commonpartslibrary #integratedcircuit #transceiver

USB Bridge, USB to Ethernet USB 3.1 Ethernet Interface 64-VQFN (9x9) #CommonPartsLibrary #IntegratedCircuit #Interface #Controller #LAN7801

4/4 Transceiver Full MII, RMII 32-VQFN (5x5) ## Engineering Specification ## General Description The **LAN8770M-I/PRA** is a Microchip Technology single-port **100BASE-T1 Ethernet physical layer transceiver** designed for automotive, industrial, and embedded networking applications. It provides Ethernet communication over a single balanced twisted pair and is suitable for compact systems requiring reliable network connectivity, low-power operation, and standard MAC interface support. The device is commonly used in automotive electronic control units, infotainment systems, telematics modules, sensor nodes, industrial control systems, and embedded Ethernet hardware. ## Device Identification Manufacturer Part Number: **LAN8770M-I/PRA** Manufacturer: **Microchip Technology** Product Family: **LAN8770** Device Category: **Integrated Circuit** Device Type: **Ethernet PHY Transceiver** Ethernet Standard: **100BASE-T1** Interface Type: **MII and RMII** Mounting Type: **Surface Mount** Package Type: **VQFN** ## Functional Description The device functions as an Ethernet physical layer transceiver that connects a host controller or microcontroller MAC interface to a single-pair Ethernet physical medium. It handles the analog and digital PHY functions required for 100BASE-T1 communication, allowing embedded systems to transmit and receive Ethernet data over a single twisted pair cable. ## Network and Interface Description The **LAN8770M-I/PRA** supports 100 Mb/s single-pair Ethernet communication and provides MII and RMII host interface options. This allows integration with microcontrollers, processors, gateways, and network controllers that support standard Ethernet MAC interfaces. The device is intended for applications where compact Ethernet connectivity and reduced cabling complexity are required. ## Electrical Description The device is designed for low-voltage operation and supports multiple supply domains according to the manufacturer’s recommended operating conditions. Proper power sequencing, decoupling, reset handling, clocking, and reference layout should be implemented to maintain stable PHY operation and signal integrity. ## Package and Mechanical Description The component is supplied in a compact surface-mount **VQFN package**, suitable for dense printed circuit board assemblies. The package supports automated assembly and is appropriate for space-constrained automotive and industrial electronic designs. ## Control and Diagnostic Description The PHY supports management and configuration through standard control interfaces used in Ethernet designs. It provides status monitoring and configuration capability for link management, operating mode selection, and system-level diagnostics. These features allow the host controller to configure and monitor Ethernet link behavior during operation. ## Automotive and Industrial Suitability The **LAN8770M-I/PRA** is suitable for embedded systems requiring robust single-pair Ethernet communication. It is applicable to automotive networking, telematics, infotainment, advanced driver assistance systems, industrial Ethernet nodes, building automation, control modules, and other connected embedded platforms. ## Mounting and Assembly Description The component is intended for surface-mount PCB assembly using standard reflow soldering processes. PCB layout should follow Microchip’s hardware design guidance, including proper power supply decoupling, controlled impedance routing, short signal paths, grounding, and separation of sensitive analog and digital sections where applicable. ## Design Considerations The design should account for Ethernet signal integrity, single-pair cable interface requirements, common-mode noise control, EMC performance, supply filtering, oscillator or clock source requirements, reset timing, thermal performance, and package solderability. The device should not be operated beyond the manufacturer’s specified electrical, thermal, or mechanical limits. ## Application Suitability The device is suitable for automotive Ethernet nodes, electronic control units, telematics modules, infotainment systems, sensor interfaces, industrial controllers, embedded gateways, connected equipment, and compact network-enabled hardware requiring 100BASE-T1 Ethernet PHY functionality. ## Hashtags #commonpartslibrary #integratedcircuit #ethernetphy #microchip #microchiptechnology #lan8770 #lan8770mipra #singlepairethernet #100baset1 #automotiveethernet #ethernettransceiver #phytransceiver #embeddednetworking #mii #rmii #vqfnpackage #smdcomponent #surfacemount #automotiveelectronics #industrialethernet #telematics #infotainment #embeddedhardware #pcbdesign #hardwaredesign #electronicscomponents #electronicparts #componentlibrary #engineeringparts #electronicsengineering

Jack Modular Connector 8p8c (RJ45, Ethernet) 90° Angle (Right) Shielded, EMI Finger Cat3 #CommonPartsLibrary #Connector #Jacks #RJ45

Ethernet Switch IEEE 802.3, 10 Base-T PHY Serial, SPI Interface 48-LFCSP (7x7) #commonpartslibrary #integratedcircuit #ethernet

Jack Modular Connector 8p8c (RJ45, Ethernet) Vertical Unshielded Cat3 #commonpartslibrary #connector #modularjack #8P8C #RJ45

1 Port RJ45 Through Hole 10/100 Base-T, AutoMDIX, Power over Ethernet+ (PoE+) #CommonPartsLibrary #Connector #Ethernet Connectors #WE-RJ45 LAN

MIPS MCU, 80MHz, 512KB Flash, 12KB Boot Flash, 128KB RAM, 2.3-3.6V, USB, CAN, Ethernet, TQFP-100 #Microcontroller #commonpartslibrary

Ethernet ICs W55RP20 microcontroller, Dual ARM Cortex-M0+ a. 133MHz, 2MByte Flash memory on-chip, 264kB on-chip SRAM in six independent banks, DMA controller W55RP20 is a highly integrated System-in-Package (SiP) from WIZnet that combines the popular RP2040 dual-core microcontroller with a W5500 hardware TCP/IP Ethernet controller. Designed for IoT, industrial automation, and embedded networking applications, the W55RP20 delivers reliable Ethernet connectivity, low power consumption, and high-performance processing in a compact package. It simplifies Ethernet-enabled designs by integrating the MCU, network stack, flash memory, and Ethernet functionality into a single device. Key Features Dual-core ARM Cortex-M0+ processor running up to 133 MHz Integrated hardwired TCP/IP stack for reliable Ethernet communication 2 MB on-chip Flash memory 264 KB SRAM in six independent memory banks Built-in 10BASE-T / 100BASE-TX Ethernet MAC and PHY Supports TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE protocols 23 GPIO pins, including 4 analog-capable inputs 2× UART, 2× SPI, and 2× I²C interfaces 16 PWM channels and 8 Programmable I/O (PIO) state machines USB 1.1 Host/Device controller with integrated PHY 12-channel DMA controller for efficient data transfer Operating voltage range of 1.8 V to 3.3 V Industrial temperature support up to -40°C to +85°C Compact 68-QFN package for space-constrained designs #W55RP20 #WIZnet #RP2040 #EthernetMCU #IoT #EmbeddedSystems #IndustrialAutomation #TCPIP #EthernetController #Microcontroller #HardwareTCPIP #Networking #EmbeddedDesign #SmartDevices #IoTDevelopment

1/1 Transceiver Half Ethernet 32-VQFN (5x5) #CommonPartsLibrary #IntegratedCircuit #Interface #Driver #Receiver #Transceiver

MIPS32® M-Class PIC® 32MZ Microcontroller IC 32-Bit 200MHz 2MB (2M x 8) FLASH 100-TQFP (12x12) The PIC32MZ2048EFM100-I/PT is built around a MIPS32® M-Class core operating at up to 200 MHz, delivering high computational performance suitable for real-time control, signal processing, and communication-intensive systems. It integrates large on-chip memory, multiple communication interfaces, and rich peripheral support in a compact package. Key Features Core Architecture: 32-bit MIPS32® M-Class CPU Clock Speed: Up to 200 MHz Program Memory: 2 MB Flash RAM: 512 KB Package: 100-pin TQFP (12×12 mm), surface-mount Operating Voltage: 2.1 V to 3.6 V I/O Pins: Up to 78 programmable I/O Integrated Peripherals & Interfaces Communication Interfaces: CAN, Ethernet, USB OTG I²C, SPI, SQI, UART/USART Parallel Master Port (PMP) Analog Features: 40-channel, 12-bit ADC System Peripherals: DMA controller PWM modules Watchdog timer (WDT) Brown-out reset and power-on reset Advanced Features: Floating Point Unit (FPU) for fast math operations Hardware crypto engine (AES, SHA, etc., depending on variant) High-speed USB and Ethernet connectivity #CommonPartsLibrary #IntegratedCircuit #Microcontroller #PIC® 32MZ

IC Ethernet Controller 10/100 Base-T/TX PHY SPI Interface 80-LQFP (10x10) #CommonPartsLibrary #InterfaceController #IntegratedCircuit

2 Line Common Mode Choke Surface Mount 100mA DCR 3Ohm (Typ) , -55C ~ 125C The ECMF2-40A100N6 and ECMF4-40A100N10 are highly integrated common mode filters designed to suppress EMI/RFI common mode noise on high speed differential serial buses like HDMI 2.1, HDMI 2.0, HDMI1.4, USB4, USB 3.2 Gen 2, USB 2.0, ethernet, MIPI, Display Port and other high speed serial interfaces. They have a very large differential bandwidth to comply with these standards and can also protect and filter one or two differential lanes. 10.7 GHz differential bandwidth to comply with HDMI 2.1, HDMI 2.0, HDMI 1.4, USB4, USB 3.2 Gen2, USB 2.0, MIPI, Display port 2.0, etc. • High common mode attenuation on WLAN frequencies: – -15 dB at 2.4 GHz – -21 dB at 5.0 GHz – -17 dB at 6.0 GHz • Low serial resistance: 3.0 Ω • Very low PCB space consumption • Thin package: 0.5 mm max. • High reduction of parasitic elements through integration • Lead free and RoHS package • Exceeds IEC 61000-4-2 level 4 standard: – Contact discharge: ◦ ±9 kV (contact discharge, ECMF2-40A100N6) ◦ ±10 kV (contact discharge, ECMF4-40A100N10) – Air discharge: ◦ ±20 kV (air discharge, ECMF2-40A100N6) ◦ ±25 kV (air discharge, ECMF4-40A100N10)

Ethernet Controller 10/100 Base-T PHY SPI, Parallel Interface (10x10) IC W/SPI 44-TQFP #CommonPartsLibrary #InterfaceController #IntegratedCircuit #ENC424J600

Power Over Ethernet Controller 5 Channel 802.3cg (PoE) 48-QFN (7x7) #commonpartsLibrary #integratedcircuit #powermanagement #poe

Power Over Ethernet Controller 1 Channel 802.3at (PoE+), 802.3af (PoE) 14-TSSOP #CommonPartsLibrary #IntegratedCircuit #PowerManagement #PoE