10A MPPT Solar Charge Controller with dual USB ports using Low-power 32bit ARMCortex-M0+ MCU (STM32L072). Expandable via Olimex Universal Extension Connector (UEXT) featuring I2C

10A MPPT Solar Charge Controller with dual USB ports using Low-power 32bit ARMCortex-M0+ MCU (STM32L072). Expandable via Olimex Universal Extension Connector (UEXT) featuring I2C

Ultra Low-Power Energy Harvester based on BQ25504 tuned for LiFePO4 battery (VBAT_OV = 3.6V) with terminal block connectors #template #solar

Seeed Studio XIAO ESP32C6 is powered by the highly-integrated ESP32-C6 SoC, built on two 32-bit RISC-V processors, with a high-performance (HP) processor with running up to 160 MHz, and a low-power (LP) 32-bit RISC-V processor, which can be clocked up to 20 MHz. There are 512KB SRAM and 4 MB Flash on the chip, allowing for more programming space, and binging more possibilities to the IoT control scenarios.

Low-Power, Quad-Operational Amplifiers, DIP-14/SOIC-14/SSOP-14

Bankcard size(85x55mm) low-power solar harvester development board on STM8L051 MCU #template #project #STM8 #solar #MPPT

Bankcard size(85x55mm) low-power solar harvester development board on STM8L051 MCU #template #project #STM8 #solar #MPPT

Bankcard size(85x55mm) low-power solar harvester development board on STM8L051 MCU #template #project #STM8 #solar #MPPT

Solar-powered autonomous development board that allows you to grow your project from a small seed to a big, beautiful flower. AAA(10440) LiFePO4 battery as energy storage. BQ25504 Ultra Low-Power Energy Harvester

Low-Power, Quad-Operational Amplifiers, DIP-14/SOIC-14/SSOP-14

Bankcard size(85x55mm) low-power solar harvester development board on STM8L051 MCU #template #project #STM8 #solar #MPPT

Low-Power, Quad-Operational Amplifiers, DIP-14/SOIC-14/SSOP-14

STM32L4 Discovery kit IoT node, low-power wireless, BLE, NFC, SubGHz, Wi-Fi

This is an Energy Meter project leveraging an ATTiny85 microcontroller (U1) to sense current through an ACS712 module (U2). It displays the data in real-time on an OLED display (OLED1) and interacts with three buttons (NEXT, MENU, OK). This compact energy meter is suitable for edge computing and low-power Internet of Things (IoT) applications #project #keypad #arduino #attiny85 #ISP #referenceDesign #edge-computing #edgeComputing #microchip #template #reference-design

Solar-powered autonomous development board that allows you to grow your project from a small seed to a big, beautiful flower. AAA(10440) LiFePO4 battery as energy storage. BQ25504 Ultra Low-Power Energy Harvester

This is an Energy Meter project leveraging an ATTiny85 microcontroller (U1) to sense current through an ACS712 module (U2). It displays the data in real-time on an OLED display (OLED1) and interacts with three buttons (NEXT, MENU, OK). This compact energy meter is suitable for edge computing and low-power Internet of Things (IoT) applications #project #keypad #arduino #attiny85 #ISP #referenceDesign #edge-computing #edgeComputing #microchip #template #reference-design

Solar-powered autonomous development board that allows you to grow your project from a small seed to a big, beautiful flower. AAA(10440) LiFePO4 battery as energy storage. BQ25504 Ultra Low-Power Energy Harvester

Low-power consumer environmental sensor node powered from USB-C 5 V. Includes USB-C sink power entry with reverse polarity, OVP, UVLO, and OCP protection for 0.5 A to 3 A sources, 3.3 V regulation, an ultra-low-power Wi-Fi plus BLE MCU, and a digital temperature/humidity sensor connected over I2C. Intended as a schematic foundation for reliable PCB layout and manufacturing.

Low-power ESP32 audio/radio device with SA828 walkie-talkie module, MAX9814 microphone, PAM8403-driven GD14 bone-conduction output, and single-cell Li-ion charging, power-path, 3.3 V regulation, and battery monitoring.

Low-power USB-C 5V environmental sensor node with robust input protection, ESP32 Wi-Fi/BLE connectivity, digital temperature/humidity sensing, Bluetooth peripheral syncing, and EEG/PPG sensor interfaces for prototype biosignal acquisition.

This tiny board is an easy way to use Toshiba’s TB6612FNG dual motor driver, which can independently control two bidirectional DC motors or one bipolar stepper motor. A recommended motor voltage of 4.5 V to 13.5 V and peak current output of 3 A per channel (1 A continuous) make this a great motor driver for low-power motors. #Module #Motor-Driver #TB6612FNG

Architectural Lavender Translation Collar – ESP32‑S3 Wi‑Fi + LoRa, USB‑C, Li‑ion, low‑power design Overview Experience a cutting-edge IoT solution with this low‑power board built around the ESP32‑S3‑MINI‑1‑N8. Designed for seamless Wi‑Fi (2.4 GHz), BLE, and LoRa (868 MHz) connectivity, this board integrates ENS161 and ENS210 sensors over I2C alongside an RFM95W‑868 LoRa radio on SPI. It is powered via a 3.7 V Li‑ion cell with USB‑C charging up to 500 mA, complete with full battery protection, a robust 3.3 V rail tailored for Wi‑Fi burst currents, and per‑peripheral power gating to enhance energy efficiency. Core Features • MCU: ESP32‑S3‑MINI‑1‑N8 equipped with an onboard PCB antenna for 2.4 GHz Wi‑Fi/BLE, ensuring optimal wireless performance. • Sensors: Integrated ENS161 and ENS210 sensors utilize a shared I2C bus with controllable 4.7 kΩ pull‑ups for streamlined communication. • LoRa Radio: The RFM95W‑868 module, connected via SPI, enables long‑range communication at 868 MHz. Power & USB‑C Connectivity • Battery: A reliable 3.7 V 1200 mAh Li‑ion battery connected via a right‑angle JST‑PH 2‑pin connector features built‑in battery protection. • Charging: The USB‑C receptacle, with CC resistors and TVS protection on D+/D− along with series resistors, supports fast, safe charging with a current limit of 500 mA. • Regulation: A dedicated 3.3 V regulator capable of handling Wi‑Fi burst currents coupled with bulk and high‑frequency decoupling ensures stable operation, supported by status LEDs indicating power and charge states. Low‑Power Control • Peripheral Management: Load switches allow selective power‑gating of the ENS161, ENS210, and RFM95W modules, controlled directly by ESP32‑S3 GPIOs. • Energy Efficiency: Controllable I2C pull‑ups minimize idle current, vital for prolonged battery life in IoT applications. RF and Antenna Integration • 2.4 GHz: Utilizes the integrated PCB antenna on the ESP32‑S3 with proper ground/metal keep‑out zones for optimal signal integrity. • 868 MHz: Features a controlled‑impedance feed from the RFM95W to a PI matching network (C‑L‑C pads) with flexible antenna options—selectable via SMA connector, chip antenna, or PCB trace—and includes RF ESD protection. Connectivity & Debug Features • USB‑C Interface: Provides secure data connectivity with integrated safeguards and proper terminations. • Debugging: A comprehensive programming/debug header exposes EN, BOOT, and UART lines, with test points on key rails and buses (3V3, VBAT, SCK, MOSI, MISO, SDA, SCL, RESET/EN, GND) to simplify development and troubleshooting. Design Verification • Rigorous ERC/DRC and decoupling checks ensure adherence to component ratings and optimal signal routing. • Maintain RF keep‑outs and impedance‑controlled traces for both 2.4 GHz and 868 MHz paths, securing reliable performance even during high‑intensity operations. #IoT #ESP32S3 #LoRa #LowPowerDesign #USB-C #WirelessConnectivity #BatteryPowered #RFDesign

Low-Power USB-C Temperature & Humidity Sensor Node with Wi-Fi and BLE

Low-Power ESP32 USB-C Environmental Sensor Node with Integrated Power Protection

Low-Power USB-C (5 V) Environmental Sensor Node with 18650 Li-Ion Power-Path, Robust Protection (Reverse Polarity, OVP, UVLO, OCP to 3 A), Dual-Radio ESP32-S3 MCU, I²C VOC/Temp/Humidity/Pressure/Lux Sensors, and 2-/4-Pin JST-XH Expansion Pads for Battery and Sensors #USB-C #LiIon #ESP32 #I2C #PowerProtection #EnvironmentalSensor

Low-Power USB-C PD Selectable Output with Push-Button Control and LED Status

Compact Low-Power Wrist Altimeter (STM32G070 + BMP580 + 1.77" SPI TFT) – Completed 30 × 20 mm, 2-Layer, 1.6 mm FR-4 PCB Layout Ready for Pre-Manufacturing Review

Low-Power USB‑C Environmental Sensor Node with Robust Power Protection and Dual-Radio Connectivity

Low-Power Dual-Radio Environmental Sensor Node with Robust USB-C Protection

96-Channel, 12-Bit, Low-Power, Serial-Input, High-Voltage Output DAC with Conversion Trigger

Bankcard size(85x55mm) low-power solar harvester development board on STM8L051 MCU #template #project #STM8 #solar #MPPT

Seeed Studio XIAO ESP32C6 is powered by the highly-integrated ESP32-C6 SoC, built on two 32-bit RISC-V processors, with a high-performance (HP) processor with running up to 160 MHz, and a low-power (LP) 32-bit RISC-V processor, which can be clocked up to 20 MHz. There are 512KB SRAM and 4 MB Flash on the chip, allowing for more programming space, and binging more possibilities to the IoT control scenarios.

Bankcard size(85x55mm) low-power solar harvester development board on STM8L051 MCU #template #project #STM8 #solar #MPPT

Bankcard size(85x55mm) low-power solar harvester development board on STM8L051 MCU #template #project #STM8 #solar #MPPT

Bankcard size(85x55mm) low-power solar harvester development board on STM8L051 MCU #template #project #STM8 #solar #MPPT

This is an Energy Meter project leveraging an ATTiny85 microcontroller (U1) to sense current through an ACS712 module (U2). It displays the data in real-time on an OLED display (OLED1) and interacts with three buttons (NEXT, MENU, OK). This compact energy meter is suitable for edge computing and low-power Internet of Things (IoT) applications #project #keypad #arduino #attiny85 #ISP #referenceDesign #edge-computing #edgeComputing #microchip #template #reference-design

This is the project template for the Raspberry Pi Pico 2, the latest addition and update to Pi Pico line up. Raspberry pi pico 2 is equipped with the RP2350, a cutting-edge, high-performance microcontroller designed with enhanced security and versatility in mind. Every element of its design has been upgraded, from the advanced CPU cores to the innovative PIO (Programmable I/O) interfacing subsystem. The Raspberry Pi Foundation has integrated a robust security architecture centered around Arm TrustZone for Cortex-M, ensuring data protection and integrity. Additionally, new low-power states and expanded package options broaden the range of applications, making the Pico 2 an ideal choice for diverse, power-sensitive projects. To learn more about what's the key differences between the original Pi Pico and the new Pi Pico 2, read our blog https://www.flux.ai/p/blog/whats-new-in-the-raspberry-pi-pico-2-a-showdown-with-the-original-raspberry-pi-pico #project-template #template #raspberry #pi #pico2 #newpico

Bankcard size(85x55mm) low-power solar harvester development board on STM8L051 MCU #template #project #STM8 #solar #MPPT

Low-Power, Quad-Operational Amplifiers, DIP-14/SOIC-14/SSOP-14

Low-Power, Quad-Operational Amplifiers, DIP-14/SOIC-14/SSOP-14

Low-Power, Quad-Operational Amplifiers, DIP-14/SOIC-14/SSOP-14

Bankcard size(85x55mm) low-power solar harvester development board on STM8L051 MCU #template #project #STM8 #solar #MPPT

Bankcard size(85x55mm) low-power solar harvester development board on STM8L051 MCU #template #project #STM8 #solar #MPPT

Low-Power, Quad-Operational Amplifiers, DIP-14/SOIC-14/SSOP-14

Bankcard size(85x55mm) low-power solar harvester development board on STM8L051 MCU #template #project #STM8 #solar #MPPT

The OPAx863 series from Texas Instruments includes the OPA863, OPA2863, and OPA4863, which are low-power, rail-to-rail input/output, voltage-feedback operational amplifiers designed for high-performance applications. These amplifiers feature a unity-gain bandwidth of 110 MHz, a gain-bandwidth product of 50 MHz, and a low quiescent current of 700 µA per channel. The devices operate across a wide supply voltage range of 2.7 V to 12.6 V, making them suitable for both portable and battery-powered systems. With a slew rate of 105 V/µs, 5.9 nV/√Hz input voltage noise, and exceptional harmonic distortion performance (-129 dBc HD2, -138 dBc HD3 at 20 kHz for 2 Vpp output), the OPAx863 is adept for driving SAR and ΔΣ ADCs, acting as ADC reference buffers, low-side current sensing, photodiode TIA interfaces, and other high-precision tasks. Additional features include overload power limiting, output short-circuit protection, and a power-down mode with minimal quiescent current, making the OPAx863 series a versatile and robust choice for applications requiring low power and high-precision analog performance. The series includes single, dual, and quad-channel configurations available in various surface-mount packages to fit different design requirements.

The Texas Instruments OPA863, OPA2863, and OPA4863 are low-power, voltage-feedback operational amplifiers designed to offer a unity-gain stable, rail-to-rail input and output with a 110-MHz bandwidth. These amplifiers are optimized for a broad power supply range from 2.7 V to 12.6 V, catering to a variety of portable and battery-powered applications. Key features include a quiescent current of 700-uA/ch (typical), a gain-bandwidth product of 50 MHZ, input voltage noise of 5.9-nV/VHz, and a slew rate of 105-V/us. The series also highlights specialized versions including the OPAx863A for high precision requirements, and all models integrate features like overload power limit and output short-circuit protection for ruggedized environments. The devices’ applicability spans across multiple domains including low-power SAR and ΔΣ ADC drivers, ADC reference buffers, photodiode transimpedance amplifiers, and more. The comprehensive array of packages available (including SOT-23, VSSOP, WQFN, and TSSOP options) ensures flexibility in hardware design, making these operational amplifiers from Texas Instruments suitable for high-performance, space-conscious, and power-sensitive electronic circuits.

Solar-powered autonomous development board that allows you to grow your project from a small seed to a big, beautiful flower. AAA(10440) LiFePO4 battery as energy storage. BQ25504 Ultra Low-Power Energy Harvester

GPS01-TD module is a quad-mode Mini GPS module that supports BDS/GPS/GLONASS/Galileo/QZSS/SBAS and fully supports BeiDou B3, which can provide users with high quality, strong anti-jamming and low-power positioning and navigation solutions.

The Seeed Studio XIAO RP2040 is as small as the Seeed Studio XIAO SAMD21 but it's more powerful. On one hand, it carries the powerful Dual-core RP2040 processor that can flexible clock running up to 133 MHz which is a low-power microcontrollers. On the Seeed Studio XIAO RP2040 there is also 264KB of SRAM, and 2MB of on-board Flash memory which can provide more program to save and run. On the other hand, this little board has good performance in processing but needs less power. All in all, it is designed in a tiny size as small as a thumb(20x17.5mm) and can be used for wearable devices and small projects. #RP2040 #PICO #XIAO #SeeedStudio