This is an Energy Meter project leveraging an ATTiny85 microcontroller (U1) to sense current through an ACS712 module (U2). It displays the data in real-time on an OLED display (OLED1) and interacts with three buttons (NEXT, MENU, OK). This compact energy meter is suitable for edge computing and low-power Internet of Things (IoT) applications #project #keypad #arduino #attiny85 #ISP #referenceDesign #edge-computing #edgeComputing #microchip #template #reference-design

Bidirectional DC-DC converter management system PCB for energy storage applications. The design targets bidirectional charge and discharge control, dynamic power regulation, energy optimization, and overload protection for storage systems. It integrates a control section with MCU-class supervision, 16-bit ADC measurement, PWM-based power-stage control, and industrial CAN/RS485 communication, while planning practical PCB partitioning for high-current power paths, mixed-signal control, and protected interfaces. Target conversion efficiency is 98% or higher, with CMOS-oriented high-integration design intent adapted into a manufacturable mixed-signal PCB implementation.

Single-phase student energy meter using ATM90E26 metering IC, STM32F103 MCU, OLED display, USB-UART communication, transformer voltage sensing, and SCT013 current sensing. Designed for a 2-layer PCB within 150 mm x 150 mm and a BOM target below 50 EUR.

This is an Energy Meter project leveraging an ATTiny85 microcontroller (U1) to sense current through an ACS712 module (U2). It displays the data in real-time on an OLED display (OLED1) and interacts with three buttons (NEXT, MENU, OK). This compact energy meter is suitable for edge computing and low-power Internet of Things (IoT) applications #project #keypad #arduino #attiny85 #ISP #referenceDesign #edge-computing #edgeComputing #microchip #template #reference-design

This breakout board uses the LTC3588 Piezoelectric Energy Harvester from Linear Technologies. This board can be used not only for harvesting piezoelectric energy, but solar energy as well. There is a bridge rectified input for piezo elements (PZ1 and PZ2) and a direct input (VIN) for DC sources. Both are clamped to 20V. In addition, the board can simply be used as a standalone nanopower buck regulator.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

AvocAudio is a compact tinyML community board designed for extensive audio data collection for various tinyML applications. It leverages the Raspberry Pi RP2040 and integrates a LoRa-E5 LoRaWAN Transceiver Module for connectivity. Equipped with an SD card slot for local data storage, the board ensures efficient data collection. The board operates on solar power or a lithium-ion battery, ensuring flexible and efficient energy use. #raspberryPi #rp2040 #lorawan #iot #solar

Brave is a versatile and efficient power board that can provide 12v, 5v and 3.3v outputs for various applications from 4V to 5V Input. It can be powered by battery or solar panel, and the battery can be recharged by solar energy. It can also be powered by a USB port if needed. This board is ideal for IoT projects that require reliable and stable power supply in different environments. USB INPUT: 5V Solar INPUT: 4V - 6V Battery Input: 3.6V - 4.2V OUTPUTs: 12V, 5V, and 3.3V #IoT #power #management #usb

Brave is a versatile and efficient power board that can provide 12v, 5v and 3.3v outputs for various applications. It can be powered by battery or solar panel, and the battery can be recharged by solar energy. It can also be powered by a USB port if needed. This board is ideal for IoT projects that require reliable and stable power supply in different environments. #IoT #power #management #usb

The LTC3109 from Linear Technology is a highly integrated DC/DC converter specifically designed for energy harvesting applications. It can operate from ultra-low input voltages as low as 30mV, utilizing a unique, proprietary auto-polarity architecture to function regardless of input polarity. The component is ideal for harvesting energy from thermoelectric generators (TEGs) and thermopiles, efficiently converting this energy to power remote sensors, wireless transmitters, and low-power devices. Key features include selectable output voltages of 2.35V, 3.3V, 4.1V, or 5V, a 2.2V low-dropout (LDO) regulator, a logic-controlled output, and an energy storage system to maintain operation during power interruptions. The LTC3109 is encapsulated in a small, 20-lead (4mm × 4mm) QFN or SSOP package, making it compact and suitable for space-constrained applications in HVAC systems, building automation, and industrial wireless sensing. Additionally, the power good indicator and the ability to use compact step-up transformers further enhance its suitability for low power, energy-harvesting systems.

Have you ever wanted to wake up to one of the most energizing scents? Have you ever wanted that cup of energy in your hands before you even slide out of your covers? Well want no further! Introducing the Coffee Waker; The knight of your nightstand, a coffee maker alarm clock with one soul purpose, to quickly and scrumptiously wake you up. This is the Coffee Waker Main board. It contains an ESP32-S3, 16 bit Load Cell ADC, 16 bit MP3 DAC, 120V heater cartridge relay, and 12C wakeup light convector.

Brave is a versatile and efficient power board that can provide 12v, 5v and 3.3v outputs for various applications. It can be powered by battery or solar panel, and the battery can be recharged by solar energy. It can also be powered by a USB port if needed. This board is ideal for IoT projects that require reliable and stable power supply in different environments. #IoT #power #management #usb

This bee hotel version is an intermediary version that implements some featuresets. The main feature that we are leaving out is Matter support over Zigbee (for a wider range in the backyard). In this version, we are implmenting: -Legacy WiFi/BT connectivity. -Camera with flash capability -Solar Charging -Energy Storage -Humidity and Temp Sensor

A class of rotary electrical motors that converts direct current (DC) electrical energy into mechanical energy.

Change History from V1: -Font Bigger for SMD Footprint and IC designators -Confirmed that V1 worked for LED energy harvesting and NFC write/read Forked an amazing PCB business card from Mark Wu and added a SMD footprint and silkscreen art.

Solar-powered autonomous development board that allows you to grow your project from a small seed to a big, beautiful flower. AAA(10440) LiFePO4 battery as energy storage. BQ25504 Ultra Low-Power Energy Harvester

Brave is a versatile and efficient power board that can provide 12v, 5v and 3.3v outputs for various applications. It can be powered by battery or solar panel, and the battery can be recharged by solar energy. It can also be powered by a USB port if needed. This board is ideal for IoT projects that require reliable and stable power supply in different environments. #IoT #power #management #usb

Dual core, Wi-Fi: 2.4 GHz up to 150 Mbits/s,BLE (Bluetooth Low Energy) and legacy Bluetooth, 32 bits, Up to 240 MHz #esp32 #ble #wifi #arm

Brave is a versatile and efficient power board that can provide 12v, 5v and 3.3v outputs for various applications. It can be powered by battery or solar panel, and the battery can be recharged by solar energy. It can also be powered by a USB port if needed. This board is ideal for IoT projects that require reliable and stable power supply in different environments. #IoT #power #management #usb

AvocAudio is a compact tinyML community board designed for extensive audio data collection for various tinyML applications. It leverages the Raspberry Pi RP2040 and integrates a LoRa-E5 LoRaWAN Transceiver Module for connectivity. Equipped with an SD card slot for local data storage, the board ensures efficient data collection. The board operates on solar power or a lithium-ion battery, ensuring flexible and efficient energy use. #audioDevices #raspberryPi #rp2040 #lorawan #iot #solar

Brave is a versatile and efficient power board that can provide 12v, 5v and 3.3v outputs for various applications. It can be powered by battery or solar panel, and the battery can be recharged by solar energy. It can also be powered by a USB port if needed. This board is ideal for IoT projects that require reliable and stable power supply in different environments. #IoT #power #management #usb

Brave is a versatile and efficient power board that can provide 12v, 5v and 3.3v outputs for various applications. It can be powered by battery or solar panel, and the battery can be recharged by solar energy. It can also be powered by a USB port if needed. This board is ideal for IoT projects that require reliable and stable power supply in different environments. #IoT #power #management #usb

The is a playground project based on the AvocAudio board which is a compact tinyML community board designed for extensive audio data collection for various tinyML applications. It leverages the Raspberry Pi RP2040 and integrates a LoRa-E5 LoRaWAN Transceiver Module for connectivity. Equipped with an SD card slot for local data storage, the board ensures efficient data collection. The board operates on solar power or a lithium-ion battery, ensuring flexible and efficient energy use. #raspberryPi #rp2040 #lorawan #iot #solar