Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab #CommonpartLibrary #Battery-Holder #Clip #Contact #S8421-4

I-PEX MHF4 Connector Receptacle, Male Pin 50 Ohms Surface Mount Solder The 20449-001E-03 is an ultra-miniature MHF4 RF coaxial receptacle connector from I-PEX designed for high-frequency wireless applications such as Wi-Fi, Bluetooth, LTE, GNSS, and cellular antenna connections in compact electronic devices. It is a surface-mount RF connector optimized for miniature coaxial cable assemblies and high-density PCB layouts. Key Features Ultra-small MHF4 RF coaxial receptacle Supports frequencies up to 9 GHz Characteristic impedance: 50 Ω Surface-mount (SMT) PCB mounting Snap-on mating mechanism Compact footprint for space-constrained designs Gold-plated center contact for improved conductivity and corrosion resistance Uses: MHF4 compatible RF cables and antenna assemblies High-reliability micro RF interconnect Operating temperature: −40°C to +90°C Rated voltage: 60 V Approximate mating cycle rating: 30 cycles Constructed with: Brass contacts LCP (Liquid Crystal Polymer) dielectric material RoHS compliant Typical Applications Wi-Fi modules LTE/5G modules GNSS/GPS antennas Bluetooth devices IoT devices Embedded wireless systems Compact handheld electronics RF communication modules

20 Position Receptacle Connector 0.100" (2.54mm) Through Hole Tin The SSW-120-01-T-S is a single-row, 20-position female (receptacle) socket strip with a 2.54 mm (0.1") pitch, intended for through-hole PCB mounting. It uses Samtec’s Tiger Buy™ contact system, providing reliable electrical performance and durability for repeated mating cycles. It is commonly used in embedded systems, development boards, and general PCB interconnections, especially where standard 0.1" headers are required. Female header 1x20 2.54mm Key Features Standard 2.54 mm Pitch Industry-standard spacing compatible with most pin headers and prototyping systems 20 Positions, Single Row Ideal for compact signal connections and header interfaces Tiger Buy™ Contact System Provides low insertion force and reliable electrical contact Available in standard or low insertion force variants Through-Hole Mounting Ensures strong mechanical retention and durability on PCBs Tin-Plated Contacts (T option) Cost-effective plating suitable for general-purpose applications High-Speed Capability Supports signals up to ~8 Gbps, depending on application and layout Wide Operating Temperature Range Typically −55 °C to +105 °C, suitable for industrial environments Material Construction Contacts: Phosphor bronze Insulator: High-temperature plastic (e.g., LCP) Versatile Mating Compatibility Mates with common Samtec header series (TSW, MTSW, etc.) and standard 0.025" square posts #CommonPartsLibrary #Connector #SSW-120

Battery Holder (Open) Coin, 20.0mm 1 Cell PC Pin #CommonpartLibrary #Battery-Holder #Clip #Contact #WA-BCPH

33V (Typ) Clamp 2.7A (8/20µs) Ipp Tvs Diode Surface Mount 2-X1SON (1x0.6) The ESD601-Q1 is a bidirectional ESD protection diode. The ESD601-Q1 is offered in the industry standard 0402 (DPY) package, and offers an IEC 61000-4-2 protection level of 15kV. The device can clamp 8/20μs surges with peak pulse currents up to 2.7A in accordance with the IEC 61000-4-5 standard. The low capacitance and low leakage current provide protection against transient events in a variety of systems and applications. This protection is key for many applications, such as smaller form factors and faster data speeds, which are becoming more popular over time. Features • IEC 61000-4-2 ESD Protection: – ±15kV contact discharge – ±15kV air gap discharge • ISO 10605 (330pF, 330Ω) ESD Protection: – ±12kV contact discharge – ±15kV air-gap discharge • IEC 61000-4-5 surge protection: – 2.7A (8/20µs) • I/O capacitance: 0.3pF (typical) • Ultra low leakage current: 1nA (typical) • Low dynamic resistance 0.9Ω (typical) • Industry standard 0402 package 2 Applications • Automotive Antenna ESD Protection • RF Signal ESD Protection • Near Field Communications (NFC) • Automotive SerDes w/Power over Coax • USB Type-C (short-to-Vbus tolerant) #CommonPartsLibrary #Diode #TVS

Connector Header Panel Mount, Through Hole 12 position 0.230" (5.84mm) The 0194280015 is a wire-to-board rectangular header connector from Molex, part of the MX150L series. It is designed for high-reliability power and signal connections, particularly in automotive and industrial environments. This connector is a 12-position, dual-row, vertical (straight) male header that mounts through the PCB and mates with corresponding cable connectors. It features a sealed design (IP67 rated), making it suitable for harsh conditions such as dust, moisture, and vibration. Key Features Connector Type Wire-to-board male header (vertical / straight) Number of Positions 12 contacts (2 rows) Pitch 5.84 mm terminal pitch ~6.0 mm row spacing High Power Capability Up to ~18 A per contact (application dependent) Voltage rating up to 600V AC/DC Sealed / Rugged Design IP67 rated (dust-tight and waterproof) Suitable for harsh environments Mounting Type Panel mount / through-hole PCB soldering Locking Mechanism Locking ramp + polarization (keying) for secure mating Material & Construction Housing: Glass-filled PBT (UL94 V-0 flame rating) Contacts: Copper alloy with tin plating Durability Designed for automotive-grade reliability Typical mating cycles: ~25 cycles Operating Temperature Approximately -40°C to +125°C #CommonPartsLibrary #Connector #MX150L 19428

2 Position Wire to Board Terminal Block Vertical with Board 0.138" (3.50mm) Surface Mount The 1250360000 is a high-quality PCB terminal block manufactured by Weidmüller, designed for secure and reliable wire-to-board connections. It features a robust screw-clamp connection system that ensures strong mechanical retention and excellent electrical conductivity. This component is widely used in industrial control systems, power distribution modules, and automation equipment where dependable field wiring is required. The terminal block is designed for easy installation on printed circuit boards and supports solid or stranded wires. Its durable housing material provides resistance to environmental stress, making it suitable for long-term operation in demanding applications. Key Features Screw clamp connection for secure wire termination Through-hole PCB mounting for strong mechanical stability High current carrying capability مقاust insulating housing with flame-retardant properties واضحة labeling area for easy identification Suitable for industrial and automation applications Electrical Characteristics Rated Voltage: 300 V (typical, verify datasheet) Rated Current: Up to 10–16 A (depending on wire size) Contact Resistance: Low (optimized for power applications) Insulation Resistance: High (>10⁸ Ω typical) Mechanical Characteristics Mounting Type: Through-Hole PCB Connection Type: Screw Clamp Number of Positions: Typically 2–12 positions (variant dependent) Wire Gauge Range: ~24 AWG to 12 AWG (approx.) Pitch: Typically 5.00 mm or 5.08 mm (verify exact variant) Material Information Housing Material: Polyamide (PA), flame-retardant (UL94 V-0) Contact Material: Copper alloy Contact Plating: Tin-plated Environmental Characteristics Operating Temperature Range: -40°C to +105°C (typical) Flammability Rating: UL94 V-0 RoHS Compliant: Yes Applications Industrial control systems Power supply units Automation and PLC systems Signal and power distribution boards Building and factory wiring interfaces Notes Exact electrical ratings and pitch may vary depending on the specific configuration under this series. Always refer to the official Weidmüller datasheet for precise parameters before design integration. #commonpartslibrary #connector #terminalblock

Contact Spring Surface Mount #commonpartslibrary #connector #spring

100 Position Connector Receptacle, Center Strip Contacts Surface Mount Gold It is a 100-pin surface-mount receptacle connector used to connect two PCBs in a stacked configuration. The DF40HC series is known for ultra-fine pitch and high-speed signal capability, making it suitable for modern embedded and communication systems. Connector type: Board-to-board (mezzanine), receptacle Number of contacts: 100 positions (2-row layout) Pitch: 0.4 mm (very fine pitch for high-density routing) Stacking height: 3.0 mm (fixed mated height) Mounting: Surface-mount (SMT) Orientation: Straight Contact plating: Gold (for reliable conductivity and corrosion resistance) Rated current: 0.3 A per contact Rated voltage: 50 V AC/DC Contact resistance: ≤ 90 mΩ Withstanding voltage: 150 V max High-speed capability: up to 20 Gbps, supports interfaces like: USB 3.1 / USB 3.0 PCIe SATA MIPI Connector size: Length: ~22.6 mm Width: ~3.38 mm Height: ~2.9 mm Mating durability: ~30 cycles Operating temperature: -55°C to +85°C #CommonPartsLibrary #Connector #Mezzanine-connector #DF40

Connector Header Through Hole 10 position 0.100" (2.54mm) The TSW-105-07-G-D is part of the Samtec TSW series, which consists of 0.100″ (2.54 mm) pitch PCB header strips. It is a dual-row, 10-position (2×5) male pin header intended for through-hole mounting on printed circuit boards. This connector provides a simple and reliable way to connect PCBs or interface with cables and other connectors (e.g., female sockets or IDC connectors). Key Features Connector Type: Rectangular header (male pin) Mounting Type: Through-hole (THT) Pitch: 2.54 mm (0.100″ standard spacing) Number of Positions: 10 pins Rows: Dual-row (2×5 configuration) Contact Style: 0.025″ (0.635 mm) square posts Orientation: Vertical (straight header) Plating: Gold (indicated by “G”) for reliable contact Electrical & Mechanical Highlights Current Rating: up to ~6.3 A per contact (series typical) Voltage Rating: up to ~400–550 VAC Operating Temperature: approx. -55 °C to +125 °C High durability: supports multiple mating cycles (extended-life design) Typical Applications Microcontroller and development boards Board-to-board connections Prototyping systems (breadboard-compatible headers) Industrial and embedded electronics Cable-to-board interfaces #CommonPartsLibrary #Connector #Header #TSW

8 Position Wire to Board Terminal Block Horizontal with Board 0.200" (5.08mm) Through Hole Body Features: Primary Product Color Green | Product Orientation Vertical | Configuration Features: Stacking Configuration Side Stackable | Number of Rows 1 | Number of Positions 8 | Wire Entry Location Side | Wire Entry Angle 90 | Stacked Levels Without | Contact Features: Contact Current Rating (Max) 13.5 AMP | Contact Base Material Brass | Contact Mating Area Plating Material Tin | Dimensions: Wire Size .05 1.3 MMSQ | Wire Size 30 16 AWG | Electrical Characteristics: Operating Voltage 300 VAC | #commonpartslibrary #connector #terminalblock

20 Position Receptacle Connector 0.100" (2.54mm) Through Hole Tin The SSQ-110-03-T-D is a through-hole dual-row socket strip receptacle connector manufactured by Samtec, designed for board-to-board and pin header mating applications using the industry-standard pitch spacing that has been dominant in through-hole PCB interconnect design for decades. It belongs to Samtec's SSQ series, a family of square-post socket strip connectors that accept standard square-pin headers and are widely used across prototyping, instrumentation, test and measurement, embedded systems, industrial control, and general-purpose PCB stacking applications. As a socket strip of the receptacle gender, the SSQ-110-03-T-D is intended to receive a mating male pin header, creating a reliable and separable board-to-board or wire-to-board connection. The dual-row configuration provides a higher contact density within a given board length than a single-row socket, which is why dual-row socket strips in this pitch class are extensively used in applications such as microcontroller and single-board computer expansion connectors, module-to-baseboard interfaces, and other designs where a significant number of signal, power, or ground connections must be made across a single separable connector interface. The connector features square solder tails for through-hole PCB mounting, with the "-T" suffix in the part number designating the square post tail style, which provides a well-defined mechanical footprint and reliable solder joint formation in wave solder and hand-solder assembly processes. The "-D" suffix indicates the dual-row configuration. Contact material is phosphor bronze, a widely used spring-contact alloy chosen for its combination of good electrical conductivity, excellent spring properties that maintain consistent contact force across many mating cycles, and resistance to stress relaxation over time. The contacts are finished with matte tin plating over nickel underplate, providing a solderable, cost-effective contact surface suitable for the majority of general-purpose signal and low-power applications for which this connector class is typically used. The insulator body is molded from black liquid crystal polymer, a high-performance engineering thermoplastic that offers the high dimensional stability, excellent electrical insulation properties, and high-temperature resistance needed to withstand wave soldering and reflow-adjacent thermal exposure during PCB assembly. The material also carries a UL94 V-0 flammability rating, reflecting its self-extinguishing behavior in the event of an ignition source, which is required or preferred in many end-product regulatory compliance frameworks. The SSQ series is widely used in conjunction with Samtec's TSW series male pin headers as a complementary mating pair, and the connector is compatible with a broad range of standard square-pin headers from other manufacturers that conform to the same pitch and pin geometry, making it a versatile choice for general-purpose through-hole header applications. Spec Sheet Identification Part Number: SSQ-110-03-T-D Series: SSQ Manufacturer: Samtec, Inc. Connector Type / Configuration Type: Socket strip receptacle Gender: Female (receptacle) Row Configuration: Dual row Orientation: Straight, vertical Mounting Method: Through-hole, solder tail Contact & Material Properties Contact Material: Phosphor bronze Contact Finish — Mating Zone: Matte tin over nickel Contact Finish — Post/Tail: Tin Contact Type: Forked socket, square post acceptance Post/Tail Style: Square solder tail Mechanical Specifications Contact Pitch: Standard pitch class, widely used through-hole spacing Profile Height: Standard SSQ series mated height class Insulator Color: Black Insulator Material: Liquid crystal polymer (LCP) Flammability Rating: UL94 V-0 Body Orientation: Straight Electrical Ratings Current Rating Per Contact: Mid-range per-pin current class Voltage Rating: High AC and DC voltage rating class for general-purpose signal use Mating Cycles: Rated for repeated mate/unmate cycles Environmental & Qualification Operating Temperature Range: Extended range, suitable for industrial environments RoHS Compliance: Yes Export Classification: EAR99 Mating Compatibility Mates With: Samtec TSW series male pin headers and compatible standard square-pin headers from other manufacturers Application Note: Suitable for board-to-board stacking, module-to-baseboard interfaces, SBC expansion connectors, and general-purpose through-hole header applications Packaging Supply Format: Bulk packaging #SSQ110 #Samtec #SocketStrip #DualRowConnector #ThroughHoleConnector #PCBReceptacle #PinHeader #BoardToBoard #FemaleSockets #PhosphorBronze #LCP #UL94V0 #EmbeddedSystems #Prototyping #InstrumentationConnector #GeneralPurposeConnector #ConnectorDatasheet #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #RoHSCompliant #PCBDesign #CommonPartsLibrary #Connector #Header #Receptacle #Female-Socket #SSQ

1/1 Transceiver Half RS422, RS485 8-SOIC These devices have robust 3.3-V drivers and receivers in a small package for demanding industrial applications. The bus pins are robust to ESD events with high levels of protection to Human-Body Model and IEC Contact Discharge specifications. Each of these devices combines a differential driver and a differential receiver which operate from a single 3.3-V power supply. The driver differential outputs and the receiver differential inputs are connected internally to form a bus port suitable for half-duplex (two-wire bus) communication. These devices feature a wide common-mode voltage range making the devices suitable for multi-point applications over long cable runs. These devices are characterized from –40°C to 125°C 1• Small-size VSSOP Packages Save Board Space, or SOIC for Drop-in Compatibility • Bus I/O Protection – >±15 kV HBM Protection – >±12 kV IEC 61000-4-2 Contact Discharge – >±4 kV IEC 61000-4-4 Fast Transient Burst • Extended Industrial Temperature Range –40°C to 125°C • Large Receiver Hysteresis (80 mV) for Noise Rejection • Low Unit-Loading Allows Over 200 Connected Nodes • Low Power Consumption – Low Standby Supply Current: < 2 µA – ICC < 1 mA Quiescent During Operation • 5-V Tolerant Logic Inputs Compatible With 3.3-V or 5-V Controllers • Signaling Rate Options Optimized for: 250 kbps, 20 Mbps, 50 Mbps • Glitch Free Power-Up and Power-Down Bus Inputs and Outputs 2 Applications • Factory Automation • Telecommunications Infrastructure • Motion Control #SN65HVD75D #RS485 #RS422 #Transceiver #TexasInstruments #IndustrialCommunication #FactoryAutomation #MotionControl #TelecomInfrastructure #ESDProtection #HalfDuplex #InterfaceIC #EmbeddedSystems #IndustrialElectronics #DataCommunication

67 Position Female Connector M.2 (NGFF) Mini Card Gold 0.020" (0.50mm) Black # Engineering Specification ## Product Name 2199230-4 ## General Description 2199230-4 is a surface mount board-edge connector designed to support standardized M.2 module interfaces, specifically configured for Key E applications used in wireless communication, embedded computing, and high-speed peripheral expansion systems. The component provides a reliable mechanical and electrical interface between a host printed circuit board and a removable or fixed M.2 module. The connector is engineered to accept gold-finger edge contacts from an M.2 module, enabling secure signal transmission for high-speed data communication, power delivery, and control signaling. Its design supports stable mechanical retention, precise alignment, and consistent electrical contact performance under repeated mating cycles. This component is widely used in industrial computing platforms, telecommunications equipment, IoT devices, and embedded system architectures where modular expansion and standardized connectivity are required. It enables flexible system design by allowing interchangeable M.2 modules for wireless communication, storage, and specialized processing functions. The design emphasizes signal integrity, mechanical durability, and compatibility with high-density PCB layouts. It is suitable for applications requiring robust high-frequency performance and reliable long-term mechanical stability. ## Functional Requirements ### Module Interface The connector shall provide a standardized interface for M.2 Key E module insertion and electrical connection. ### Signal Transmission The connector shall support high-speed electrical signal routing between host systems and M.2 modules. ### Mechanical Retention The connector shall securely retain inserted modules under vibration and operational stress conditions. ### System Modularity The connector shall enable modular expansion and replacement of functional M.2 devices within host systems. ## Electrical Requirements ### Contact Performance The connector shall provide stable electrical contact between gold-finger module pads and host PCB terminals. ### Signal Integrity The design shall support high-frequency signal transmission with minimal loss and interference. ### Power Delivery The connector shall support regulated power distribution to installed M.2 modules. ### Low Resistance Path The electrical interface shall maintain low contact resistance for reliable long-term operation. ## Mechanical Requirements ### Board Edge Mounting The connector shall be mounted on a printed circuit board to accept edge-insertion M.2 modules. ### Alignment and Fit The design shall ensure precise alignment between module contacts and connector terminals. ### Durability The connector shall withstand repeated module insertion and removal cycles without performance degradation. ### Structural Stability The assembly shall maintain mechanical integrity under vibration and operational stress conditions. ## Environmental Requirements ### Operating Conditions The connector shall operate reliably in industrial, commercial, and embedded system environments. ### Thermal Performance The device shall maintain mechanical and electrical stability under elevated operating temperatures. ### Storage and Handling The component shall retain structural and functional integrity during storage, transportation, and assembly processes. ## Quality Requirements ### Reliability The connector shall provide consistent electrical and mechanical performance throughout its operational lifetime. ### Verification Mechanical retention, contact resistance, and signal integrity shall be validated through appropriate qualification testing. ### Compliance The product shall conform to applicable standards governing M.2 interface connectors and high-speed board-edge interconnect systems. ## Documentation Requirements Technical documentation shall include footprint layout guidance, mating interface specifications, signal routing recommendations, mechanical keep-out regions, and application guidelines for M.2 system integration. ## Classification Tags #21992304 #M2Connector #M2KeyE #EdgeCardConnector #GoldFingerInterface #HighSpeedConnector #BoardEdgeConnector #WirelessModuleConnector #PCIeInterface #NGFF #EmbeddedSystems #IoTHardware #TelecomHardware #PCBDesign #MechanicalConnector #SignalIntegrity #HighFrequencyDesign #CommonPartsLibrary #ComponentLibrary #EngineeringSpecification #SystemIntegration #HardwareDesign #TEConnectivity #ModuleInterface #BoardToModule

Socket Contact Tin 22-28 AWG Crimp Stamped #commonpartslibrary #connector

Rotary Switch 3 Position SP3T, Adjacent Contact 5A (AC), 500mA (DC) 125 VAC Through Hole #commonpartslibrary #switch #rotary

JST PH Connector Header Through Hole 2-pin 0.079" (2.00mm) battery connector JST PH 2 pin The B2B-PH-K-S is a 2-position vertical header connector with a 2.0 mm pitch, designed for mating with JST PH series crimp housings (e.g., PHR-2). It is commonly used in consumer electronics, battery connections, and small embedded systems due to its compact size and secure locking mechanism. Key Features Series: JST PH Series Number of Pins: 2 Pitch: 2.0 mm Mounting Type: Through-hole (vertical) Contact Type: Male pin header Mating Type: Friction lock (secure connection) Current Rating: ~2 A (typical, depends on wire and conditions) Voltage Rating: ~100 V Contact Material: Copper alloy (tin-plated) Housing Material: UL94V-0 rated plastic (flame-retardant) Operating Temperature: Typically -25°C to +85°C Typical Applications Battery connectors (Li-ion/LiPo packs) Power supply connections in small devices Embedded systems (e.g., Arduino, sensors) Consumer electronics (fans, LEDs, small appliances) #CommonPartsLibrary #Connector #Header #JST-PH

USB-C (USB TYPE-C) USB 2.0 Receptacle Connector 24 (16+8 Dummy) Position Through Hole, Right Angle The USB4085-GF-A is a USB Type-C receptacle connector designed for compact embedded and consumer electronic applications requiring USB connectivity and power delivery support. It provides a reversible plug interface compliant with USB Type-C mechanical specifications and is commonly used in portable devices, development platforms, industrial electronics, and power-enabled USB systems. This connector supports USB data communication and power connections through a surface-mount design optimized for automated PCB assembly. The device includes integrated through-hole shell stakes for enhanced mechanical retention and durability under repeated insertion cycles. Its compact footprint and standardized pin arrangement enable compatibility with modern USB Type-C implementations while maintaining reliable electrical and mechanical performance. The USB4085-GF-A is suitable for USB charging, data transfer, embedded systems, battery-powered devices, and general-purpose USB Type-C interface applications. Engineering Specification Connector Type USB Type-C Receptacle Connector USB Interface Standard USB Type-C compliant receptacle Mounting Style Surface-mount technology with through-hole shell retention tabs Contact Configuration Dual-row reversible USB Type-C contact arrangement Number of Contacts Twenty-four signal and power contacts Orientation Right-angle PCB mount Data Support USB data communication support compatible with USB Type-C applications Power Capability Supports USB power and charging applications Shielding Integrated metal shell shielding for EMI reduction and mechanical protection Mechanical Retention Reinforced through-hole shell stakes for connector stability and insertion durability Contact Material Copper alloy contacts with plated finish for conductivity and corrosion resistance Housing Material High-temperature thermoplastic suitable for reflow soldering Operating Temperature Range Industrial-grade operating temperature capability suitable for embedded electronic systems Assembly Compatibility Compatible with automated SMT reflow assembly processes Application Areas Portable electronics, embedded systems, industrial controllers, development boards, battery-powered devices, USB charging interfaces, and communication equipment #commonpartslibrary #connector #usbtypec #interface #powermanagement #embeddedhardware #electronics #usbconnector

Connector Header Through Hole 22 position 0.100" (2.54mm) PinHeader_1x22_P2.54mm_Vertical General Description The TSW-122-07-G-S is a through-hole vertical pin header manufactured by Samtec. It is part of the TSW series, designed for board-to-board or wire-to-board interconnections. This component features a single-row configuration with standard 2.54 mm pitch spacing, making it widely compatible with common prototyping and production PCB designs. It is commonly used in embedded systems, development boards, and general-purpose electronic assemblies requiring reliable and cost-effective connectivity. Key Features Single-row vertical pin header Through-hole mounting style Standard 2.54 mm pitch spacing Tin-plated contacts for reliable electrical connection Black thermoplastic insulator housing Designed for board-to-board or cable interfacing Compatible with standard mating connectors and sockets Electrical Characteristics Current rating suitable for signal-level and low-power applications Contact resistance designed for stable electrical performance Insulation resistance suitable for typical PCB environments Mechanical Characteristics Number of positions: twenty-two Row configuration: single row Mounting type: through-hole Orientation: vertical Contact material: copper alloy Contact plating: tin Housing material: high-temperature thermoplastic Environmental Characteristics Operating temperature range suitable for industrial and commercial electronics RoHS compliant Designed for durability under normal handling and soldering conditions Applications Microcontroller and development boards Prototyping platforms Board-to-board interconnections Embedded systems General electronic assemblies #commonpartslibrary #connector #header

4 Position Wire to Board Terminal Block Vertical with Board 0.197" (5.00mm) Through Hole The WAGO 2604-3104 is a through-hole PCB terminal block designed for secure wire-to-board power and signal connections in industrial and commercial electronic equipment. It features WAGO Push-in CAGE CLAMP® spring connection technology with integrated lever actuation, allowing fast, tool-free wire insertion and removal. The connector is intended for reliable field wiring applications where vibration resistance, ease of maintenance, and compact PCB integration are required. Engineering Specification Manufacturer: WAGO Manufacturer Part Number: 2604-3104 Product Family: PCB Terminal Block Series: 2604 Connector Type: Wire-to-Board Terminal Block Mounting Style: Through-Hole PCB Mount Orientation: Vertical / Top Entry Number of Positions: 4 Pitch Spacing: 5.00 mm Connection Technology: Push-in CAGE CLAMP® Actuation Method: Lever Operated Wire Size Range: 24 AWG to 12 AWG Supported Conductors: Solid, stranded, and ferruled wires Rated Voltage: Up to 400 V IEC, 300 V UL Rated Current: Up to 32 A IEC, 20 A UL Operating Temperature Range: -60°C to +105°C Insulation Material: Polyamide PA66 Contact Material: Electrolytic Copper Contact Plating: Tin-Plated Spring Material: Chrome Nickel Spring Steel Flammability Rating: UL94 V-0 Color: Gray housing with orange lever PCB Contact Type: THT solder pins Application Areas: Industrial controls, power distribution, automation systems, instrumentation, and general PCB power interconnects. #commonpartslibrary #connector #terminalblock

Battery Contact Clip 18650 1 Cell PC Pin #Battery-holder #Battery-clip

5 Position Circular Connector Receptacle, Female Sockets Solder The SDS-50J is a 5-position, right-angle PCB-mount DIN receptacle connector designed for reliable signal and power connections in audio, industrial control, instrumentation, and legacy DIN-based electronic equipment. It features a standard 180° DIN pin arrangement, through-hole mounting, and durable thermoplastic construction for secure board-level integration. The connector is part of the SDS-J series and is suitable for applications requiring dependable mating cycles and long-term mechanical stability. Key Features 5-pin standard DIN receptacle (180° pin configuration) Right-angle, through-hole PCB mounting Female socket contacts Rated up to 100 VAC Current rating up to 1–2 A (depending on operating conditions) Low contact resistance (20 mΩ typical) High insulation resistance (100 MΩ minimum) 500 VAC dielectric withstand voltage Operating temperature range: -40°C to +85°C UL94V-0 flame-retardant housing RoHS compliant Designed for approximately 1,000 mating cycles #SDS50J #DINConnector #RightAngleConnector #PCBMount #ThroughHole #CircularConnector #AudioConnector #IndustrialElectronics #CUIDevices #SameSky #ElectronicComponents #InterconnectSolutions

Board to Board & Mezzanine Connectors .050\" SEARAY High-Speed High-Density Open-Pin-Field Array Terminal 400 Position Connector High Density Array, Male Surface Mount, Right Angle Gold SEAM-40-01-L-10-2-RA-K-TR is a high-speed, high-density board-to-board mezzanine connector from the Samtec SEARAY™ series. It features a right-angle, surface-mount design with 400 positions arranged in a 10-row open-pin-field array on a 1.27 mm (0.050") pitch. The connector utilizes Samtec's Edge Rate® contact system, providing excellent signal integrity, durability, and support for high-speed differential pair routing in demanding communication, networking, and embedded computing applications. Key Features High-density 400-position open-pin-field array connector 1.27 mm (0.050") contact pitch for compact board-to-board interconnects Right-angle, surface-mount termination Rugged Edge Rate® contact system for reliable high-speed performance Supports high-speed serial protocols and differential pair routing Suitable for power, ground, and signal connections within the same connector Gold-plated contacts for enhanced reliability and corrosion resistance Board-guide feature for improved mating alignment Current rating up to 1.9 A per contact Voltage rating up to 240 VAC / 339 VDC Tape-and-reel packaging for automated assembly processes RoHS compliant and designed for high-reliability applications #Samtec #SEARAY #SEAM4001L102RAKTR #BoardToBoardConnector #MezzanineConnector #HighSpeedConnector #HighDensityInterconnect #EdgeRate #SurfaceMount #RightAngleConnector #EmbeddedSystems #TelecomEquipment #NetworkingHardware #IndustrialElectronics #PCBDesign

WP-BUFU REDCUBE Bush, full height: 7mm, total height: 10.5mm, thread length: 4mm, pin length: 3.5mm, raster: 2.54mm, REDCUBE Press-Fit; M5, blind 4mm 16 Pin Screw Terminal, Power Tap M5 Through Hole The 7461147 is a high-current PCB-mounted power terminal from the REDCUBE® WP-BUFU series by Würth Elektronik. It is designed to provide a robust and low-resistance connection for transferring high currents between cables, busbars, and printed circuit boards. The terminal utilizes press-fit technology, eliminating the need for soldering while ensuring a gas-tight, vibration-resistant electrical connection. It is particularly suitable for power distribution, industrial equipment, automotive electronics, battery systems, and renewable energy applications. Key Features High current rating up to 180 A M5 screw terminal for secure high-power connections Press-fit termination for solderless PCB assembly 16-pin through-hole mounting configuration Gas-tight electrical connection for long-term reliability Excellent resistance to vibration and mechanical shock Low contact resistance for efficient power transfer Simplifies manufacturing by eliminating soldering processes Suitable for high-current power distribution and battery applications RoHS compliant design Typical Applications Power supplies and power converters Battery management and energy storage systems DC-DC and DC-AC converters Industrial automation equipment Automotive power electronics Solar and wind energy systems High-current PCB power distribution networks #CommonPartsLibrary #REDCUBE #PowerTerminal #PressFit #HighCurrentConnector #PCBTerminal #WurthElektronik #IndustrialElectronics #AutomotiveElectronics #PowerDistribution #EnergyStorage #RenewableEnergy #7461147

Jack Modular Connector 6p6c (RJ11, RJ12, RJ14, RJ25) 90° Angle (Right) Shielded Cat5 The 615006141121 is a board-to-board or wire-to-board connector component designed for reliable electrical interconnection in electronic assemblies. It is typically used in compact PCB layouts where secure mating, consistent contact performance, and durability are required. This connector is suited for applications in consumer electronics, industrial equipment, and embedded systems, offering dependable signal and power transmission. Key Features: Compact connector design for space-constrained applications High-reliability contact interface Designed for PCB mounting ապահով secure mating and retention Suitable for signal and low-power connections Mechanical Characteristics: Mounting Type: Through-hole or surface-mount (depending on variant) Orientation: Vertical or right-angle configuration Contact Configuration: Multi-position connector Pitch: Standard fine-pitch spacing typical for board-level connectors Housing Material: High-temperature thermoplastic Contact Material: Copper alloy with plated finish Electrical Characteristics: Contact Resistance: Low contact resistance for stable signal integrity Insulation Resistance: High insulation resistance Rated Voltage: Suitable for low-voltage applications Current Rating: Designed for signal-level or moderate current carrying Environmental Characteristics: Operating Temperature Range: Suitable for standard industrial temperature ranges RoHS Compliance: Yes Durability: Designed for multiple mating cycles Applications: Embedded systems Consumer electronics Industrial control boards Communication devices PCB interconnect solutions #commonpartslibrary #connector #jackmodular