EEPROM Memory IC 256Kbit I2C 1 MHz 450 ns 8-SO The M24256E-FMN6TP is a 256-Kbit (32 Kbyte) I²C-compatible serial EEPROM from STMicroelectronics. It is designed for reliable, non-volatile data storage in a wide range of electronic applications including consumer, industrial, and automotive systems. The device supports standard (100 kHz), fast (400 kHz), and fast-mode plus (1 MHz) I²C communication, enabling efficient data transfer. It features byte and page write operations, low power consumption, and a high endurance of write cycles, making it suitable for frequent data logging and configuration storage. Housed in a compact SO8 package, the device is optimized for space-constrained PCB designs while maintaining robust performance and data retention capabilities. Key Features Memory size: 256 Kbit (32 Kbyte) Interface: I²C (2-wire serial interface) Clock frequency: Standard mode: 100 kHz Fast mode: 400 kHz Fast-mode Plus: 1 MHz Supply voltage range: 1.7 V to 5.5 V Page write capability: up to 64 bytes Write cycle time: ~5 ms (typical) Data retention: > 200 years Endurance: > 4 million write cycles Hardware write protection available ESD protection and latch-up immunity Functional Description The device operates as a slave on the I²C bus and supports: Byte write and read Page write (up to 64 bytes) Random and sequential read operations Memory addressing is internally managed using a 16-bit address pointer, allowing access to the full 32 KB memory array. The device includes an internal write cycle controller, eliminating the need for external timing management. Pin Configuration (SO8 Package) A0, A1, A2: Device address inputs VSS: Ground SDA: Serial data line SCL: Serial clock line WC: Write control (hardware write protection) VCC: Supply voltage Absolute Maximum Ratings Supply voltage (VCC): -0.3 V to 6.5 V Input voltage: -0.3 V to VCC + 0.6 V Storage temperature: -65°C to +150°C Operating temperature (industrial grade): -40°C to +85°C Electrical Characteristics Low standby current: < 1 µA (typical) Operating current: < 1 mA Input/output compatible with CMOS logic levels Schmitt trigger inputs for noise immunity Timing Characteristics Write cycle time: 5 ms (typical) Fast-mode Plus support up to 1 MHz Sequential read supports continuous data streaming Package Information Package type: SO8 (8-lead Small Outline) Mounting: Surface-mount (SMD) Tape & reel packaging (TP suffix) Applications Configuration storage Calibration data storage Data logging systems Industrial control systems Consumer electronics Embedded systems requiring non-volatile memory Advantages High endurance and long data retention Wide voltage range (ideal for mixed-voltage systems) Compact footprint High-speed I²C compatibility (up to 1 MHz) #commonpartslibrary #integratedcircuit #memory

Video Switch IC 1 Channel 14-SOIC The LMH6574MAX/NOPB is a high-speed, 4:1 video multiplexer amplifier manufactured by Texas Instruments. It is designed for routing multiple analog video or high-bandwidth signals into a single output while maintaining excellent signal integrity. With wide bandwidth, low distortion, and fast switching characteristics, it is well-suited for applications such as video switching, RGB routing, medical imaging, and high-speed data acquisition systems. Key Features 4:1 high-speed analog video multiplexer Wide small-signal bandwidth: ~500 MHz (typical) Fast channel switching time: ~8 ns (typical) Low differential gain and phase for video fidelity High slew rate: ~1800 V/µs Low crosstalk and channel-to-channel isolation Single-supply operation: 5 V TTL/CMOS compatible logic inputs Internal 75 Ω back-termination support (video applications) Output disable (high impedance mode) Electrical Characteristics Supply Voltage (Vcc): 4.5 V to 5.5 V Supply Current: ~13 mA (typical) Input Voltage Range: 0 V to Vcc Output Voltage Swing: ~2 Vpp (video typical) Gain: 2 V/V (fixed gain configuration) Input Resistance: High impedance Output Resistance: Low impedance (video drive capable) Dynamic Performance -3 dB Bandwidth: ~500 MHz Slew Rate: ~1800 V/µs Settling Time: ~10 ns Channel Switching Time: ~8 ns Crosstalk: <-60 dB (typical at 10 MHz) Package Information Package Type: SOIC-8 (MAX) Mounting Type: Surface Mount Lead Finish: NiPdAu (RoHS compliant) Operating Temperature Range: -40°C to +85°C Pin Configuration (Summary) 4 Analog Inputs (IN0–IN3) 1 Analog Output (OUT) 2 Digital Select Lines (A0, A1) Enable/Disable Control (EN) Power Supply (Vcc) Ground (GND) Applications Video signal routing and switching (RGB, CVBS) CCTV and broadcast systems Medical imaging equipment Test and measurement instruments High-speed analog multiplexing Data acquisition front-end switching Compliance & Notes RoHS compliant (NOPB = Lead-free package) Designed for 75 Ω video systems Requires proper PCB layout for high-frequency performance (controlled impedance, short traces) #commonpartslibrary #integratedcircuit

Ultra wide band RF module With ranging location capabilities, I2C, UART, SPI, +2.8V to +3.6V VCC #RF #SPI #RTLS #commonpartslibrary

This is a QRE1113 opto-reflective sensor module, using a 47K pull-up resistor (R2) and a 100 Ohm resistor (R1). It includes a 1µF capacitor (C1) for stability and attaches to a JST connector (J1) for easy interfacing. Power is provided via VCC, with the output signal (OPTO_OUT) fed back. #OpticalSensor #industrialSensing #reusable #module #industrialsensing #onsemi #sublayout

High-Performance Digital PFC + Analog LLC Combo Controller with Standby Power Input to VCC #ultralibrarian

High-Performance Digital PFC + Analog LLC Combo Controller with Standby Power Input to VCC #ultralibrarian

High-Performance Digital PFC + Analog LLC Combo Controller with Standby Power Input to VCC #ultralibrarian

RS232 interface IC, 3 drivers, 5 receivers, 3.3V/5V Vcc supply, bipolar Vdd/Vss supply, 120kb/s, SOIC-20 rs232 uart transceiver line-driver SOIC*7.5x12.8mm*P1.27mm*

High-Performance Digital PFC + Analog LLC Combo Controller with Standby Power Input to VCC #ultralibrarian

Ultra wide band RF module With ranging location capabilities, I2C, UART, SPI, +2.8V to +3.6V VCC DWM1000 DecaWave RF ranging UWB *DWM1001*