Automotive H-Bridge DC Motor Driver IC – Fully integrated 40 V H-bridge motor driver with integrated power MOSFETs for brushed DC motors and one winding of a bipolar stepper motor. Operates from a 4 V to 40 V supply, delivers up to 5 A continuous output current, and features a PWM control interface with integrated current-sense output for motor monitoring. Includes an internal charge pump for high-side gate drive, low-RDS(on) MOSFETs, current regulation, undervoltage lockout (UVLO), overcurrent protection (OCP), thermal shutdown, and shoot-through protection. Qualified to AEC-Q100 Grade 1, operates over a −40°C to +125°C junction temperature range, and is housed in an 18-pin QFN (3 × 4 mm) wettable-flank package. #MonolithicPowerSystems #MPS #MPQ6612AGLEAEC1P #MPQ6612A #MotorDriver #HBridge #BrushedDCMotor #StepperMotor #CurrentSense #PWM #PowerMOSFET #AECQ100 #Automotive #EmbeddedSystems

Buck-Boost Switching Regulator IC Positive Adjustable (Fixed) 6.5V (11.5V) 1 Output 6A 22-PowerWFQFN The MAX25239/MAX25240 are small, synchronous, buck-boost converters with integrated H-bridge switches. These ICs provide a fixed-output regulation voltage and an externally adjustable output voltage in the 3V to 20V range with an input voltage above, below, or equal to the output regulation voltage. The ICs have typical 8.2A and 10A input current limit options and can support continuous load currents up to 6A depending on the input-to-output voltage ratio and operating frequency. It also has a wide input voltage range of 2V to 36V. The MAX25239/MAX25240 have three switching frequency options: 2.1MHz, 400kHz, and 200kHz. The 2.1MHz high switching frequency allows small external components and reduced output ripple, and guarantees no AM band interference, while the 400kHz or 200kHz switching frequency offers better efficiency and relieves the power consumption concern. The SYNC input allows three operation modes: skip mode with ultra-low quiescent current, forced fixed-frequency PWM operation, and synchronization to an external clock. The IC also includes spread-spectrum frequency modulation to minimize EMI interference. The MAX25239/MAX25240 feature a power-OK (POK) indicator, undervoltage lockout, overvoltage protection, cycle-by-cycle current limit, and thermal shutdown. The ICs are available in small, 4.25mm x 4.25mm x 0.75mm, 22-pin FC2QFN and 5.00mm x 5.00mm x 0.75mm, 18- pin FCQFN packages. Key Features Wide 2 V to 36 V input voltage range Synchronous buck-boost topology for seamless step-up and step-down conversion Delivers up to 6 A continuous output current Adjustable output voltage from 3 V to 20 V (device variant includes fixed output configuration options) High conversion efficiency with integrated low-RDS(ON) MOSFETs 400 kHz switching frequency with spread-spectrum option for reduced EMI Very low 95 µA quiescent current in standby and 10 µA shutdown current Integrated protection features including overvoltage, short-circuit, thermal shutdown, and undervoltage lockout (UVLO) Power-Good (PGOOD) output for power monitoring AEC-Q100 qualified for automotive applications Operating junction temperature range: −40°C to +150°C Compact 22-pin FC2QFN (4.25 × 4.25 mm) package #MAX25240AFFFVY #AnalogDevices #BuckBoostConverter #DCDCConverter #PowerManagement #AutomotiveElectronics #AECQ100 #SwitchingRegulator #EmbeddedSystems #AutomotivePower

H-Bridge driver, 1A, Low Voltage, PWM input, WSON-8 half bridge driver WSON*1EP*2x2mm*P0.5mm*

Simple Dual H-Bridge Motor Driver with Separate Input and Enable Pins #ultralibrarian

4.5V to 45V 2.5A Simple Dual H-Bridge Driver (HS/LS) #ultralibrarian

Simple Dual H-Bridge Motor Driver with Separate Input and Enable Pins #ultralibrarian

5V to 60V H-Bridge Gate Driver AEC-Q100 Qualified #ultralibrarian

4.5V to 45V 2.5A Simple Dual H-Bridge Driver (HS/LS) #ultralibrarian

Reversible DC motor drive with speed control, 3-18V, 0.85A, SOIC-8 H-bridge, motor driver, PWM, single coil SOIC*3.9x4.9mm*P1.27mm*