Circuit Board Hardware - PCB TEST POINT, PC Test Point, Miniature Phosphor Bronze Silver Plating Surface Mount Mounting Type #CommonPartsLibrary #Test-point

The NE555 devices are precision timing circuits capable of producing accurate time delays or oscillation. In time-delay or monostable operating modes, the timed interval is controlled by a single external resistor and capacitor network. In the astable mode of operation, the frequency and duty cycle are controlled independently with two external resistors and a single external capacitor. Each timer has a trigger level equal to approximately one-third of the supply voltage and a threshold level equal to approximately two-thirds of the supply voltage. These levels can be altered by use of the control voltage pin (CONT). When the trigger input (TRIG) is less than the trigger level, the flip-flop is set and the output goes high. If TRIG is greater than the trigger level and the threshold input (THRES) is greater than the threshold level, the flip-flop is reset and the output is low. The reset input (RESET) overrides all other inputs and is used to initiate a new timing cycle. If RESET is low, the flip-flop is reset and the output is low. Whenever the output is low, a lowimpedance path is provided between the discharge pin (DISCH) and the ground pin (GND). Tie all unused inputs to an appropriate logic level to prevent false triggering. The output circuit is capable of sinking or sourcing current up to 200mA. Operation is specified for supplies of 5V to 15V. With a 5V supply, output levels are compatible with TTL inputs. Features - Timing from microseconds to hours - Astable or monostable operation - Adjustable duty cycle - TTL-compatible output can sink or source up to 200mA - On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. Applications - Pulse-shaping circuits - Missing-pulse detectors - Pulse-width modulators - Pulse-position modulators - Sequential timers - Pulse generators -F requency dividers - Industrial controls

Active (driven circuit included) 85dB@5V,10cm Magnetic 2700Hz Plugin,D=12mm Buzzers ROHS #CommonPartsLibrary #Audio #Vibration-Motor #Buzzer

2 Position Wire to Board Terminal Block Horizontal with Board 0.197" (5.00mm) Through Hole screw terminal 2 pin 3.5mm This component is a printed circuit board mounted screw terminal block designed to provide a secure and serviceable wire-to-board connection. It accommodates two conductors and uses a screw clamp mechanism to ensure reliable electrical and mechanical contact. The compact 3.5 mm pitch makes it suitable for space-constrained designs while maintaining adequate creepage and clearance distances for low-voltage applications. The terminal is intended for through-hole mounting and supports field wiring without the need for specialized tools, making it appropriate for industrial control systems, power distribution modules, and general-purpose electronic assemblies. Mechanical Characteristics: The terminal block is constructed with a high-temperature thermoplastic housing that provides mechanical strength and electrical insulation. The housing is typically green in color and designed for side-entry wire insertion. The clamping system uses metal screws and pressure plates to secure stripped wire ends. The component is designed for through-hole PCB mounting with soldered pins providing structural stability. The form factor supports modular placement along the PCB edge for accessible wiring. Electrical Characteristics: The device is designed for low to moderate voltage and current applications typical of signal and power connections in control electronics. Conductive elements are made from metal alloys with appropriate plating to ensure good conductivity and resistance to corrosion. The screw clamp connection provides stable contact resistance under vibration and thermal cycling conditions. Material and Environmental Characteristics: The insulating body is made from flame-retardant thermoplastic material compliant with relevant safety standards. The component is suitable for standard operating temperature ranges encountered in industrial and commercial electronics. Materials are selected to meet common environmental and regulatory requirements such as RoHS compliance. Application Considerations: This terminal block is intended for applications requiring reliable field wiring connections, ease of maintenance, and secure termination. It is commonly used in power supplies, control panels, interface modules, and embedded systems. Proper PCB footprint design and adherence to recommended soldering practices are required to ensure optimal performance and reliability. #CommonPartsLibrary #Connector #Terminal-Block #WR-TBL Series 1377

LED Circuit Board Indicator LED Circuit Board Indicator Single Green, Red Diffused, White 2.2V Green, 2V Red 25mA Green, 30mA Red Round with Domed Top 3mm, T-1 Through Hole, Right Angle #CommonPartsLibrary #LED #Optoelectronic #CircuitBoardIndicator #Array #LightBar #Bar-Graphs #WP937

Battery Holder (Open) 9V 1 Cell PC Pin 9V battery holder through hole The BH9VPC is a through-hole, printed circuit board–mount battery holder designed to accommodate a single standard 9 V (PP3) battery. It provides a secure mechanical enclosure and reliable electrical interface for powering electronic assemblies directly from a PCB. The holder is constructed from durable insulating material with integrated metal contacts to ensure stable retention and consistent electrical connection during operation. Its form factor supports straightforward integration into compact designs while maintaining ease of battery replacement. Engineering Specification: The component is intended for through-hole mounting using PC pins that provide both mechanical stability and electrical connection to the circuit board. It supports one 9 V battery with standard snap terminal interface internally routed to PCB pins. The housing material is typically molded plastic with good mechanical strength and electrical insulation properties suitable for general electronic applications. Contact terminals are metal, commonly nickel-plated or equivalent, to ensure low contact resistance and corrosion resistance over repeated battery insertions. The holder is designed for vertical mounting orientation relative to the PCB, with a compact footprint suitable for space-constrained layouts. It provides sufficient retention force to secure the battery under normal handling and vibration conditions encountered in consumer and light industrial electronics. The operating characteristics are aligned with typical 9 V battery usage, supporting low to moderate current applications depending on battery capability. The part is compatible with standard wave soldering processes used in through-hole assembly. It is intended for use in ambient environmental conditions typical of indoor electronic equipment and is not inherently sealed against moisture or contaminants. The design allows easy manual insertion and removal of the battery without specialized tools, supporting maintenance and replacement in field applications. #commonpartslibrary #batteryholder

Fuse Holder 32V 1 Circuit Blade Through Hole The 178.6764.0001 is an automotive blade fuse holder from Littelfuse, part of the MINI® FL1 series, designed for direct PCB mounting (through-hole). It allows easy integration of a single MINI blade fuse into a printed circuit board for overcurrent protection. This component is commonly used in automotive electronics, industrial control systems, and embedded power circuits, where compact and reliable fuse protection is required. Key Features Fuse Type Compatibility Supports MINI® automotive blade fuses (ATM/APM type) PCB Mount (Through-Hole) Designed for direct soldering to PCB for strong mechanical support Current Capability Up to 30 A maximum ~22 A continuous rating Voltage Rating Up to 58 VDC (automotive systems) Single Fuse Position Holds 1 fuse per holder Thermoplastic Housing Heat-resistant black body UL94 V-0 flammability rating for safety Contact Material Tin-plated copper alloy terminals for reliable conductivity Standard PCB Pitch Approx. 7.62 mm pin spacing Modular Design Multiple holders can be mounted side-by-side for multi-channel protection blade fuse holder automotive PCB #Circuit-Protection #Fuseholders #FL1

Fuse Holder 30A 1 Circuit Blade Through Hole #CommonPartsLibrary #Fuse-Holder #Circuit-Protection fuse holder 5x20 pcb through hole

Connector Header Through Hole 6 position 0.100" Pin Header 1x06 2.54mm PinHeader 1x6 2.54mm The TSW-106-07-G-S is a through-hole vertical header designed for board-to-board and board-to-wire interconnection in electronic systems. It is part of a precision connector series known for high reliability, consistent mechanical alignment, and excellent electrical performance. The component is commonly used in applications requiring modular connectivity, prototyping flexibility, and secure signal routing between printed circuit boards or peripheral interfaces. Its design supports repeated mating cycles while maintaining stable contact integrity, making it suitable for both development and production environments. Functional Description This component functions as a single-row header that provides a direct electrical interface between a printed circuit board and a mating connector or cable assembly. It enables straightforward signal or power routing through plated pins that are soldered into the PCB. The vertical orientation allows perpendicular mating, supporting compact and efficient board layouts. The connector is designed to ensure proper alignment and retention during mating, reducing the risk of intermittent connections. Electrical Characteristics The header supports low-voltage signal transmission and moderate current levels typical of board-level interconnects. It offers low contact resistance to maintain signal integrity and efficient current flow. The contact system is designed to provide consistent electrical performance across repeated insertions, ensuring reliability in both signal and power applications. Mechanical Characteristics The component features a robust insulating housing that maintains pin alignment and structural integrity during handling and operation. The contact pins are fabricated from conductive material and plated to enhance durability, conductivity, and مقاومت to corrosion. The through-hole mounting style provides strong mechanical anchoring to the printed circuit board, improving resistance to mechanical stress and vibration. The design supports reliable mating with compatible connectors and ensures long service life. Environmental Characteristics The TSW-106-07-G-S is constructed using materials that provide stable performance under typical environmental conditions encountered in electronic assemblies. It is designed to withstand standard temperature ranges and environmental stresses such as humidity and mechanical handling, maintaining electrical and mechanical reliability over time. Applications This header is widely used in embedded systems, industrial electronics, development platforms, communication equipment, and general-purpose PCB interconnect applications. It is especially suited for designs requiring modular connectivity, easy assembly, and dependable signal transfer. Summary The TSW-106-07-G-S from Samtec is a reliable through-hole header solution that combines mechanical durability with stable electrical performance. Its straightforward design, compatibility with standard interconnect systems, and suitability for a wide range of applications make it a common choice for board-level connectivity in modern electronic designs. #CommonPartsLibrary #Connector #Header #TSW

3 Position Wire to Board Terminal Block Horizontal with Board 0.200" (5.08mm) Through Hole The 1730405 is a PCB terminal block from Phoenix Contact, belonging to the MKDS 2,5 series. It is designed for secure screw-type wire-to-board connections, commonly used in industrial control systems, power distribution, and PCB interface applications. This component provides a reliable mechanical and electrical connection between wires and printed circuit boards (PCB) with a standard 5.08 mm pitch. Key Features 3-position PCB terminal block Compact single-row configuration for signal or power connections Screw connection technology Secure and vibration-resistant wire termination Standard 5.08 mm pitch Compatible with common industrial PCB layouts Rated electrical performance Nominal voltage up to 400 V Nominal current up to 24 A (with proper conductor size) Wire compatibility Solid and stranded wires: 0.14 mm² to 2.5 mm² AWG range: approximately 30–12 AWG High insulation rating Insulating material: PA (Polyamide) Flame class: UL 94 V-0 High surge voltage capability Up to 4 kV surge rating Through-hole PCB mounting Designed for soldering into PCB for stable mechanical retention Industrial-grade durability Suitable for harsh environments and long-term use Typical Applications Industrial automation systems Power supply and distribution boards Control panels Embedded PCB wiring interfaces Electrical instrumentation systems 1x3 terminal block #CommonPartsLibrary #Connector #Terminal block

The TPS6213x series, manufactured by Texas Instruments, includes highly efficient, easy-to-use synchronous step-down DC-DC converters optimized for applications requiring high power density. These converters operate within a wide input voltage range from 3 V to 17 V and are capable of delivering up to 3 A of continuous output current. The series comprises multiple part numbers, namely TPS62130, TPS62130A, TPS62131, TPS62132, and TPS62133, each offering unique output configurations—adjustable outputs for TPS62130 and TPS62130A, and fixed outputs of 1.8 V, 3.3 V, and 5.0 V for TPS62131, TPS62132, and TPS62133 respectively. Key features of the TPS6213x series include the advanced DCS-Control™ topology for improved transient response and high output voltage accuracy, a programmable soft start, seamless transition to power save mode, and selectable operating frequency (either 1.25 MHz or 2.5 MHz). The device also encapsulates robust protection mechanisms such as short circuit and overtemperature protection. Housed in a compact 3-mm x 3-mm QFN-16 package, the IC includes additional functions like a power-good output and 100% duty cycle mode for low dropout conditions. With a highly integrated design that requires minimal external components, the TPS6213x series is ideal for step-down regulation in various applications including standard 12-V rail supplies, POL supplies, embedded systems, and portable devices.

2 Position Wire to Board Terminal Block Horizontal with Board 0.200" speaker terminal block 2 pin 5.08mm AK300/3 KF301-2P 5.08mm The 277-1247-ND connector is an electronic interconnect component intended for establishing reliable electrical connections between conductors or between a conductor and a printed circuit assembly. It is designed for ease of installation, secure retention, and consistent electrical performance in low- to moderate-power applications. The connector supports efficient wiring configurations while maintaining mechanical stability and minimizing contact resistance. It is suitable for use in prototyping, industrial assemblies, and general-purpose electronic systems where dependable connectivity and repeatable termination are required. Engineering Specification The connector shall provide a stable electrical interface capable of maintaining low contact resistance under specified operating conditions. It shall be constructed from materials that ensure adequate conductivity, corrosion resistance, and mechanical durability over its intended service life. The housing shall be fabricated from an insulating material with sufficient ताप resistance and dielectric strength to prevent electrical leakage or shorting during normal operation. The contact mechanism shall support secure wire or terminal engagement, preventing accidental disconnection due to vibration or handling. The connector shall accommodate compatible wire gauges within its rated range and ensure proper clamping or retention without causing conductor damage. Electrical ratings shall align with standard low-voltage applications, including defined limits for current and voltage handling. Mechanical dimensions shall conform to manufacturer-defined tolerances to ensure compatibility with mating components or mounting interfaces. The connector shall be designed for straightforward installation using common tools or manual insertion methods, depending on its termination style. Environmental performance shall include resistance to typical ambient conditions such as humidity and moderate temperature variation, without degradation of electrical or mechanical properties. The connector shall meet applicable industry standards for safety and performance where relevant. #CommonPartsLibrary #Connector #COMBICON MKDSN