• [Example] Arduino MKR Memory Shield

    [Example] Arduino MKR Memory Shield

    Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

    vaxiongciongdoua

    vaxiongciongdoua

    1 Star

  • Lethal Company Pro Flashlight Power Board V1

    Lethal Company Pro Flashlight Power Board V1

    Lethal Company Pro Flashlight Broken Features: - U2M cannot be line powered from this circuit so the LED driver does not regulate. [Find the acompanying button board here](https://www.flux.ai/markwuflux/lethal-company-pro-flashlight-button-board) -Ultra bright -Makes click noise from speaker -Wirelessly transmits battery life (maybe use Ubo to receive this) -Drive a SST-40 Chinese LED I want this thing to be super bright! The brighter the better, but keep it simple. These LEDs will draw a lot of power, so we need some sort of CC source. It doesn't have to have high bandwidth. I am thinking about a DIY microcontroller buck converter with PID duty cycle control. Mistakes in this V1 design: - No pullup resistor on PG of Module1

    markwuflux

    markwuflux

    92 Comments

    1 Star

  • Flux flashlight

    Flux flashlight

    It's dangerous to go alone... take this!

    rex-flux

    rex-flux

    1 Comment

    1 Star

  • TSAL_KE1_Green

    TSAL_KE1_Green

    Designing a Tractive System Active light(TSAL) circuit for an Electric Vehicle which does the following operations 1. The TSAL itself must have a red light, flashing continuously with a frequency between 2 Hz and 5 Hz and a duty cycle of 50%, active if and only if the LVS is active and the voltage across DC-link capacitors exceeds half the nominal TS voltage 2. The TSAL itself must have a green light, continuously on, active if and only if the LVS is active and ALL of the following conditions are true: ● All AIRs are opened. ● The pre-charge relay is opened. ● The voltage at the vehicle side of the AIRs inside the TSAC does not exceed 60 VDC or 50 VAC RMS. This schematic will include only the Green Light logic. We have to take proper care of High voltage and Low voltage isolation in this schematic because it will have to be implemented on the PCB as well.

    vsdave1616

    vsdave1616

    39 Comments

    1 Star

  • WiFi Door and Window Sensor

    WiFi Door and Window Sensor

    This project is a WiFi-enabled door and window sensor using the ESP8684-WROOM-02C module from Espressif Systems. It includes a triple-color LED indicator, Reed switch for detection, a 3.3V Regulatory mechanism, and USB C for firmware flashing. It's powered by a regular non-rechargeable AAA battery. #WiFi #MCU #ReferenceDesign #project #ESP8684 #referenceDesign #simple-embedded #espressif

    vasy_skral

    vasy_skral

    &

    cherepanyadima

    17 Comments

    1 Star

  • Brainstorm a new project with AI [Example]

    Brainstorm a new project with AI [Example]

    Cost-Effective USB-C 2S Li-Ion Charger with Integrated 1W LED Flashlight - Fully Discrete, Generic Components, Minimalist Design

    ransu21

    ransu21

    1 Star

  • Pumpkin PCB

    Pumpkin PCB

    Hand-sized pumpkin PCB The copper has been removed at the eyes and mouth so light can shine through from the back! 555 Timer has been selected to provide LED flashing at 0.5Hz Adjust R2 for differing speed!

    jlamflux

    jlamflux

    1 Star

  • flash

    flash

    Welcome to your new project. Imagine what you can build here.

    davynci

    davynci

  • 256Mb SPI Flash

    256Mb SPI Flash

    IC FLASH 256MBIT SPI

    chandanaknagol

  • Roland JV-1080 Flash Expansion Adapter DRC TEST

    Roland JV-1080 Flash Expansion Adapter DRC TEST

    Welcome to your new project. Imagine what you can build here.

    giulioz

    1 Comment

  • rp2040 flash memory v2

    rp2040 flash memory v2

    Use this template if you're planning to get your 1 to 2-layer board manufactured in JLCPCB. It has the via min/max and trace width constraints already baked as global rules. #project-template #template #manufacturer-design-rules

    k3uchhusten

  • esp32_can_v02 DB9 flash tool2

    esp32_can_v02 DB9 flash tool2

    Welcome to your new project. Imagine what you can build here.

    jithipp

  • Roland JV-1080 Flash Expansion Adapter

    Roland JV-1080 Flash Expansion Adapter

    Welcome to your new project. Imagine what you can build here.

    giulioz

  • Roland JV-1080 Flash Expansion Adapter

    Roland JV-1080 Flash Expansion Adapter

    Welcome to your new project. Imagine what you can build here.

    rex-test-org

    &

    rex-flux

  • [Example] Arduino MKR Memory Shield 7255

    [Example] Arduino MKR Memory Shield 7255

    Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

    gfhffb5

    38 Comments

  • [Example] Arduino MKR Memory Shield 9645

    [Example] Arduino MKR Memory Shield 9645

    Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

    exlusier

    28 Comments

  • Native Bee Hotel V2

    Native Bee Hotel V2

    This bee hotel version is an intermediary version that implements some featuresets. The main feature that we are leaving out is Matter support over Zigbee (for a wider range in the backyard). In this version, we are implmenting: -Legacy WiFi/BT connectivity. -Camera with flash capability -Solar Charging -Energy Storage -Humidity and Temp Sensor

    robertoml

    14 Comments

  • WeMos D1 mini template

    WeMos D1 mini template

    Here's a template for the popular ESP-8266EX microcontroller board, wemos D1 mini. A mini wifi board with 4MB flash based on ESP-8266EX #wemos #esp8266 #project-template #template

    nestyy

    14 Comments

  • [Example] Arduino MKR Memory Shield e0a9

    [Example] Arduino MKR Memory Shield e0a9

    Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

    darknigh

    13 Comments

  • [Example] Arduino MKR Memory Shield

    [Example] Arduino MKR Memory Shield

    Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

    pknofficialonewaycorp

    11 Comments

  • [Example] Arduino MKR Memory Shield ad15

    [Example] Arduino MKR Memory Shield ad15

    Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

    jhonatn777

    7 Comments

  • µGame 10

    µGame 10

    µGame is a game console that is programmable with Python. To get a fully functional device, you will need to compile and flash the UF2 bootloader and the special CircuitPython firmware. Instructions for that will be posted separately.

    vasyl

    7 Comments

  • WeMos D1 mini template

    WeMos D1 mini template

    Here's a template for the popular ESP-8266EX microcontroller board, wemos D1 mini. A mini wifi board with 4MB flash based on ESP-8266EX #wemos #esp8266 #project-template #template

    zxbxletx

    7 Comments

  • [Example] Arduino MKR Memory Shield 1fa3

    [Example] Arduino MKR Memory Shield 1fa3

    Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

    pippo1988

    7 Comments

  • [Example] Arduino MKR Memory Shield

    [Example] Arduino MKR Memory Shield

    Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

    sidharth08

    6 Comments

  • PIC16F628A-I/P

    PIC16F628A-I/P

    PIC PIC® 16F Microcontroller IC 8-Bit 20MHz 3.5KB (2K x 14) FLASH 18-PDIP #commonpartslibrary #integratedcircuit #microcontroller #pic16f

    feeeer

    6 Comments

  • [Example] Arduino MKR Memory Shield

    [Example] Arduino MKR Memory Shield

    Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

    lucluigui15

    6 Comments

  • [Example] Arduino MKR Memory Shield e9b3

    [Example] Arduino MKR Memory Shield e9b3

    Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

    victorrt

    5 Comments

  • WeMos D1 mini template

    WeMos D1 mini template

    Here's a template for the popular ESP-8266EX microcontroller board, wemos D1 mini. A mini wifi board with 4MB flash based on ESP-8266EX #wemos #esp8266 #project-template #template

    e4w

    5 Comments

  • test 1

    test 1

    Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

    hehehe

    4 Comments

  • STM32F405RGT6

    STM32F405RGT6

    ARM® Cortex®-M4 STM32F4 Microcontroller IC 32-Bit 168MHz 1MB (1M x 8) FLASH 64-LQFP (10x10)

    rajpai

    4 Comments

  • WeMos D1 mini template

    WeMos D1 mini template

    Here's a template for the popular ESP-8266EX microcontroller board, wemos D1 mini. A mini wifi board with 4MB flash based on ESP-8266EX #wemos #esp8266 #project-template #template

    gmgurgen

    3 Comments

  • WeMos D1 mini template

    WeMos D1 mini template

    Here's a template for the popular ESP-8266EX microcontroller board, wemos D1 mini. A mini wifi board with 4MB flash based on ESP-8266EX #wemos #esp8266 #project-template #template

    jacksparrow1991

    3 Comments

  • [Example] Arduino MKR Memory Shield 4207

    [Example] Arduino MKR Memory Shield 4207

    Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

    andressdxd

    3 Comments

  • [Example] Arduino MKR Memory Shield 0b13

    [Example] Arduino MKR Memory Shield 0b13

    Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

    liono

    3 Comments

  • [Example] Arduino MKR Memory Shield b35f

    [Example] Arduino MKR Memory Shield b35f

    Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

    cenikali

    1 Comment

  • [Example] Arduino MKR Memory Shield 6713

    [Example] Arduino MKR Memory Shield 6713

    Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

    anderson69s

    1 Comment

  • Passive Stereo Separator 767c

    Passive Stereo Separator 767c

    Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

    draven

    1 Comment

  • WeMos D1 mini template

    WeMos D1 mini template

    Here's a template for the popular ESP-8266EX microcontroller board, wemos D1 mini. A mini wifi board with 4MB flash based on ESP-8266EX #wemos #esp8266 #project-template #template

    z3abkar

    1 Comment

  • [Example] Arduino MKR Memory Shield 9d7e

    [Example] Arduino MKR Memory Shield 9d7e

    Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

    poulomi

    1 Comment

  • [Example] Arduino MKR Memory Shield 99da

    [Example] Arduino MKR Memory Shield 99da

    Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

    xavierloco2003

    1 Comment

  • [Example] Arduino MKR Memory Shield e7ee

    [Example] Arduino MKR Memory Shield e7ee

    Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

    xavierloco2003

    1 Comment

  • [Example] Arduino MKR Memory Shield 6e26

    [Example] Arduino MKR Memory Shield 6e26

    Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

    kkpss12

    1 Comment

  • Quadcopter-Naze-32

    Quadcopter-Naze-32

    Naze 32 Revision 6 Flight Controller Schematic At the heart of the Naze32 is a 32bit ST micro work horse of a processor, with untapped memory and cpu power and a host of equally impressive sensors. The Naze is also matched up with some of the nicest GUI programs and features to get the most out of your configuration. Naze32 rev6 Features: USB on right side PPM/PWM input as through-hole 3.3V, I2C on standard-size headers Fully pinout compatible with rev5 accessories (OSDoge etc) SBUS Inverter Spectrum satellite MPU6500 Sonar pads w/resistors added for direct connection to 5V sonar All extra pads (FT, GP, A5) on top, only sonar on bottom BMP280 barometer 16mbit flash Guide: https://www.dronetrest.com/t/naze-32-revision-6-flight-controller-guide/1605

    iannunes

    1 Comment

  • WeMos D1 mini template pH8p

    WeMos D1 mini template pH8p

    Here's a template for the popular ESP-8266EX microcontroller board, wemos D1 mini. A mini wifi board with 4MB flash based on ESP-8266EX #wemos #esp8266 #project-template #template

    rafaeler

    1 Comment

  • WeMos D1 mini template

    WeMos D1 mini template

    Here's a template for the popular ESP-8266EX microcontroller board, wemos D1 mini. A mini wifi board with 4MB flash based on ESP-8266EX #wemos #esp8266 #project-template #template

    rafaeler

    1 Comment

  • [Example] Arduino MKR Memory Shield 0cb9

    [Example] Arduino MKR Memory Shield 0cb9

    Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

    arnold1101

    1 Comment

  • [Example] Arduino MKR Memory Shield 18b0

    [Example] Arduino MKR Memory Shield 18b0

    Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

    raveeshadissanayake

    1 Comment

  • WeMos D1 mini template

    WeMos D1 mini template

    Here's a template for the popular ESP-8266EX microcontroller board, wemos D1 mini. A mini wifi board with 4MB flash based on ESP-8266EX #wemos #esp8266 #project-template #template

    kiki23

    1 Comment

  • [Example] Arduino MKR Memory Shield 73e3

    [Example] Arduino MKR Memory Shield 73e3

    Example project for an Arduino MKR shield. It adds an external flash memory to the Arduino MKR. Based on the Arduino MKR Shield template. #project #arduino #shield #MKR

    jc123

    1 Comment