An I2C extension shield with 6 shielded ethernet ports and a TCA9548 breakout board. This board is for the target side, any microcontroller with a standard Arduino header can use it. With proper target side hardware and an SSTP ethernet cable, the board provides robust i2c communication over 10ft(could be longer, haven't tested it yet) with a bitrate of 400kHz under a noisy environment( near motors, power cables, switches, etc). The shield board provides power to the target side and can power the i2c device. The board also supports drdy trigger, which is available on many i2c sensors. The TCA9548 breakout board is for a scenario in which all of your i2c devices have the same address. #Arduino #Uno #Shield #Template #project-template #project

10/100 Base-T/TX PHY Ethernet controller that supports PoE with SPI Interface. Based on W5500. Can be used as PoE injector. #project #referenceDesign #template #w5500 #PoE #EtherNet #RJ5

10/100 Base-T/TX PHY Ethernet controller that supports PoE with SPI Interface. Based on W5500. Can be used as PoE injector. #project #referenceDesign #template #w5500 #PoE #EtherNet #RJ5

10/100 Base-T/TX PHY Ethernet controller that supports PoE with SPI Interface. Based on W5500. Can be used as PoE injector. #project #referenceDesign #template #w5500 #PoE #EtherNet #RJ5

10/100 Base-T/TX PHY Ethernet controller that supports PoE with SPI Interface. Based on W5500. Can be used as PoE injector. #project #referenceDesign #template #w5500 #PoE #EtherNet #RJ5

9-30 V DC girişli; ESP32-S3, LTE-M/NB-IoT, Ethernet, RFID, QR, 7 inç HMI, izole RS485, güvenlik girişleri ve beş kuru kontak röle çıkışı içeren endüstriyel açık hava yıkama otomatı kontrol kartı.

Industrial Raspberry Pi CM4/CM5-compatible RTK base-station carrier with PoE+, external DC input, BQ25750 2S Li-ion UPS, USB hub, Mosaic-X5 mPCIe GNSS, Quectel EM05 LTE, Ethernet, watchdog, protection, and JLCPCB-focused manufacturing constraints.

Carrier board schematic for network-audio-sink v1.0 using plug-in dev board modules via pin headers plus selected on-board ICs. Initial net plan includes 5V_BUS, 3V3, GND, I2S0/I2S1 audio, SPI control, and Ethernet differential-pair nets.

Industrial ESP32-S3 master gateway with Ethernet (W5500), LoRa 433 MHz, microSD storage, RTC, USB-UART console/debug interface (CP2102N), and isolated RS485 ports using ADM2587 transceivers. The design includes ESP32-S3-WROOM-1-N16R2 as the main controller, W5500 Ethernet, LoRa antenna interface, microSD connector, RTC circuitry, CP2102N USB-to-UART programming/debug console, SC16IS752 UART expanders, isolated RS485 channels, power regulation, ESD/surge protection, connectors, and mounting holes. Cellular/BG95/SIM functionality and true RS232 console hardware are not included; J1 is used only as the microSD card connector.

ESP32-S3 Industrial PLC Controller schematic architecture for a 24 V industrial PLC with W5500 Ethernet, isolated RS485, 8 opto-isolated digital inputs, and 8 protected high-side outputs.

Industrial 24 V DC MESBox controller with embedded Linux SOM, STM32 real-time I/O, triple RJ45 Ethernet, TFT display, isolated inputs, protected transistor outputs, offline memory, surge/reverse-polarity protection, and EMC-focused layout constraints.

Placa tipo SBC basada en RK3566 con PMIC RK809, LPDDR4, eMMC, Ethernet RTL8211F, Wi‑Fi/BT RTL8723DS y conector USB‑C.

Multi-processor AI development board with STM32MP157-class MPU, RP2350/RP2040 companion MCU, ESP32-S3 WiFi/BT, DDR3L, storage, Ethernet, display/camera/audio, USB-C PD/DC power, and 100 mm x 72 mm 4-layer PCB target.

UK Smart Wall Switch Back Board: 802.3af PoE-powered 65x65mm relay and energy-monitoring back board with RJ45, isolated 5V/3.3V rails, W5500 Ethernet, BL0942 metering, touch ICs, and 12-pin pogo interface.

FieldLVC Pro Smart Network Tester - rugged touchscreen CAT5e/CAT6 smart network tester with STM32H7, ESP32 wireless, Ethernet diagnostics, PoE detection, battery USB-C power, and future TDR architecture.

Per-channel low-voltage controller PCB for RIL TC/HF/LeTID and PID test benches. STM32H7, 16-bit DAC setpoints, 24-bit ADC sense (4-wire), isolated digital interface to gate driver, PT100/RH conditioning, Ethernet, interlocks. Safety-critical brain board.

Slot-machine telemetry board with 5V or 12V input, removable ESP32 module interface, Ethernet connectivity, and isolated money pulse inputs.

Industrial multi-protocol gateway rebuilt in Flux with ESP32-WROOM-32E, Ethernet, CAN, RS485, USB-C, microSD, I2C, analog/digital I/O, status LED, and user switch. All resistors and capacitors target 0603 SMD packaging; connectors remain through-hole only where mechanical robustness requires it.

DIN-rail ESP32-S3 mains-powered controller with isolated 5 V supply, Ethernet RJ45, USB-C service port, and central LED module connector.

CNC hydraulic press brake controller with STM32H743, ADS1256, 5x DAC8501 ±10V outputs, 3x AD598 LVDT interfaces, isolated 24V digital inputs, 100BASE-TX Ethernet, watchdog, E-stop hardware disable, and 4-layer 220mm x 160mm PCB architecture. Domains: field 24V I/O, precision analog, logic/Ethernet. Safety behavior: E-stop and valve-disable force all analog command outputs to 0V-safe state and disable field enables; watchdog and power-good supervisor reset MCU on comms or rail faults. PCB constraints: L1/L4 signal+components, L2 solid GND, L3 power plane, 1.0mm board inset margin, RJ45 at edge, field connectors on opposite edge, isolation corridor between field wiring and logic/Ethernet, 4x M4 plated mounting holes inset 10mm from corners.

ESP-farm: 12‑Slot ESP32 Duino-Coin Mining Backplane with Ethernet and Protected Power Distribution — Power net fixes (12V_IN, STAR_5V, TVS topology) and passive MPN assignments (R38–R41, C1–C8) are complete, ERC is clean, and the design is ready for PCB layout

Ruggedized Neutrik EtherCON RJ45 Ethernet Interface PCB with ESD Protection

hãy thiết kế 1 schematic jig test 8 cổng Analog (4-20mA), 1 cổng ethernet, 2 cổng USB, 2 Relay, 2 cổng DI, 1 cổng modbus rs-485

10/100 Base-T/TX PHY Ethernet controller that supports PoE with SPI Interface. Based on W5500. Can be used as PoE injector. #project #referenceDesign #template #w5500 #PoE #EtherNet #RJ5

10/100 Base-T/TX PHY Ethernet controller that supports PoE with SPI Interface. Based on W5500. Can be used as PoE injector. #project #referenceDesign #template #w5500 #PoE #EtherNet #RJ5