A simple voltage divider to showcase how to make parts. A voltage divider is a simple circuit which turns a large voltage into a smaller one. Using just two series resistors and an input voltage, we can create an output voltage that is a fraction of the input. Voltage dividers are one of the most fundamental circuits in electronics.

Welcome to your new project. Imagine what you can build here.

This project is intended to validate automatic or prioritized input source selection (if any), or test performance across variable solar conditions using the simulation and code tool

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

This project involves designing a portable device that can inject a 1kHz sine wave signal into a 100V audio line to detect short circuits. The device should be compact (around the size of a smartphone) and include LED indicators to show the status: a green LED for normal operation and a red LED for short-circuit detection. The device will be powered either by a switching power supply or rechargeable batteries.

The Pico Macro Keyboard is a compact and powerful macro pad built using the latest Raspberry Pi Pico 2. Inspired by the Figma Creator Micro, this keyboard is designed for customizable control and enhanced productivity. It features mechanical switches with per-key RGB lighting, along with two rotary encoders for added functionality. With a modular 4-layer PCB and fully customizable keymaps, it seamlessly integrates with any software, making it perfect for designers, gamers, and power users alike.

An I2C extension board with LTC4311 bus accelerator and shielded ethernet port. This board is for the target side. With proper controller side hardware and an SSTP ethernet cable, the board provides robust i2c communication over 10ft(could be longer, haven't tested it yet) with a bitrate of 400kHz under a noisy environment( near motors, power cables, switches, etc). The breakout board receives power from the controller side and can power i2c device. The board also supports drdy trigger, which is available on many i2c sensors. #project #I2C #shielded #robust #ltc4311 #long-distance

The APM2300CA, manufactured by Sinopower Semiconductor, is a high-performance N-Channel Enhancement Mode MOSFET designed for power management in notebook computers, portable equipment, and battery-powered systems. This component delivers a maximum drain-source voltage (VDSS) of 20V and can handle continuous drain current up to 6A when VGS is 10V, ensuring robust performance for demanding applications. Its low RDS(ON) values of 25mΩ (typ.) at VGS=10V, 32mΩ (typ.) at VGS=4.5V, 40mΩ (typ.) at VGS=2.5V, and 65mΩ (typ.) at VGS=1.8V minimize power loss and heat generation. The APM2300CA is reliable and rugged, complying with RoHS standards and available in a lead-free, halogen-free SOT-23 package, featuring a maximum power dissipation of 0.83W at 25℃. It is optimized for fast switching, with total gate charge (Qg) of 6nC (typ.) at VGS=4.5V and a gate resistance (RG) of 6Ω, supporting efficient and precise control in diverse power applications.

This is a reference design of step-up dc-to-dc switching converter based ADP1613 with a 15V output #dcdc #power #boost #15V #referenceDesign #powermanagement #analogdevices #template #reference-design

The NTZD3154N, manufactured by ON Semiconductor, is a dual N-channel MOSFET designed for small signal applications. This component boasts a low RDS(on) for improved system efficiency and a low threshold voltage, making it highly suitable for applications such as load/power switches, power supply converter circuits, and battery management in devices like cell phones, digital cameras, and PDAs. The NTZD3154N features a compact 1.6 x 1.6 mm footprint and an ESD-protected gate, ensuring robust performance in constrained spaces. With a maximum drain-to-source voltage (VDSS) of 20 V and a continuous drain current of up to 540 mA (at 25°C), the NTZD3154N is optimized for efficient power management. The device is also compliant with RoHS standards, being Pb-Free and Halogen Free/BFR Free, ensuring environmentally friendly usage. The component is available in the SOT-563-6 package, identified by the specific device code "TV" and a date code marking.

Buck Converter Input Voltage: 220VAC Input Power: 30W AC Frequency : 50/60Hz Power Factor: 0.5 LED Output Voltage: 160V LED Output Current: 170mA Driver Efficiency : 93% Switching Frequency : 200kHz Output Current after diode bridge rectifier : 100mA Output Voltage after diode bridge rectifier : 310VDC

ESP32 8 Relay Board. Has onboard mains to 5V or can use the ESP VIN for the +5V. 8 onboard relays capable of switching about 5A without adding additional tin to the traces.

This circuit is an ultrasonic distance meter based on an ATTiny2313 microcontroller. It uses an HC-SR04 ultrasonic sensor to measure distance and displays the results on an OLED display. The power supply is constructed using a Boost converter (TPS613222A) and a 2-cell AA battery. Additionally, it also includes ISP for programming, RESET and START switches, and LED indicators. #project #Template #projectTemplate #ultrasonic #OLED #arduino #attiny2313 #TPS613222A #ISP #referenceDesign #simple-embedded #microchip #template #reference-design

This is an office productivity hub featuring an STM32F103C8T6 MCU, GC9A01A display driver, voltage regulator, capacitors, resistors, switches, USB-C, and SWD header. #referenceDesign #edge-computing #edgeComputing #stm #template #iot #stm32f1 #reference-design

This is a BLE to WiFi gateway Reference Design. It employs an ESP32 microcontroller and an STM32WB5MMGH6TR for BLE functionality. The design includes connectors, multiple capacitors, resistors, switches, and LEDs. USB Type-C is used for power and data. This could be used for IoT purposes in home automation or wireless sensor data transmission. #referenceDesign #edge-computing #espressif #stm #template #ble #reference-design

The Coffee Waker is a unique, full-featured coffee maker alarm clock designed to brighten your morning routine with the irresistible aroma of freshly brewed coffee. By seamlessly integrating multiple high-performance components onto a single main board, the Coffee Waker delivers both functionality and innovation: - **Processing & Connectivity:** Powered by an ESP32-S3, it offers built-in WiFi and Bluetooth, enabling smart scheduling, remote control, and over-the-air updates. - **Precision Sensing:** A 16-bit load cell ADC provides accurate measurements, ensuring precise weight sensing for coffee bean dosing or liquid volume monitoring. - **Quality Audio Output:** The onboard 16-bit MP3 DAC guarantees clear audio playback, from alarm sounds to any custom wake-up messages you program. - **Robust Power Handling:** With a 120V heater cartridge relay and a 12V wakeup light converter integrated, the board safely manages high voltage switching and provides a visually soothing light routine. - **Thoughtful Integration:** Designed with automotive-grade components, precision regulators, and careful signal routing, the Coffee Waker Main Board combines performance with reliability while keeping a compact footprint. Overall, the Coffee Waker transcends the ordinary alarm clock, merging daily utility with modern connectivity and a touch of luxury—making it the perfect addition to any nightstand. #CoffeeWaker #SmartHome #CoffeeMaker #AlarmClock #MorningRoutine #Technology #Innovation

Buck, Buck-Boost Switching Regulator Input Voltage Range 4.75V to 28V with 100% Duty Cycle Mode. Output 5V #project-template #voltageregulator #template

This project is an RF-ID lock circuit, complete with microcontroller (MCU). It features an RC522 RFID reader for identification, controlled by an STM32F103C8T6 MCU. The structure also includes an OLED display, lock circuit, and user interface switches. Designed to operate with a AAA battery power source. #MCU #referenceDesign #simple-embedded #stm #project #STM32 #lock #OLED #template #reference-design

Low-voltage logic-only CERILUME Phase 1 LED controller using an Arduino Nano ESP32 plug-in module, 5V logic level shifting for WS2812/SK6812 data, microphone input header, and labeled test pads. LED power distribution and high-current switching are intentionally out of scope.

This circuit is an ultrasonic distance meter based on an ATTiny2313 microcontroller. It uses an HC-SR04 ultrasonic sensor to measure distance and displays the results on an OLED display. The power supply is constructed using a Boost converter (TPS613222A) and a 2-cell AA battery. Additionally, it also includes ISP for programming, RESET and START switches, and LED indicators. #project #Template #projectTemplate #ultrasonic #OLED #arduino #attiny2313 #TPS613222A #ISP #referenceDesign #simple-embedded #microchip #template #reference-design

Raspberrypi Pico-based sampler, sequencer + drum machine w/ an embedded speaker, Adafruit I2S amplifier and momentary step switches, evoking the tr808 synthesizer ⁠