Chat

Welcome to Flux

Treat Flux like your intern. Tell it what you'd like to build and it'll get to work. You can also ask it questions, brainstorm ideas, and teach it your preferences. Learn More

Explain this part

Write a part description

Describe each pin

Verify Part Details

Recommend similar parts

Check availability & lifecycle

is there a part very similar to the LMP7704MAX/NOPB that is available in a throu...

samlobert

@copilot is there a part very similar to the LMP7704MAX/NOPB that is available in a through hole package? The datasheet can be found at https://www.mouser.com/ProductDetail/Texas-Instruments/LMP7704MAX-NOPB?qs=7lkVKPoqpbY2hAv8dix2gg%3D%3D

copilot

The LMP7704MAX/NOPB is a precision operational amplifier manufactured by Texas Instruments. It is a rail-to-rail input and output quad op-amp, meaning it contains four operational amplifiers in one package.

To find a similar part available in a through-hole package, you can look for quad operational amplifiers with similar specifications:

Precision op-amp with low offset voltage
Rail-to-rail input and output
Similar supply voltage range

One potential alternative is the LM324, but it is not as precision-focused as the LMP7704. A closer match, but still through-hole, could be the TL084, which offers higher input impedance and slightly different characteristics.

Here are some parts to consider:

TL084CN

Package: PDIP-14
Rail-to-Rail: Not rail-to-rail, but has high input impedance and low offset voltage.

LM324N

Package: PDIP-14
Rail-to-Rail: No, but widely used and available in through-hole.

TL074CN

Package: PDIP-14
Precision: Good precision, similar to TL084 but with JFET inputs for better input impedance and lower bias current.

Unfortunately, none of these alternatives offer the exact same combination of features as the LMP7704. You might need to evaluate the trade-offs between precision and packaging based on your project requirements.

samlobert

I need a high precision cmos input. Which of these meets this goal?

copilot

For a high precision CMOS input operational amplifier in a through-hole package, the TL074CN would be the best match compared to the options discussed:

TL074CN

Package: PDIP-14
Input Type: JFET inputs (not exactly CMOS, but high-impedance which is similar to CMOS inputs)
Precision: Good precision, low input bias current
Rail-to-Rail: Not rail-to-rail, but still suitable for many precision applications

The TL074 is known for its low input bias current and high input impedance, making it a good choice for precision applications where high input impedance is needed. It also features low input offset voltage (though not as low as the LMP7704), which is vital for precision applications.

Summary

Best Option: TL074CN for high precision and high input impedance in through-hole package

The other options (LM324N and TL084CN) do not meet the precision and high input impedance required for your need as closely as the TL074CN does.

I want to use the REF200AU/2K5 Dual Current Source. What is the compliance volta...

samlobert

@copilot I want to use the REF200AU/2K5 Dual Current Source. What is the compliance voltage? The datasheet can be found here: https://www.ti.com/lit/ds/symlink/ref200.pdf?HQS=dis-dk-null-digikeymode-dsf-pf-null-wwe&ts=1727969984358

copilot

I don't have access to external databases or the ability to view PDF documents directly. However, I can help guide you on how to find the compliance voltage for the

\text{REF200AU/2K5}

dual current source.

To find the compliance voltage in the datasheet:

Look for the section titled "Electrical Characteristics" or a similar heading.
Check if there is a parameter specifically labeled "Compliance Voltage."
Alternatively, search for operating conditions or voltage limits which may specify a minimum and maximum range for the output voltage at which the current source can still properly regulate the current.

If you find these details, they will indicate the compliance voltage range within which the current source can maintain its specified output current. If you need further assistance after reviewing the datasheet, feel free to ask!

samlobert

Explain what compliance voltage is in this context

copilot

In the context of a current source like the REF200AU/2K5, compliance voltage refers to the range of output voltage over which the device can maintain a constant current output. This is an important parameter because it defines the limits within which the current source can function properly.

Here's how it works:

Current Source Operation: A current source is designed to supply a constant current to a load irrespective of the load's resistance.
Compliance Voltage: For the current source to maintain its specified current, the voltage across the load needs to stay within a certain range. This is because the internal circuitry of the current source requires a certain minimum voltage to function correctly, and it has an upper limit, beyond which it cannot sustain the operation.

If the load resistance and, hence, the voltage drop across the load is too high or too low compared to this compliance voltage range, the current source might not be able to deliver the specified current accurately.

In summary, the compliance voltage determines the operational limits for the voltage across the load where the current source can maintain a constant current.

I need a through hole package alternative to the ADR440BRZ-REEL7 device. What ar...

samlobert

@copilot I need a through hole package alternative to the ADR440BRZ-REEL7 device. What are alternatives that are close to this device? The data sheet is located at: https://www.mouser.com/datasheet/2/609/adr440_441_443_444_445-3121478.pdf

copilot

To find a through-hole package alternative to the ADR440BRZ-REEL7, we need to consider the key specifications and features of the original device. The ADR440BRZ-REEL7 is a high-precision voltage reference with the following key characteristics and features:

Output Voltage: 2.048V
Initial Accuracy: ±0.04%
Temperature Coefficient: 3 ppm/°C
Output Current: ±10 mA
Operating Voltage Range: 2.8V to 15V
Package: SOIC-8 (Surface-Mount Device)

Given these specifications, I'll suggest a few through-hole package alternatives that come close in terms of features and performance:

LM4040BIZ-2.0/NOPB:
- Manufacturer: Texas Instruments
- Output Voltage: 2.048V
- Initial Accuracy: ±0.1%
- Temperature Coefficient: 50 ppm/°C
- Output Current: 15 mA
- Package: TO-92 (Through-Hole)
REF192GP:
- Manufacturer: Analog Devices
- Output Voltage: 2.048V
- Initial Accuracy: ±0.1%
- Temperature Coefficient: 25 ppm/°C
- Output Current: 30 mA
- Package: PDIP-8 (Through-Hole)
TL431ACLPR:
- Manufacturer: Texas Instruments
- Output Voltage: Adjustable
- Initial Accuracy: ±0.5%
- Temperature Coefficient: 34 ppm/°C
- Output Current: 100 mA
- Package: TO-92 (Through-Hole)
- Note: The TL431 series is adjustable and may require additional resistors to set the desired output voltage of 2.048V.

These components have similar functionalities and can be considered for use in your project depending on the prioritization of certain specifications like initial accuracy, temperature coefficient, and output current limits.

samlobert

find alternative options that are high precision

copilot

For high-precision voltage references in through-hole packages that closely match the specifications of the ADR440BRZ-REEL7, let's further narrow down the options based on:

Output Voltage: 2.048V
Initial Accuracy
Temperature Coefficient
Output Current

Here are some high-precision alternatives:

REF198GPZ:
- Manufacturer: Analog Devices
- Output Voltage: 4.096V (Note: REF198 can be considered for combination with a resistive divider to achieve 2.048V)
- Initial Accuracy: ±0.06%
- Temperature Coefficient: 5 ppm/°C
- Output Current: 30 mA
- Package: PDIP-8 (Through-Hole)
LM4040AIZ-2.0/NOPB:
- Manufacturer: Texas Instruments
- Output Voltage: 2.048V
- Initial Accuracy: ±0.1%
- Temperature Coefficient: 20 ppm/°C
- Output Current: 15 mA
- Package: TO-92 (Through-Hole)
LT1021DCS8-2.5#PBF:
- Manufacturer: Analog Devices
- Output Voltage: 2.5V (Note: this is slightly different and may need adjustment)
- Initial Accuracy: ±0.05%
- Temperature Coefficient: 5 ppm/°C
- Output Current: 10 mA
- Package: PDIP-8 (Through-Hole)
ADR431ARZ:
- Manufacturer: Analog Devices
- Output Voltage: 2.500V (Note: this is adjustable for certain voltage outputs, can be adapted for 2.048V)
- Initial Accuracy: ±0.1%
- Temperature Coefficient: 3 ppm/°C
- Output Current: 10 mA
- Package: PDIP-8 (Through-Hole)

While these options cover high precision and through-hole packages, please note that in some cases a voltage divider or other adjustment might be necessary to achieve exactly 2.048V. Adjusting precision resistors can achieve this for voltage references that output slightly different voltages.

are there any issues in this project?

samlobert

@copilot are there any issues in this project?

copilot

Sure! Let's walk through the given components and net connections for your astable multivibrator project to ensure everything looks correct.

Components and Connections

For an astable multivibrator using two 2N3906 PNP transistors, the connections should form two cross-coupled transistor stages with feedback.

Typical Schematic for Astable Multivibrator:

We'll assume the following structure based on the standard configuration for an astable multivibrator:

Two transistors: Q1 and Q2
Two capacitors: C1 and C2
Four resistors: R1, R2, R3, R4
Two LEDs: LED1 and LED2 for visual indication of oscillation
Power supply: +9V and GND

Examine the Net Connections

Let's review the net connections as described:

Net: Net 7
- Connects LED2: (K) to Q2: (C) and C2: (+).
Net: Net 2
- Common power net: Connects R2: (P2), R1: (P2), R3: (P2), R4: (P2), +9V: (P1), +9V: (P1), J1: (P1).
Net: GND
- Common ground net: Connects J1: (P2), Q1: (E), Q2: (E).
Net: Net 5
- Connects R2: (P1) to C1: (+) and Q2: (B).
Net: Net 4
- Connects C1: (-) to LED1: (K) and Q1: (C).
Net: Net 6
- Connects R3: (P1) to Q1: (B) and C2: (-).
Net: Net 8
- Connects LED2: (A) to R4: (P1).
Net: Net 3
- Connects LED1: (A) to R1: (P1).

Observations:

Feedback Capacitors and Resistors:
- Ensure that the capacitors C1 and C2 and the base resistors R2 and R3 are correctly connected to form the feedback loops for the cross-coupled transistors.
LED Connections:
- The LEDs LED1 and LED2 should be placed to indicate the output of the respective stages.
Power Supply:
- Make sure that all Vcc connections are correct and consistent, especially for PNP transistors, where the emitter goes to Vcc.

Potential Issues to Verify:

Transistor Orientation:
- PNP transistor emitters need to be connected to +9V and collectors to the feedback network/resistors.
LED Polarity:
- Ensure the anodes (A) and cathodes (K) of LEDs are correctly oriented.

Here are the detailed connections you should verify:

Transistor Connections:
- Q1 (2N3906)
  - Emitter (Q1:E) to +9V.
  - Base (Q1:B) to R2:P1 and C2:(-).
  - Collector (Q1:C) to C1:(-) and LED1:K.
- Q2 (2N3906)
  - Emitter (Q2:E) to +9V.
  - Base (Q2:B) to R3:P1 and C1:+.
  - Collector (Q2:C) to LED2:K and C2:+.

Final Steps:

Once you've verified these connections, it should ensure that your astable multivibrator operates correctly, producing an oscillation visible through the blinking LEDs.

If you have any specific issues or need further details, let me know!

Resistance

1kΩ

Resistance

1kΩ

LED2

LED1

Capacitance

10uF

Resistance

47kΩ

Capacitance

10uF

Resistance

47kΩ

No files yet

Reviews

Documents

Documents are markdown text files which describe project goals, capture details, or even simulation outputs.

Assets

CMICH Logo.svg

CMICH Logo

nv_logo.svg

nv_logoDefault

2-layer-thumb.png

2-layer-thumbThumbnail

Project Name

IEEE Workshop Astable Multivibrator

Description

Use this template if you're planning to get your 1 to 2-layer board manufactured in JLCPCB. It has the via min/max and trace width constraints already baked as global rules. #project-template #template #manufacturer-design-rules

Properties

Properties describe core aspects of the project.

Pricing & Availability

Distributor	Qty 1
Digi-Key	$0.94–$1.37
LCSC	$0.00–$0.09
Mouser	$0.80–$0.93

Controls

Welcome 👋

Flux accelerates your PCB design with AI.

Create your account to start using this component and bring your ideas to life.

samlobert / IEEE Workshop Astable Multivibrator

Files

No files yet