Top Side PCB Layout

Thought for 3 mins 11 sec
Thought for 5 sec
Searching tasks in /ryanf/solar-usb-c-1s-power-manager-test-testroledecoupling-7ef8~9fx…
Thought for 7 sec — Evaluating review process
2/4 Independently review placement constraints and power-stage geometry

Place all 110 components on the top side within the confirmed 50 × 60 mm outline

Independently review placement constraints and power-stage geometry

Correct unauthorized L6 substitution and resolve blocking U2 placement findings

Verify top-side-only placement, bounds, overlaps, keepouts, and DRC

Thought for 10 sec
Awaiting 1 task
"PCB Placement Review" completed.
Thought for 23 mins 46 sec
Thought for 7 sec
Managing 1 task
Thought for 12 sec — Fixing issues in the builder
3/4 Correct unauthorized L6 substitution and resolve blocking U2 placement findings

Place all 110 components on the top side within the confirmed 50 × 60 mm outline

Independently review placement constraints and power-stage geometry

Correct unauthorized L6 substitution and resolve blocking U2 placement findings

Verify top-side-only placement, bounds, overlaps, keepouts, and DRC

Thought for 11 sec
Thought for 8 sec
Awaiting 1 task
"PCB Placement Validation" completed.

flux

Placed all 110 components on the Top side of the 50 × 60 mm board. Verification shows zero overlaps, keepout/boundary violations, pad-access errors, or required power-stage errors; L6 was restored to the original Coilcraft XAL3225-102ME.
Open items
  • 10 non-blocking switching-stage advisories remain, mainly capacitor-bank alignment and minor routing detours.
Suggested next steps
  1. Clean up the remaining placement advisories.
  2. Route the power stages and board.
  3. Run final DRC and silkscreen cleanup.
Sign up to send

Files

Schematic

Layout

3D View

Solar USB-C 1S Power Manager Test [Test_Role_Decoupling] 7ef8

Solar USB-C 1S Power Manager Test [Test_Role_Decoupling] 7ef8 thumbnail