Started: Start an autolayout job that routes components on the PCB focusing on minimizing high-current loop areas and isolating RF-sensitive circuitry..
Thought for 4 sec
300 days
Worked
0:11
Started: Start an autolayout job that places components on the PCB focusing on minimizing high-current loop areas and isolating RF-sensitive circuitry..
Worked
0:29
Started: Start an autolayout placement-only job that places components on the PCB, prioritizing the “Phase” net class to minimize high-current loop areas and isolating RF-sensitive circuitry around the BLE antenna and signal nets..
Thought for 5 sec
300 days
Worked
0:12
Started: Run AutoLayout for routing all nets according to defined layout rules..
Worked
0:29
Started: Start an autolayout routing job to route all nets on the PCB according to the defined layout rules..
Thought for 9 sec
300 days
Worked
1:47
Started: Run DRC and system-level reviews to identify airwires, floating copper, and missing footprints..
Checking 4 design areas.
Checking 4 design areas.
Checking 4 design areas.
Checking 4 design areas.
Checking 4 design areas.
Checking 4 design areas.
Checking 4 design areas.
Checking 4 design areas.
Checking 4 design areas.
Worked
1:29
Started: Use @review with reviewTypes: ["design_rule_check_airwires","design_rule_check_floating_copper","design_rule_check_missing_footprints"]; document any violations or unresolved airwires, floating copper areas, or missing footprints..