USB C Sensor Node
Worked for 23 sec
Referenced guidance.
Thought for 15 sec — Searching for library schema
Created 6 tasks.
1/6 Rename project, create specification, and record initial requirements/power budget
Rename project, create specification, and record initial requirements/power budget
Select library parts for MCU, T/RH sensor, USB-C input, regulator, and protection
Add main components and supporting passives to the schematic
Wire USB-C power/protection, 3.3 V rail, MCU boot/debug, USB data, I2C sensor, and indicators
Create firmware/regulatory/bring-up project files
Run schematic/design checks and fix actionable issues
Thought for 8 sec
Reading project docs.
Renamed USB-C WiFi BLE TH Sensor.
Updated project description.
Set Domain, Connectivity, Connectivity and 2 more.
Thought for a moment
Creating documentation and estimates
I
create this design 
https://cdn-learn.adafruit.com/assets/assets/000/094/834/original/sensors_image.png?1600461991
Image
Thought for 16 sec
No project changes were made; the schematic is still empty. Execution is blocked because no ACUs are currently available.
Remaining work: recreate the reference’s SHT40 temperature/humidity section, then integrate the requested USB‑C protection/power stage and Wi‑Fi/BLE MCU, followed by ERC and connectivity verification.
Clarify required details
Create SHT40 section
Recreate schematic only
No schematic yet
Talk to Flux to get started.
