PSRAM SPI Module for Pi Pico
Thought for 31 sec
Alright, we'll focus solely on the PSRAM SPI module. Here's my next question:
- Do you have a specific PSRAM module part number in mind, or should I search the Flux library for an 8MB SPI PSRAM module suggestion?
4677 PSRAM (Pseudo SRAM) Memory IC 64Mbit SPI 133 MHz 8-SOIC
Thought for 30 sec
Below is a suggestion to add the PSRAM SPI module to your schematic:
Schematic Update:
- Add Component:
- 4677 PSRAM (Pseudo SRAM) Memory IC 64Mbit SPI 133 MHz 8-SOIC with designator U1.
- Key Considerations:
- Ensure proper power connections by connecting the VCC pins to the appropriate supply (with decoupling capacitors added per power pin as recommended by the datasheet).
- Connect the GND pins to the Ground component.
- Wire up the SPI interface pins (SCLK, CS, SI, SO) appropriately to your system or host interface when integrating with your design.
You can use the "Apply changes" button to add these schematic components and make the necessary wiring connections later as you integrate the module into your project.
Apply PSRAM change
Accept & plan SPI connection
Integrate and check datasheet
Proceed—prepare for MCU addition
