Autorouting Instructions
Thought for 38 sec
Below is an excerpt from our official documentation on activating the AI Auto Layout autorouting feature for your PCB:
-
Before starting:
- Ensure your schematic is finalized and that all components are placed.
- Confirm any routing constraints (e.g., keep-outs, board outline, critical nets) are set up.
- Verify your credit allowance since Auto Layout jobs consume Copilot credits based on design complexity.
-
To activate AI Auto Layout:
- Open your PCB layout in Flux.
- Locate and click the Auto Layout (autoroute) button at the bottom of the PCB editor.
- Once you click the button, AI Auto Layout will automatically route all remaining connections.
- After the process, you can review and fine-tune specific routes if needed.
For a more detailed walkthrough, please refer to our Auto-Layout tutorial and the related FAQ section on autorouting.
If you have further questions or need clarification on a specific step, feel free to ask!
Acknowledge and Proceed
Ask about Constraints
Clarify Preparation Steps
To get started, talk to Flux or create a New Document.
![ESPRSSO32 Smart Scale AI Auto Layout [Example] thumbnail](https://img-cdn.flux.ai/eyJidWNrZXQiOiJncmF2aXRvbi1lbGVjdHJpYy1zeW1ib2xzIiwia2V5IjoiZG9jdW1lbnRfYXNzZXRzL0VTUFJFU1NPMzJfU21hcnRfU2NhbGVfM0RfVGh1bW5haWwtY2QxNTI2NjItNjdjMi00MTk4LWJmNjUtNDJiZDk5N2E0ODYyLnBuZyIsImVkaXRzIjp7InJlc2l6ZSI6eyJ3aWR0aCI6MTM2LCJoZWlnaHQiOjEzNiwiZml0IjoiY29udGFpbiIsImJhY2tncm91bmQiOnsiciI6MCwiZyI6MCwiYiI6MCwiYWxwaGEiOjB9fX0sIm91dHB1dEZvcm1hdCI6IndlYnAifQ==)