WiFi & Bluetooth Sensor Node

flux

Implemented the schematic for the USB-C powered Wi‑Fi/BLE temperature/humidity node. It uses a SiWG917 Wi‑Fi/BLE 5.4 module, SHT41 T/RH sensor, USB-C sink input, TPS25940 true reverse-blocking eFuse with OVP/UVLO/OCP/soft-start, MP28301 3.3 V buck regulator, ESD protection, reset/ISP/SWD debug, I2C pull-ups, and status LED.
Created project files:
Open items:
  • PCB layout/routing is not done yet, so airwire DRC errors are expected.
  • Generic passives still need final manufacturer MPNs before manufacturing export.
  • Layout must enforce the SiWG917 antenna keepout and thermal isolation around the SHT41.
Suggested next steps:
  1. Set board size/stackup and move into PCB placement.
  2. Place U1 at the board edge with antenna keepout and U4 away from heat sources.
  3. Route power, buck, I2C, SWD/UART, and USB-C protection paths.
  4. Assign final passive MPNs and run full DRC/manufacturing checks.
Place route and MPNs
Start PCB placement
Assign passive MPNs
Route the PCB
Run full review

Demo Complete

The demo is finished. It didn't use any ACUs. You can now continue working with this project like normal.

D1
J1
U1
U2
U1 GND_16 - C9 P2
GND
GND
U4 VSS - C15 P2
U2 GND - U2 EP
GND
C3 P2 - C4 P2
U2 GND - U2 EP
U2 GND - U2 EP
U3 CTRL5 - R3 P2
SW1 GND - C17 P2
SW1 GND - C17 P2
U4 VSS - C15 P2
GND
GND
GND
U2 GND - U2 EP
C5 P2 - C6 P2
C16 P2 - SW1 NO_1
U1 GND_16 - C9 P2
C3 P2 - C4 P2
GND
C3 P2 - C4 P2
U1 GND_16 - C9 P2
U4 VSS - C15 P2
C5 P2 - C6 P2
SW1 GND - C17 P2
GND
C16 P2 - SW1 NO_1
U1 GND_16 - C9 P2
C5 P2 - C6 P2
C16 P2 - SW1 NO_1
GND
U1 GND_16 - C9 P2
U1 GND_16 - C9 P2
C5 P2 - C6 P2
SW1 GND - C17 P2
U3 CTRL5 - R3 P2
U2 GND - U2 EP
GND
GND
U1 GND_16 - C9 P2
U3 CTRL5 - R3 P2
GND
GND
GND
C3 P2 - C4 P2
GND
GND
U3 SW - L1 1
J1 VBUS__1 - U2 IN
U2 EN/UVLO - R5 P2
L1 2 - U3 OUT1
U1 POC_OUT - R13 P1
U2 OUT_1 - U2 OUT_2
J1 CC2 - R2 P1
J1 DP1 - J1 DP2
U2 IMON - R15 P1
L1 2 - U3 OUT1
U2 OUT_1 - U2 OUT_2
J1 CC1 - R1 P1
J2 2 - U1 JTAG_TMS_SWDIO
L1 2 - U3 OUT1
U4 SCL - U1 ULP_GPIO_1
J2 7 - U1 GPIO_8
U1 POC_OUT - R13 P1
J1 VBUS__1 - U2 IN
U2 ILIM - R3 P1
J1 DP1 - J1 DP2
U1 RESET_N - R12 P2
L1 2 - U3 OUT1
L1 2 - U3 OUT1
U2 EN/UVLO - R5 P2
L1 2 - U3 OUT1
J1 VBUS__1 - U2 IN
U2 ~{FLT} - R7 P1
U1 FLASH_IO_VDD - C14 P1
U1 ULP_GPIO_8 - R11 P1
R14 P2 - SW2 COM_1
J1 DN1 - J1 DN2
J2 8 - U1 GPIO_9
U2 DVDT - C2 P1
U1 RESET_N - R12 P2
U1 POC_IN - R13 P2
U3 PG1 - R8 P1
U1 POC_IN - R13 P2
J1 VBUS__1 - U2 IN
L1 2 - U3 OUT1
R11 P2 - LED1 A
U1 POC_IN - R13 P2
U2 OVP - R6 P2
U1 JTAG_TDO_SWO - J2 6
L1 2 - U3 OUT1
J1 VBUS__1 - U2 IN
J1 CC1 - R1 P1
J1 CC2 - R2 P1
U1 ULP_GPIO_8 - R11 P1
U3 PG1 - R8 P1
J1 DP1 - J1 DP2
U1 RESET_N - R12 P2
U3 OUT2 - C8 P1
U1 RESET_N - R12 P2
U4 SCL - U1 ULP_GPIO_1
J1 VBUS__1 - U2 IN
U2 OUT_1 - U2 OUT_2
J1 VBUS__1 - U2 IN
R14 P2 - SW2 COM_1
J1 DP1 - J1 DP2
U1 JTAG_TDO_SWO - J2 6
U2 OVP - R6 P2
J2 8 - U1 GPIO_9
J1 DN1 - J1 DN2
U2 ILIM - R3 P1
L1 2 - U3 OUT1
U1 JTAG_TDO_SWO - J2 6
J1 VBUS__1 - U2 IN
L1 2 - U3 OUT1
U2 EN/UVLO - R5 P2
L1 2 - U3 OUT1
U1 FLASH_IO_VDD - C14 P1
U2 OUT_1 - U2 OUT_2
J1 VBUS__1 - U2 IN
U2 OUT_1 - U2 OUT_2
J1 DN1 - J1 DN2
U4 SDA - U1 ULP_GPIO_0
U3 PG1 - R8 P1
J1 VBUS__1 - U2 IN
U3 VIN2 - C4 P1
U3 OUT2 - C8 P1
J1 CC2 - R2 P1
L1 2 - U3 OUT1
L1 2 - U3 OUT1
U3 VIN2 - C4 P1
L1 2 - U3 OUT1
U3 VIN2 - C4 P1
U2 DVDT - C2 P1
U2 ~{FLT} - R7 P1
L1 2 - U3 OUT1
U4 SDA - U1 ULP_GPIO_0
J2 7 - U1 GPIO_8
U2 OUT_1 - U2 OUT_2
J2 4 - U1 JTAG_TCK_SWCLK
J1 CC1 - R1 P1
U2 IMON - R15 P1
U3 SW - L1 1
L1 2 - U3 OUT1
U4 SCL - U1 ULP_GPIO_1
L1 2 - U3 OUT1
L1 2 - U3 OUT1
J2 4 - U1 JTAG_TCK_SWCLK
R14 P2 - SW2 COM_1
U2 OUT_1 - U2 OUT_2
U1 POC_IN - R13 P2
R11 P2 - LED1 A
L1 2 - U3 OUT1
U4 SDA - U1 ULP_GPIO_0
J1 DN1 - J1 DN2
J2 2 - U1 JTAG_TMS_SWDIO
U2 OVP - R6 P2
U2 ~{FLT} - R7 P1
U1 POC_IN - R13 P2
R1
Resistance
5.1kΩ
C4
Capacitance
10µF
C17
Capacitance
1nF
C7
Capacitance
100nF
C3
Capacitance
10µF
C5
Capacitance
10µF
R13
Resistance
100kΩ
R4
Resistance
100kΩ
R7
Resistance
100kΩ
C13
Capacitance
100nF
C2
Capacitance
10nF
C15
Capacitance
100nF
R10
Resistance
10kΩ
C8
Capacitance
1µF
R15
Resistance
19.1kΩ
R3
Resistance
88.7kΩ
R14
Resistance
100Ω
C14
Capacitance
1µF
C9
Capacitance
10µF
R2
Resistance
5.1kΩ
C10
Capacitance
100nF
R8
Resistance
100kΩ
R9
Resistance
10kΩ
R6
Resistance
39.2kΩ
C1
Capacitance
1µF
R11
Resistance
1kΩ
C16
Capacitance
10nF
C6
Capacitance
10µF
C12
Capacitance
100nF
R12
Resistance
10kΩ
C11
Capacitance
100nF
R5
Resistance
464kΩ
U3
D2
U4
D4
L1
SW1
SW2
LED1
J2
D3
  • Generic Inductor
    Generic Inductor
    A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
    jharwinbarrozo
    16.5k
  • Generic Capacitor
    Generic Capacitor
    A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Resistor
    Generic Resistor
    A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Net Portal
    Net Portal
    Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
    jharwinbarrozo
    43.0M
  • RMCF0805JT47K0
    RMCF0805JT47K0
    General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
    jharwinbarrozo
    1.2M
  • 875105359001
    875105359001
    10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
    jharwinbarrozo
    1.2M
  • CTL1206FYW1T
    CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
    jharwinbarrozo
    1.1M
  • 1070TR
    1070TR
    Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
    jharwinbarrozo
    700.5k
  • Ground
    Ground
    A common return path for electric current. Commonly known as ground.
    jharwinbarrozo
    20.5M
  • Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
    natarius

USB-C WiFi BLE TH Sensor

USB-C WiFi BLE TH Sensor thumbnail
Consumer USB-C powered environmental sensor node with Wi-Fi, BLE 5.x, digital temperature/humidity sensing, protected 5 V input, and a 3.3 V low-power MCU/sensor rail.

Layout Rules

mm

Yes

10mm

Top

deg

Properties

WiFi

USB-C

Consumer IoT

5

V

Bluetooth

Pricing & Availability

Distributor

Qty 1

Arrow

$3.25–$6.36

Digi-Key

$0.00

HQonline

$3.72–$3.82

LCSC

$5.53–$5.70

Mouser

$26.54

TME

$0.00

Verical

$4.43–$7.94

Controls