Toggle Switch Addition

1:21

Checking if I can make the changes for you.

Reviewing the bill of materials.

Analyzing the schematic.

Evaluating switch options.

Searching for switch options.

Searching for a component.

Searching library for: "Compact SMT slide switch for manually enabling and disabling an LDO regulator enable pin in a very small 8 mm x 10 mm sublayout. Prefer a simple SPDT or equivalent manual switch suitable for logic-level control, small footprint, easy hand assembly, and common availability."

Creating search plan for: "Compact SMT slide switch for manually enabling and disabling an LDO regulator enable pin in a very small 8 mm x 10 mm sublayout. Prefer a simple SPDT or equivalent manual switch suitable for logic-level control, small footprint, easy hand assembly, and common availability. --- MANDATORY search constraints (these MUST be applied to all searches): fieldCategories: ["core","type","manufacturer","packaging"] facetFilters: ["part_type:Switch"] hitsPerPage: 10 page: 0"

Searching: "Compact SMT 2-position slide switch (SPDT or SPST-as-SPDT) for PCB-mounted manual enable/disable, small footprint <10 mm in either dimension, easy hand-solderable, low-profile"

Found 25 results.

Searching: "Compact SMT slide switch for manually enabling and disabling an LDO regulator enable pin in a very small 8 mm x 10 mm sublayout. Prefer a simple SPDT or equivalent manual switch suitable for logic-level control, small footprint, easy hand assembly, and common availability. --- MANDATORY search constraints (these MUST be applied to all searches): fieldCategories: ["core","type","manufacturer","packaging"] facetFilters: ["part_type:Switch"] hitsPerPage: 10 page: 0"

Finished searching for a component.

components to be added to the project

Table


Part NamePurposeManufacturer Part NumberQuantityFootprintDatasheet link
Slide Switch SPDTManually drive U1 enable controlJS102011JCQN1SMD J-lead___
17 days
I dont see the slide switch in the schematics
17 days

0:30

Checking if I can make the changes for you.

You don’t see it because this project is a published part project and you can’t edit it directly from here, so no switch was actually added. The action tool says the right path is to fork this design first, then edit the copy and add the switch there.
Use this fork link to make an editable copy with the switch task prefilled:
After you open the forked copy, I can help with the next step.
Give me fork link
Use EN pin
Show switch placement
17 days

Ready.


To get started, talk to Flux or create a New Document.

Documents

    Documents are markdown text files which describe project goals, capture details, or even simulation outputs.

    Assets

    No assets added.

    ME6211C33M5G-N - LDO Regulator 5VDC to 3.3VDC 1206 CAPS

    ME6211C33M5G-N - LDO Regulator 5VDC to 3.3VDC 1206 CAPS thumbnail
    Sublayout for the ME6211C33M5G-N only in 8mm x 10mm, using 1206 Capcitors.

    Properties

    SUBLAYOUT

    Pricing & Availability

    Distributor

    Qty 1

    LCSC

    $0.05

    Controls