SCSI Adapter Design
Worked for 25 sec
Referenced guidance.
Thought for 15 sec — Searching for library schema
Created 6 tasks.
1/6 Rename project, create specification, and record initial requirements/power budget
Rename project, create specification, and record initial requirements/power budget
Select library parts for MCU, T/RH sensor, USB-C input, regulator, and protection
Add main components and supporting passives to the schematic
Wire USB-C power/protection, 3.3 V rail, MCU boot/debug, USB data, I2C sensor, and indicators
Create firmware/regulatory/bring-up project files
Run schematic/design checks and fix actionable issues
Thought for 8 sec
Reading project docs.
Renamed USB-C WiFi BLE TH Sensor.
Updated project description.
Set Domain, Connectivity, Connectivity and 2 more.
Thought for a moment
Creating documentation and estimates
I
Make a DB37 male SCSI to DB25 female SCSI adapter
Thought for 4 sec
No project changes were made because no ACUs are currently available.
Remaining work:
- Confirm the exact DB37 SCSI pinout/device standard and whether pin numbering is viewed from the mating face or solder side.
- Confirm DB25 female pin mapping, shield/chassis-ground treatment, and termination requirements.
- Add both connectors, wire the adapter, and verify continuity and pin orientation.
Use standard SCSI mapping
Create adapter schematic
Find connector footprints
Document mapping and test
No schematic yet
Talk to Flux to get started.
