Temperature and Humidity Sensor Node Design
Thought for 40 sec
I've updated the plan and started implementing it.
Route all traces and finalize the PCB layout.
Thought for 37 sec
I've updated the plan and started implementing it.
Before routing, use 8 mil clearance and 10 mil minimum trace width.
Worked for 25 sec
Set the PCB layout rules to 8 mil clearance and 10 mil minimum/default trace width before routing.
Set power trace width
Run DRC
Use 2-layer stackup
Place R1 nearby
Thought
- Set Layout's minTraceWidth to "10mil"
- Set Layout's traceWidth to "10mil"
- Set Layout's keepOut to "8mil"
