Based on the project provided, there's only one IC present, designated as U1, and it's an MPN: 1050170001 Chip module for charging a battery. However, the description does not provide information on connected decoupling capacitors, power nets, or voltages related to this IC. Without these details, I cannot determine if the required conditions for a "[WARNING]" are met or express the result in a markdown-formatted table with completely accurate information. Moreover, there are no relevant datasheet excerpts available for the MPN: 1050170001 IC.

Given this, I highly recommend that you add decoupling capacitors close to the power supply pins of your IC to filter out noise. The choice of capacitors would depend on the data provided by the manufacturer in the IC datasheet (no datasheet available in this case). For a typical digital IC, you might use 0.1µF and 1µF capacitors. For voltage values, use the supply voltage if no value is given, and always choose capacitors with a higher voltage rating than your supply voltage to account for possible spikes.

Here's an assumed example, please replace it with real values:

Bear in mind to specify power nets, capacitor values, and ICs in your project description when sharing for more accurate assistance.