Smart Humidity Sensor Design
Thought for 14 sec
- Updated 1 property in U1
- Updated 1 property in U2
- Updated 1 property in U3
- Updated 1 property in C1
- Updated 1 property in C2
- Updated 1 property in R1
- Updated 1 property in R2
- Updated 1 property in J1
Worked
1:05
Started: Analyze schematic and layout for manufacturability; compile issues list if any..
Checking 10 design areas.
Thought for 9 sec
Updated 6 document properties
Thought
We’ve completed your WiFi/BLE smart humidity sensor design end-to-end: the project description and Mermaid system architecture diagram have been updated, the schematic now includes the ESP32-WROOM-32, SHT31 sensor, TPS62133 buck regulator, 5 V barrel jack, decoupling capacitors, 4.7 kΩ I2C pull-ups and all required passives with proper net connections, and footprints have been assigned. A 4-layer PCB with dedicated 3.3 V and ground planes, mounting holes, antenna keep-out, classified nets, and correctly sized traces was defined, components were placed ensuring antenna clearance, all nets auto-routed, a design rule check run to clear airwires, and the BOM verified with lifecycle statuses to ensure full manufacturability.
