Fixing VIN Trace Errors
Thought for 18 sec
The placement/routing executor has finished. I’m reconciling its changes against the live board now, then I’ll independently verify connector clearance, VIN width, redundant copper, airwires, and DRC before closing.
Worked for 3 mins 37 sec
4/4 Run DRC and resolve issues introduced by the changes
Inspect J3/J4 placement, VIN routing, and redundant-trace DRC findings
Place J3 and J4 adjacent with suitable orientation and spacing
Remove redundant copper and reroute VIN at ≥6 mm width
Run DRC and resolve issues introduced by the changes
Thought for 8 sec
Thought for 7 sec
Reading layout details for J3, J4.
Checking routing progress.
Completed 8 design checks.
Thought for 8 sec
Awaiting 1 background task
"PCB Verification Review" completed.
Thought for 8 sec
The independent review is complete; I’m reconciling its report with the live DRC results and closing the final verification task.
Thought for 32 sec
J3 and J4 are now adjacent and aligned, with the VIN shared feed and branches routed at 6 mm. Short 1.7 mm neckdowns remain only where required by the connector pad width.
- Removed all 34 redundant trace/via objects
- 0 airwires
- 0 redundant traces
- DRC reports no errors or warnings
- Independent layout review passed all placement, connectivity, and routing checks
