Schematic Review and Suggestions
Thought for 1 min 55 sec
I can add the following component for you:
And create these net changes:
Connections to Remove:
Table
| Net | Connection |
|---|---|
| Net 1 | D10:A |
Connections to Add:
Table
| Net | Connection |
|---|---|
| Net 1 | R2:P1 |
| Net 5 | R2:P2 |
| Net 5 | D10:A |
Let me know when you’d like to apply these changes!
will you confirm the resistor i added to the D10 is good?
Thought for 29 sec
Yes—that 330 Ω value is exactly right for a 10 mA LED drive from 5 V:
Table
| Parameter | Calculation | Result |
|---|---|---|
| Supply – Vf | 5.0 V − 1.7 V | 3.3 V |
| Desired current (If) | 0.01 A | |
| Required resistance | (5.0 V − 1.7 V) / 0.01 A | 330 Ω |
| Power dissipation (P) | 0.033 W |
Find green LED
Calc resistor for 15 mA
Assign LED net class
Add test point
Add decoupling cap
