LED Installation and Error Fixing

sophia7

Add led light on place and fix all the errors

Thought for 1 min 8 sec

flux

Your goal is to add the LED and clear the current review issues.

Plan is ready:
1. Add the LED and wire its terminals correctly
2. Add missing project documentation
3. Set the missing manufacturer property
4. Verify the reviews are clean

Click Start on the plan bar to run it. If you want anything changed first, tell me and I’ll update the plan.

Add LED to power

Fix review issues

Use green 0603

Run final review

//This example code shows how to use Flux's API (https://docs.flux.ai/reference/api-overview) to add an LED simulator model to a part.
//It also changes the symbol to signal schematic users when the LED is turned on and when it's turned off based on simulator data.
//You can find this part in use in the Astable multivibrator example in your profile.
//Assigning the object ID of the terminals in the schematic editor to two variables
const anodeTerminalId = "63b04c1b-436c-3804-2af5-f29f2e88399c"; // Anode terminal ID
const cathodeTerminalId = "e5f77de8-474b-cc14-8e87-78778e0da1c6"; // Cathode terminal ID
//Get terminal objects by ID. 
const anodeTerminal = flux.getNodeById(anodeTerminalId, "elementTerminal");
const cathodeTerminal = flux.getNodeById(cathodeTerminalId, "elementTerminal");
//Create the output nodes that will be visible to users in the simulator tab on the schematic
const outputVoltage = flux.createOutputNode("vout");
const inputVoltage = flux.createOutputNode("vin");
const current = flux.createOutputNode("I");
const voltageDrop = flux.createOutputNode("vdrop");
//Setting up basic parameters of an LED. You can modify these parameters and see how the simulation changes when you put it in a project
const seriesResistance = 0.42;
const emissionCoefficient = 3.73;
const saturationCurrent = 93.2e-12;

Line: 27:23: 'event' is declared but its value is never read.Line: 34:24: 'event' is declared but its value is never read.Line: 40:23: 'event' is declared but its value is never read.

Reviews

No results...

Learn to Add a Component

Project Name

[Example] LED Simulator Template

Description

Simulator template for an LED part. Check out the Code editor for instructions!

Properties

Forward Voltage

1.70

Part Type

LED

Manufac…er Name

Manufac… Number

CTL1206FYW1T

Datasheet URL

page.venkel.com/hubfs/Resources/Datasheets/LEDs/CTL1206FYW1T.pdf

Designator Prefix

LED

Pricing & Availability

Distributor	Qty 1

Controls

Welcome 👋

Flux accelerates your PCB design with AI.

Create your account to start using this component and bring your ideas to life.