Finding ESP32-WROOM-32 Dev Kit
Thought for 2 mins 8 sec
Here are LM2596 step-down options that match your 4-pin/5-pin request:
Table
| Part | Part UID | Type | Notes | Datasheet |
|---|---|---|---|---|
| LM2596 DC-DC buck converter | 57f127f8-d33f-4a60-81ef-5919f0cc15a4 | Module | Adjustable module; typical header-style connections suitable for 4‑pin use (VIN/GND/VOUT/GND). | — |
| lm2596 step down module | f2970f9c-6ff2-4877-b29a-43f8bd4de4ed | Module | Adjustable 3–40 V in to 1.5–35 V out module; common 4‑pin style. | — |
| lm2596 step down module with extra pads | 7b773f79-206e-4c3d-8929-07c938f71631 | Module | Variant with extra pads—useful when you want 5‑pin style access (e.g., EN/ADJ). | — |
| LM2596T-5.0/NOPB | fe90151b-5836-40dd-823c-5ef623dc7535 | IC (TO‑220‑5) | Bare regulator IC (not a module); for designing your own board. | Datasheet |
Selection tips:
- Size the module for your load current with a 25% buffer, and use only up to 75% of its rated maximum power.
- If you need an enable or adjust pin brought out, pick the “extra pads” variant.
Which one should I add to your project?
I’ll go with ESP32-DEVKIT-V1. @library add 1c93d659-7108-4d22-834b-0229ead555b7
Thought for 1 min 14 sec
components to be added to the project
Table
| Part Name | Purpose | Manufacturer Part Number | Quantity | Footprint | Datasheet link |
|---|---|---|---|---|---|
| ESP32-DEVKIT-V1 | 30-pin ESP32-WROOM-32 development board for MCU + WiFi/BLE | ESP32-DEVKIT-V1 | 1 | Through Hole, 30-pin |
![[2-layer] JLCPCB Constraints thumbnail](https://img-cdn.flux.ai/eyJidWNrZXQiOiJncmF2aXRvbi1lbGVjdHJpYy1zeW1ib2xzIiwia2V5IjoiZG9jdW1lbnRfYXNzZXRzLzItbGF5ZXItdGh1bWItYzk4NzE0NGEtNTg0Ni00MzEyLTlkNDktNjBlZmM2N2FiMDk3LnBuZyIsImVkaXRzIjp7InJlc2l6ZSI6eyJ3aWR0aCI6MTM2LCJoZWlnaHQiOjEzNiwiZml0IjoiY29udGFpbiIsImJhY2tncm91bmQiOnsiciI6MCwiZyI6MCwiYiI6MCwiYWxwaGEiOjB9fX0sIm91dHB1dEZvcm1hdCI6IndlYnAifQ==)
mwmeyers03