Component Overview and Analysis
Worked for 2 mins 15 sec
SW1 is an OMRON B3FS-1050P tactile pushbutton switch.
Key datasheet ratings:
Table
| Parameter | Rating |
|---|---|
| Contact form | SPST-NO, momentary |
| Contact rating, resistive load | 1–50 mA, 3–24 VDC |
| Initial contact resistance | 100 mΩ max |
| Operating force | 0.98 ± 0.29 N / 100 ± 30 gf |
| Switch travel | 0.25 mm |
| Durability | 1,000,000 operations min |
| Operating temperature | -25°C to +70°C |
| Body size | 6 × 6 mm |
| Projected plunger height | 7.3 mm |
In this design, SW1 is a low-current momentary input switch. It should be used for logic/control signaling, not for switching significant power loads. Values came from the linked datasheet for B3FS-1050P; critical production limits should be verified against the original PDF because the extraction is OCR-based.
Check SW1 wiring
Run ERC/DRC
Find lower-profile switch
Show SW1 footprint
To get started, talk to Flux or create a New Document.
Welcome 👋
Flux helps you build PCBs faster with an AI teammate!
Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.