Power System Design Assistance
Thought for 35 sec
The following components have been added to your project:
Table
| Designator | Component | Link |
|---|---|---|
| U1 | ESP32-WROOM-32 | |
| U2 | MPU9250 | |
| U3 | NEO-6M GPS | |
| U4 | SX1276 LoRa | |
| SW1 | SW1 (Push Button) | |
| D1 | D1 (Status LED) | |
| JP1 | JP1 (Programming Port) | |
| CON1 | CON1 (Sensor Connector) | |
| SOL1 | SOL1 (Solar Cell) | |
| BAT1 | BAT1 (Rechargeable Battery) |
What's the next step you'd like to work on?
What STM processor would you recommend for a very low power device that reads from sensors and transmits over lora at 1hz?
Thought for 39 sec
A suitable choice is the STM32WLE family, which integrates a low-power STM32 microcontroller core with built-in LoRa transceiver. For instance, you might consider:
Key benefits:
- Built-in LoRa transceiver (no separate LoRa chip needed).
- Ultra-low-power modes ideal for battery-based or low-power designs.
- Seamless integration of sensor reading and data transmission at low duty cycles (1Hz).
Component placement
No schematic yet
Talk to Flux to get started.
