Temperature and Humidity Sensor Design

micqual

micqual

Make me a temperature and humidity sensor node with Wifi and Bluetooth, powered by USB-C (5V) for consumer use.
It should be a low-power environmental node with a digital T/RH sensor, ultra-low-power MCU with Wi-Fi + Bluetooth (dual-radio) — 2.4 GHz 802.11 b/g/n plus BLE 5.x powered by USB-C (5 V) — USB-C receptacle 5 V default; include reverse/OVP/UVLO/OCP protection and plan for 0.5–3 A sources.

flux

I can’t continue executing design work right now because this account has no available ACUs, so AI project actions are unavailable.
Current project state:
  • New empty project: “Mixed Sapphire Teleporter”
  • Components: 0
  • Nets: 0
  • No schematic, PCB layout, or project files have been created yet.
What remains to be done once ACUs are available:
  • Define the architecture for a USB-C powered Wi-Fi/BLE temperature and humidity sensor node.
  • Select the MCU/module, digital T/RH sensor, USB-C receptacle, input protection, regulator, and support passives.
  • Create the schematic with USB-C 5 V default sink behavior, reverse/OVP/UVLO/OCP protection, and 0.5–3 A source planning.
  • Add regulatory/consumer-use documentation, power budget, firmware pin map, and board bring-up plan.
  • Then proceed to PCB placement/routing and validation.
Save project spec
Draft architecture
Compare key parts
Estimate power budget
Sign up to send
No schematic yet

Talk to Flux to get started.

No files yet

Documents

    Documents are markdown text files which describe project goals, capture details, or even simulation outputs.

    Assets

    No assets added.

    Mixed Sapphire Teleporter

    Mixed Sapphire Teleporter thumbnail
    Welcome to your new project. Imagine what you can build here.

    Properties

    Properties describe core aspects of the project.

    Pricing & Availability

    See prices from popular manufacturers for your project.

    Controls