COM-HPC Carrier Layout
Thought for 15 sec
I’ll update Version 5.0 front-view visuals only so the Compute Module is drawn with correct 90 mm × 100 mm proportions and occupies the appropriate larger area. Version 4.0 stays locked.
Worked for 3 mins 46 sec
Thought for 26 sec
Created image.
You can move the component labels off to the side of the PCB
Worked for 4 mins 54 sec
Redone for Tiny Tim Version 5.0 front view.
Changes applied:
- Compute Module is shown much larger with intended 90 mm × 100 mm proportions.
- Carrier board remains 105 mm × 115 mm.
- Labels moved off the PCB as side callouts to reduce clutter.
- Version 4.0 remains locked and unchanged.
Updated file:
Updated Front View
Image
Redo rear and review
Lock Version 5.0
Compare front views
Check label accuracy
Improve compute module fit
Refine this doc
Ask about this doc
Tiny Tim Vertical Connectors v2.0
Source
This file supersedes the earlier Tiny Tim Vertical Connectors v0.5 component-table basis. The v2.0 PPTX is now the active connector/component source of truth for quantities and part numbers.
Source attachment:
Tiny Tim Redo with Vertical Connectors v2.0.pptxExtracted Connector Part List
Table
| Connector Type | Quantity | Pins | Description / Location | Recommended Board-Mount Part Number | Mating Housing / Cable Example | Notes |
|---|---|---|---|---|---|---|
| JST-GH | 3 | 4 | USB 2.0 Host (x2), CAN | BM04B-GHS-TBT (JST) | GHR-04V-S | 1.25 mm pitch, common in Pixhawk ecosystem |
| JST-GH | 3 | 6 | UART0/GPIO, UART1/GPIO, UART2/I2C0 | BM06B-GHS-TBT (JST) | GHR-06V-S | 1.25 mm pitch, top-entry SMT header |
| JST-GH | 2 | 7 | SPI/GPIO, I2S/GPIO | BM07B-GHS-TBT (JST) | GHR-07V-S | 1.25 mm pitch, top-entry SMT header |
| Molex CLIK-Mate | 1 | 6 | 5V IN / power input candidate | Molex 5031590600 | 5025780600 plug housing | Version 4.0 reasonable selection: 1.5 mm pitch 6-circuit vertical through-hole board receptacle; replaces cable-side 502578-0600/0601 as board-mount part. Note: final power policy may change this away from 5 V due to power budget. |
| PicoBlade | 1 | 4 | Fan | Molex 53047-0410 or equivalent | PicoBlade housing | 1.25 mm pitch |
| FFC | 3 | 22 | Dual MIPI CSI (CAM0/CAM1) | Molex 0525592253 / 52559-2253 | 22-pin 0.5 mm FFC cable | Version 4.0 reasonable selection: vertical 22-position 0.5 mm slider ZIF FFC/FPC connector, 3.90 mm height |
| FFC | 1 | 16 | PCIe, Raspberry Pi 5 compatible | Molex 505110-1692 | 16-pin 0.5 mm FFC | Version 4.0 reasonable quantity selection: 1x rear PCIe/USB FFC; right-angle bottom-contact, 1.90 mm height |
| XT60 | 1 | 2 | BAT IN | XT60PW-M30.G.Y.T / XT60PW-M30 | XT60 female plug | Version 4.0 reasonable selection: Amass PCB-mount male XT60, datasheet rating about 35 A / 80 VDC; exact footprint import/verification required |
| XT30 | 1 | 2 | BAT OUT | XT30PW-M30 (Amass, PCB mount) | XT30 female plug | Measured output |
| RJ45 | 2 | 8 | 10 GbE Ethernet | Bel / TRP G55-122N-155 | Ethernet cable | Version 4.0 selected replacement for incorrect 5555165-1 entry; vertical 1x1 10GBASE-T MagJack ICM with integrated magnetics, through-hole, LEDs, 60 W 4PPoE, -40°C to +85°C |
| USB-A | 3 | 9 | Dual USB 3.2/2.0 Host | TE Connectivity 2438987-1 | USB-A plugs | Version 4.0 reasonable selection: vertical USB Type-A USB 3.1/3.2 Gen 2 9-position through-hole receptacle |
| USB-C | 3 | 24 | USB-C OTG, dual mode | Adam Tech USB-C31-S-VT-CS4-BK-PP-T/R | USB-C cable | Version 4.0 reasonable selection from Flux library for vertical USB-C Gen2 OTG/data ports; partUid b3a7bff8-9e2a-4b80-b8cc-bc7709bf97ce |
| HDMI | 1 | 19 | Full-size HDMI | Molex 0476591100 / 47659-1100 | HDMI cable | Version 4.0 reasonable selection: vertical HDMI Type A receptacle, 19 circuits, 8.5 mm mounted height |
| M.2 | 1 | 67 | E/B-key wireless 2230 | TE Connectivity 2199230-4 | TBD | Version 4.0 approved replacement for original Molex 105450-0401 entry; rear flat-mounted 2230 module with standoff/mechanical retention |
| M.2 | 1 | 75 | M/B-key storage 2280 | Amphenol MDT420M01501 | TBD | Version 4.0 approved replacement for original Molex 105450-0101 entry; rear flat-mounted 2280 module with standoff/mechanical retention |
| M.2 Wireless SDR | 1 | 16 | x4 PCIe / USB | Molex 505110-1692 | TBD | Compact rear/back PCIe/USB interface candidate |
| JST-GH | 1 | 7 | Audio | BM07B-GHS-TBT (JST), top-entry / vertical SMT header | TBD | Audio auxiliary header |
| JST-GH | 2 | 4 | CAN / CAN-FD | BM04B-GHS-TBT (JST) | TBD | Additional CAN / CAN-FD headers |
| Fakra, Uni/Quad | 4 | 1 coax each | GMSL | TE Connectivity 7-2287906-0 | FAKRA coax cable | Version 4.0 reasonable selection: 50 Ω FAKRA Code Z/water-blue edge/right-angle PCB connector, 0-6 GHz, GMSL-compatible coax candidate; not top-entry, because no verified vertical FAKRA was found |
| Type-C | 1 | 24 | TBT / USB4 candidate | Molex 2047110001 | USB-C / TBT cable | Version 4.0 reasonable connector candidate: vertical USB Type-C USB4 40 Gbps 24-circuit receptacle. TBT still requires full USB4/TBT architecture, routing, retimers/controllers, and compliance definition |
Quantity Notes
- JST-GH total extracted count: 11 connectors across 4-pin, 6-pin, and 7-pin variants.
- CSI FFC count: 3x 22-pin connectors using Molex 0525592253 / 52559-2253 as the Version 4.0 reasonable selection.
- PCIe FFC count: 1x 16-pin Molex 505110-1692 selected for the rear PCIe/USB FFC path.
- Rear M.2: 1x E/B-key 2230 and 1x M/B-key 2280.
- Ethernet: 2x RJ45.
- USB: 3x USB-A and 3x USB-C, plus 1x Type-C TBT.
- Power/battery: 1x 5V IN, 1x BAT IN XT60, 1x BAT OUT XT30, 1x fan PicoBlade.
- GMSL: 4x Fakra.
Verification Notes Before Real Layout
- The JST-GH BM04B/BM06B/BM07B family and Molex 505110-1692 were found in the Flux library or public search results.
- Molex 502578-0600 appears publicly documented as a CLIK-Mate plug housing; the board-mount mate must be selected/verified before footprint placement.
- Version 4.0 approved M.2 replacements: TE Connectivity 2199230-4 for M.2 E/B-key 2230 and Amphenol MDT420M01501 for M.2 M/B-key 2280. Molex 105450-0401 / 105450-0101 should not be used for M.2 footprints.
- Version 4.0 approved 10GbE RJ45 replacement: Bel / TRP G55-122N-155. TE 5555165-1 should not be used for 10GbE because it is RJ25/6P6C Cat3, not RJ45 10GBASE-T.
- Molex 105450-0201 must still be verified before being used as a Type-C/TBT footprint. Public Molex results identify the 105450 series primarily as USB Type-C receptacles, and 105450-0201 was not verified in the public series chart.
- XT60PW-M30 and XT30PW-M30 should be verified against Amass datasheets/footprints before PCB placement.
- Version 4.0 reasonable selections added for remaining connectors: Molex 5031590600, Molex 0525592253, TE 2438987-1, Adam Tech USB-C31-S-VT-CS4-BK-PP-T/R, Molex 0476591100, Molex 2047110001, TE 7-2287906-0, and XT60PW-M30.G.Y.T.
Source
Extracted Connector Part List
Quantity Notes
Verification Notes Before Real Layout
