COM-HPC Carrier Layout
Thought for 15 sec
I’ll update Version 5.0 front-view visuals only so the Compute Module is drawn with correct 90 mm × 100 mm proportions and occupies the appropriate larger area. Version 4.0 stays locked.
Worked for 3 mins 46 sec
Thought for 26 sec
Created image.
You can move the component labels off to the side of the PCB
Worked for 4 mins 54 sec
Redone for Tiny Tim Version 5.0 front view.
Changes applied:
- Compute Module is shown much larger with intended 90 mm × 100 mm proportions.
- Carrier board remains 105 mm × 115 mm.
- Labels moved off the PCB as side callouts to reduce clutter.
- Version 4.0 remains locked and unchanged.
Updated file:
Updated Front View
Image
Redo rear and review
Lock Version 5.0
Compare front views
Check label accuracy
Improve compute module fit
Refine this doc
Ask about this doc
Tiny Tim Version 2.0
Version Label
Tiny Tim Version 2.0 is the active concept checkpoint and requirements baseline.
Source Basis
- Primary component-table source: Tiny Tim Redo with Vertical Connectors v2.0.pptx.
- The earlier Tiny Tim Vertical Connectors v0.5 source is retired and should not be used as the component-count or part-number basis.
- Quantities and part numbers from v2.0 are now the controlling planning data.
Lock State
Tiny Tim Version 2.0 is locked. Nothing is to be changed without the user's explicit request.
Locked items include connector counts, connector definitions, part-number references, placement intent, image geometry, labels, dimensions, front/rear visual references, and documentation wording. Future changes must be directly requested by the user and should be applied only to the specifically requested item(s).
Current Concept Visual References
The images below are the regenerated Tiny Tim Version 2.0 concept visual references using vertical receptacle / top-entry geometry from the v2.0 connector table. They are concept images, not CAD-accurate PCB renders.
Front View Reference
Image
Rear View Reference
Image
Important Limitation
This checkpoint preserves the concept and requirements state. It is not yet an external manufacturing package or CAD-accurate PCB design.
Version Label
Source Basis
Lock State
Current Concept Visual References
Front View Reference
Rear View Reference
Important Limitation
