COM-HPC Carrier Layout
Thought for 15 sec
I’ll update Version 5.0 front-view visuals only so the Compute Module is drawn with correct 90 mm × 100 mm proportions and occupies the appropriate larger area. Version 4.0 stays locked.
Worked for 3 mins 46 sec
Thought for 26 sec
Created image.
You can move the component labels off to the side of the PCB
Worked for 4 mins 54 sec
Redone for Tiny Tim Version 5.0 front view.
Changes applied:
- Compute Module is shown much larger with intended 90 mm × 100 mm proportions.
- Carrier board remains 105 mm × 115 mm.
- Labels moved off the PCB as side callouts to reduce clutter.
- Version 4.0 remains locked and unchanged.
Updated file:
Updated Front View
Image
Redo rear and review
Lock Version 5.0
Compare front views
Check label accuracy
Improve compute module fit
Refine this doc
Ask about this doc
Tiny Tim Version 4.0 Part Verification Results
Scope
This file records the first part-number and footprint verification pass for Tiny Tim Version 4.0. It uses Tiny Tim Vertical Connectors v2.0 as the input table and checks whether each candidate part number is usable for real schematic/PCB implementation.
No concept-image geometry, labels, connector placement, board dimensions, or locked visual state were changed during this verification pass.
Verification Summary
Table
| Group | v2.0 Candidate | Qty | Current Finding | Action |
|---|---|---|---|---|
| JST-GH 4-pin | JST BM04B-GHS-TBT | 3 + 2 CAN/CAN-FD = 5 total 4-pin JST-GH | Valid Flux library parts found; top-entry SMT GH-series header is appropriate. | Use BM04B-GHS-TBT(LF)(SN), verify final pin assignments later. |
| JST-GH 6-pin | JST BM06B-GHS-TBT | 3 | Valid Flux library parts found; top-entry SMT GH-series header is appropriate. | Use BM06B-GHS-TBT(LF)(SN), verify final pin assignments later. |
| JST-GH 7-pin | JST BM07B-GHS-TBT | 2 + 1 Audio = 3 total 7-pin JST-GH | Valid Flux library part found; top-entry SMT GH-series header is appropriate. | Use BM07B-GHS-TBT(LF)(SN), verify final pin assignments later. |
| Power input CLIK-Mate | Molex 502578-0600 / 502578-0601 | 1 | 502578-0600 is the cable-side plug housing, not the PCB board receptacle. Board-side part verified publicly. | Use Molex 5031590600, 6-circuit vertical through-hole CLIK-Mate PCB receptacle; mates with 5025780600 plug housing. Note final 12 V high-current power policy may require a different connector. |
| Fan PicoBlade | Molex 53047-0410 | 1 | Flux library part found; through-hole 4-pin PicoBlade board connector. | Usable pending mechanical orientation check. |
| CSI FFC | 22-pin 0.5 mm FFC | 3 | Vertical/top-entry candidate verified publicly. Flux library currently has a 22-pin right-angle fallback, not the selected vertical candidate. | Use Molex 0525592253 / 52559-2253, vertical 22-position 0.5 mm slider ZIF FFC/FPC connector. |
| PCIe / USB FFC | Molex 505110-1692 | 1 | Flux library part found and public Molex data confirms 16-position 0.5 mm right-angle bottom-contact FFC/FPC connector. | Use 1x Molex 505110-1692 for rear PCIe/USB FFC; Flux part 0ce204fd-1b64-4637-bcd2-a99f708b27f4. |
| BAT IN | XT60PW-M30 | 1 | Exact Flux library result not found, but public datasheet verifies XT60PW-M30.G.Y.T as PCB-mount male XT60, about 35 A / 80 VDC. | Use XT60PW-M30.G.Y.T / XT60PW-M30; missing-part request submitted. |
| BAT OUT | XT30PW-M30 | 1 | Flux library part found: AMASS XT30PW-M30.G.Y, 15 A, 500 V, through-hole PCB power connector. | Usable pending exact mechanical orientation check. |
| 10GbE RJ45 | Originally TE 5555165-1 or similar | 2 RJ45 | TE 5555165-1 is not 10GbE RJ45; it is RJ25/6P6C Cat3. Verified vertical 10G MagJack replacement selected. PoE design is stopped. | Use Bel / TRP G55-122N-155 for 2x data-only 10GbE RJ45 unless PoE is explicitly reopened. |
| USB-A | Standard vertical USB-A | 3 | Public TE data verifies a vertical USB 3.2 Gen 2 Type-A receptacle. Exact Flux library part not found. | Use TE Connectivity 2438987-1 for 3x vertical USB-A host connectors; missing-part request submitted. |
| USB-C OTG | Standard vertical USB-C | 3 | Flux library found a usable vertical USB-C Gen2 24-position receptacle with footprint. | Use Adam Tech USB-C31-S-VT-CS4-BK-PP-T/R, Flux part b3a7bff8-9e2a-4b80-b8cc-bc7709bf97ce, for 3x USB-C OTG/data connectors. |
| HDMI | Standard vertical HDMI Type A | 1 | Public Molex data verifies vertical HDMI Type A receptacle. Exact Flux library part not found. | Use Molex 0476591100 / 47659-1100; missing-part request submitted. |
| Rear M.2 E/B-key 2230 | Originally Molex 105450-0401 | 1 | Molex 105450 series is USB Type-C, not M.2. User approved replacement. | Use TE Connectivity 2199230-4; add 2230 standoff/mechanical retention. |
| Rear M.2 M/B-key 2280 | Originally Molex 105450-0101 | 1 | Molex 105450-0101 is confirmed USB Type-C, not M.2. User approved replacement. | Use Amphenol MDT420M01501; add 2280 standoff/mechanical retention. |
| Type-C TBT / USB4 | Originally Molex 105450-0201 | 1 | 105450-0201 remains unverified. Public Molex data verifies 2047110001 as vertical USB Type-C USB4 40 Gbps 24-circuit connector candidate. | Use Molex 2047110001 as connector candidate; missing-part request submitted. TBT architecture remains open beyond connector. |
| Fakra GMSL | TBD | 4 | No verified vertical FAKRA found. Flux library has verified TE 50 Ω FAKRA candidate suitable for GMSL coax but right-angle/edge-mount. | Use TE Connectivity 7-2287906-0, Flux part 59283499-dd1b-4f81-8a33-08268027fd51, as 4x GMSL FAKRA candidate; geometry caveat: not top-entry. |
| COM-HPC Mini type connector | Samtec ASP-230336-03 | 1 connector system | User selected Samtec ASP-230336-03: COM-HPC 400-position male carrier plug, 10 mm stack height, column termination, for more clearance and cooling. Exact Flux library part not found. | Missing-part request submitted; footprint import/create from Samtec manufacturer resources likely required before placement. |
Flux Library Parts Found
Table
| Function | Candidate Library Part | partUid | Notes |
|---|---|---|---|
| JST-GH 4-pin | BM04B-GHS-TBT(LF)(SN) | bf459cba-67ba-4bb7-b0bb-3a6f512744c7 | Exact 4-pin JST-GH top-entry SMT candidate. |
| JST-GH 6-pin | BM06B-GHS-TBT(LF)(SN) | 4d0ff384-7425-4ee8-8786-5dafb8888048 | Exact 6-pin JST-GH top-entry SMT candidate. |
| JST-GH 7-pin | BM07B-GHS-TBT(LF)(SN)(N) | c9192a01-1eb5-4afe-af39-3a12fb37cf9c | Exact 7-pin JST-GH top-entry SMT candidate. |
| PicoBlade fan | Molex 530470410 | 40a04ad5-2abb-475e-94c4-4f279f16f1ff | 4-pin through-hole board connector. |
| PCIe/USB FFC | Molex 5051101692 | 0ce204fd-1b64-4637-bcd2-a99f708b27f4 | 16-pin right-angle/bottom-contact FFC; geometry must be reviewed. |
| XT30 BAT OUT | XT30PW-M30.G.Y | d7014d62-22f9-4be9-9625-3dc4b41c4bdd | Flux result is XT30, 15 A, through-hole. |
| M.2 E-key | TE 2199230-4 | 757ea7be-ffcd-4c93-b746-0459da7c39c0 | Real M.2 E-key 67-position alternative. |
| M.2 E-key | Amphenol MDT420E03001 | 0e306603-5544-440b-baa6-11d5d18c6574 | Real M.2 E-key alternative. |
| M.2 M-key | Amphenol MDT420M01501 | 220aa0e1-7cd7-4889-a366-b5659a32717a | Real M.2 M-key 75-position alternative. |
| 10G RJ45 Flux-library fallback | Bel 2250629-1 | 54b8afe2-e61c-4b7a-b643-7a21dc137830 | 10GBASE-T MagJack with integrated magnetics in Flux library, but not the selected part because returned metadata did not confirm vertical mount. |
| Vertical RJ45 fallback | RJE741886110 | ed469aea-218f-43ca-9e3e-a671fb21e8fe | Vertical shielded RJ45, but explicit 10GBASE-T/magnetics capability must be verified. |
| 22-pin CSI right-angle fallback | Molex 0524352271 | 1d2e3056-dcdf-4130-aa5e-3eef717fc8bb | 22-pin 0.5 mm top-contact right-angle FFC; not the desired vertical geometry. |
| USB-C OTG selected | Adam Tech USB-C31-S-VT-CS4-BK-PP-T/R | b3a7bff8-9e2a-4b80-b8cc-bc7709bf97ce | Vertical USB-C Gen2 24-position receptacle selected for 3x USB-C OTG/data ports. |
| Fakra GMSL selected | TE Connectivity 7-2287906-0 | 59283499-dd1b-4f81-8a33-08268027fd51 | 50 Ω FAKRA Code Z/water-blue connector selected for 4x GMSL coax; right-angle/edge-mount geometry caveat. |
Public Datasheet Candidates Not Yet in Flux Library
Table
| Function | Candidate | Why it matters |
|---|---|---|
| CLIK-Mate 5V IN board receptacle | Molex 5031590600 | 6-circuit vertical through-hole board receptacle; correct mate for 5025780600 plug housing. |
| CSI FFC vertical | Molex 0525592253 / 52559-2253 | 22-position 0.5 mm vertical SMT slider ZIF FFC/FPC connector. |
| CSI FFC vertical | Hirose FH12-22S-0.5SVA(54) | 22-position 0.5 mm vertical FFC/FPC connector option. |
| 10G vertical RJ45 MagJack | Bel / TRP G55-122N-155 | Selected Version 4.0 replacement: 1x1 vertical 10GBASE-T MagJack with integrated magnetics, 60 W 4PPoE, LEDs, -40°C to +85°C. |
| 10G vertical RJ45 MagJack | Bel / TRP 2250414-1 | Vertical low-profile 10GBASE-T integrated magnetics option. |
| USB-A vertical USB 3.x | TE 2438987-1 or TE 2439034-3 | Vertical Type-A USB 3.1 Gen 2 receptacle candidates. |
| USB-C vertical | TE 2337857-1 | Vertical USB-C receptacle candidate, USB 3.1 Gen 1. |
| USB-C vertical | Molex 204711-series | Molex vertical USB-C series; likely better match than 105450 for Z-entry. |
| HDMI vertical | Molex 0476591100 / 0476591102 | Vertical HDMI Type A receptacle candidates. |
| HDMI vertical | Amphenol 10078837-001LF or G45 series | Vertical/upright HDMI Type A candidates. |
| USB4/TBT vertical Type-C | Molex 2047110001 | Selected connector candidate for Type-C TBT/USB4: vertical USB-C USB4 40 Gbps 24-circuit receptacle; architecture still requires controller/retimer and SI definition. |
Critical Blockers Before Real Layout
- COM-HPC Mini type connector and mechanical spec are not selected. This is the top blocker because the carrier connector datum drives pin mapping, keepouts, routing density, and module placement.
- M.2 candidate MPNs in v2.0 were incorrect and have approved replacements: use TE 2199230-4 for M.2 E/B-key 2230 and Amphenol MDT420M01501 for M.2 M/B-key 2280 before footprint placement.
- 10GbE RJ45 mismatch fixed: TE 5555165-1 is RJ25/Cat3, not RJ45 10GbE. Version 4.0 selected Bel / TRP G55-122N-155 as the verified vertical 10GBASE-T MagJack replacement.
- USB-C/TBT needs architecture definition: a connector alone does not implement Thunderbolt. Need to know whether the COM-HPC Mini type module exposes TBT/USB4 directly and what retimers/protection are required.
- Vertical/Z-entry requirement conflicts with some library candidates: several available library parts are right-angle/edge-entry despite being electrically correct.
- COM-HPC Mini connector footprint is likely a custom/import step: selected Samtec ASP-230336-03 was not found in Flux library during this pass.
- Power connector policy is still open: the CLIK-Mate row is verified mechanically as Molex 5031590600, but the Version 4.0 power budget indicates primary system power should likely be 12 V high-current, not small 5 V input.
Recommended Next Actions
- Import/create the selected COM-HPC Mini carrier connector footprint: Samtec ASP-230336-03, 10 mm stack height.
- Import/create the selected 10GbE RJ45 MagJack footprint for Bel / TRP G55-122N-155, since exact Flux library part was not found.
- Decide non-PoE primary power connector/current policy; Molex 5031590600 is verified as the board-side CLIK-Mate mate but may not be appropriate for full-power 12 V input.
- Import/create missing selected connector components and footprints.
- Define TBT/USB4 architecture beyond Molex 2047110001 connector choice.
- Once the connector list and power policy are approved, begin schematic capture with verified Flux library UIDs and imported missing connector components.
Scope
Verification Summary
Flux Library Parts Found
Public Datasheet Candidates Not Yet in Flux Library
Critical Blockers Before Real Layout
Recommended Next Actions
