Arduino Control Circuit Design
Thought for 45 sec
Below is a schematic wiring summary represented in a table. While I cannot generate a true circuit diagram image here, you can use this detailed wiring map as a guide when updating your schematic in Flux.
Table
| Component | Pin/Terminal | Connection |
|---|---|---|
| Arduino Uno | 5V | Connects to: DS18B20 VDD (via 4.7kΩ pull-up resistor), MPX5010DP VCC, Gravity Analog pH Sensor VCC, and Relay Module VCC |
| GND | Connects to: DS18B20 GND, MPX5010DP GND, Gravity Analog pH Sensor GND, Relay Module GND, and the common Ground component | |
| Digital Pin D2 | Connects to DS18B20 data pin (DQ) | |
| Analog Pin A0 | Connects to MPX5010DP analog output | |
| Analog Pin A1 | Connects to Gravity Analog pH Sensor analog output | |
| Digital Pin D8 | Connects to Relay Module control input | |
| DS18B20 (Temperature) | VDD | Connect to Arduino 5V (remember to add a 4.7kΩ pull-up resistor between data and 5V) |
| GND | Connect to Arduino GND | |
| DQ (Data) | Connect to Arduino Digital Pin D2 | |
| Pull-Up Resistor | Place a 4.7kΩ resistor between DS18B20 DQ and the Arduino 5V supply | |
| MPX5010DP (Pressure) | VCC | Connect to Arduino 5V |
| GND | Connect to Arduino GND | |
| Analog Output | Connect to Arduino Analog Pin A0 | |
| Gravity Analog pH Sensor | VCC | Connect to Arduino 5V |
| GND | Connect to Arduino GND | |
| Analog Output | Connect to Arduino Analog Pin A1 | |
| Relay Module (for Pump) | VCC | Connect to Arduino 5V (or as specified by the relay module documentation) |
| GND | Connect to Arduino GND | |
| Control Input | Connect to Arduino Digital Pin D8 | |
| Relay Contacts | Interface the pump’s power supply with these contacts (ensure the pump’s voltage/current ratings match the relay ratings) |
Use this table as a reference to update your schematic within Flux. You can place and connect the components accordingly on your project canvas. If you need further clarifications or adjustments, let me know!
Update schematic connection
Need circuit diagram
Clarify wiring instructions
