Desk Screen Design

Worked for 4 mins 9 sec
Thought for 9 sec — Considering project design
Created 4 tasks.
1/4 Define the schematic architecture and power budget from the write-up

Define the schematic architecture and power budget from the write-up

Build the USB-C input, 3.3 V buck, 8 V boost, P8 divider, and tap detector

Verify connectivity, component values, and ERC findings

Name and document the project

Accessed knowledge for the next task.
Thought for 5 sec
Referenced guidance.
Thought for 30 sec — Planning project architecture
Thought for 4 sec — Fetching project assets
Referenced guidance.
Getting project info.
Reading project assets.
Getting a schematic overview.
Reading project docs.
Thought for 37 sec — Creating documentation and calculations
Renamed Desk Screen Power & Tap Controller.
Updated project description.
Updating 3 project docs.
Thought for 4 sec — Looking into USB-C projects
Searching flux-reference-design account for "USB-C".
Searching flux-reference-design account for "buck converter".
Searching flux-reference-design account for "boost converter".
Searching flux-reference-design account for "piezo".
Thought for 16 sec
Found 2 results for TPS628302ADRLR exact Texas Instruments 2 A adjustable buck converter VSON-HR package for 5 V to 3.3 V rail, active lifecycle and datasheet attached.
Found 3 results for LT1935ES5 exact Analog Devices Linear Technology boost converter SOT-23-5 for 5 V input to 8 V output, active lifecycle and datasheet attached.
Found 3 results for USB Type-C receptacle power-only USB 2.0 connector with through-hole shield tabs and hand-solderable SMD signal pins, all VBUS CC1 CC2 and GND pins exposed, rated 3 A.
Found 3 results for resettable fuse or low resistance current protection for 5 V USB-C input approximately 3 A operating current in hand-solderable SMD package, active part.
Found 3 results for unidirectional 5 V TVS diode for USB VBUS input protection, low clamping voltage, at least 3 A power path shunt protection, SMA or SMB hand-solderable SMD.
Found 10 results for 1N4148.
Found 3 results for low leakage dual Schottky diode rail clamp topology for protecting ESP32 3.3 V ADC input to 3V3 and GND, low capacitance, SOT-23, active component.
Found 3 results for Schottky rectifier for LT1935 boost converter 5 V to 8 V output, at least 20 V reverse rating and 1 A average current, low forward drop, SMA hand-solderable SMD.
Found 3 results for 2 pin and multi-pin 2.54 mm through-hole headers for power outputs and external ESP32 interface, hand solderable, active lifecycle.
Found 3 results for PCB test point loop or compact SMD test point suitable for probing 3 A low voltage rails during bring-up.
Thought for 16 sec
Thought for 8 sec — Searching for components
Read LT1935ES5#PBF, PRTR5V0U2X datasheets.
Found 2 results for TPS628302.
Found 2 results for TPS628302ADRLR.
Found 9 results for BAS70-04.
Found 2 results for Conn_01x02.
Found 2 results for Conn_01x03.
Found 2 results for Conn_02x04.
Thought for 30 sec
Thought for 3 sec — Considering TPS Creation
Found 10 results for site:ti.com/lit/ds TPS628302 datasheet PDF TPS628302A DRL.
Found 10 results for TPS628302ADRLR datasheet pinout typical application 3.3V 2A.
Thought for 3 sec
Read self tps628303.pdf.
  • self: SOT583 DRL pin configuration and pin functions TPS628302A
  • self: typical application circuit adjustable output component valu...
  • self: feedback reference voltage equation resistor divider 1.12 MO...
  • self: recommended input capacitance output effective capacitance a...
  • self: MODE pin low behavior PG open drain pullup and EN connection- self: SOT583 DRL pin configuration and pin functions TPS628302A
  • self: typical application circuit adjustable output component valu...
  • self: feedback reference voltage equation resistor divider 1.12 MO...
  • self: recommended input capacitance output effective capacitance a...
  • self: MODE pin low behavior PG open drain pullup and EN connection- self: SOT583 DRL pin configuration and pin functions TPS628302A
  • self: typical application circuit adjustable output component valu...
  • self: feedback reference voltage equation resistor divider 1.12 MO...
  • self: recommended input capacitance output effective capacitance a...
  • self: MODE pin low behavior PG open drain pullup and EN connection
Created 3 project docs

Block Diagram

View Document
Block Diagram Scope Exclusions
No mains PSU, CCFL inverter, 13 V audio rail, or PROTECT3 bypass is included.
Block Sourcing Plan
  • USB-C input/protection: reference search required; otherwise datasheet-backed parts from scratch.
  • 3.3 V buck: exact TPS628302ADRLR datasheet application circuit.
  • 8 V boost: LT1935ES5 datasheet topology adapted from its 5 V input reference.
  • P8 divider: from scratch using 1% generic passives; function remains provisional.
  • Tap detector: from scratch with a datasheet-supported low-leakage ADC clamp.

Project Specification

View Document
Project Specification Project Overview
First-pass professional SMD schematic for rebuilding only the low-voltage television power and tap-control functions. Status: Draft / schematic checkpoint.
Intended Use
Prototype/validation board powered by a dedicated USB-C 5 V supply. It replaces selected low-voltage rails and exposes a piezo tap signal to an externally plugged ESP32-C3 Supermini.
What the Device Should Do
  • Accept 5 V through a power-only USB-C sink receptacle.
  • Protect and filter the input, then generate 3.3 V and 8 V television rails.
  • Generate provisional P8_REF near 1.038 V from 8 V.
  • Condition a piezo pulse into an ADC-safe TAP_ADC signal.
Main Features
  • Independent 5.1 kΩ Rd on CC1 and CC2; no USB data or PD negotiation.

Power Budget

View Document
Power Budget Assumptions
  • Minimum converter input for budgeting: 4.5 V.
  • Conservative buck efficiency: 85%.
  • Conservative boost efficiency: 85%.
  • ESP32-C3 Supermini is separately USB-powered and excluded.
Peak Loads Reflected to 5 V Input
At nominal 5.0 V and 85% efficiency, the two principal loads require approximately 2.49 A plus quiescent/control current.
Source and Protection Requirement
Use a dedicated regulated 5 V/3 A USB-C supply and a low-resistance cable. The board uses fixed Rd sink resistors but does not measure CC voltage and therefore does not detect whether the source advertises default, 1.5 A, or 3 A current. It must not be connected to an ordinary default-current USB port while full loads are enabled.
limepyro

limepyro

skip the peisco

flux

Got it—piezo/tap detection is removed from scope. The project is renamed Desk Screen Power & Tap Controller, but no schematic components were added because ACUs ran out; remaining work is the USB-C input, protected 3.3 V and 8 V rails, P8 reference, connectors, and ERC verification.
Correct project title
Clean up revised scope
Remove stale tap references
Select power components
Document power requirements
No schematic yet

Talk to Flux to get started.

  • Generic Inductor
    Generic Inductor
    A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
    jharwinbarrozo
    16.6k
  • Generic Capacitor
    Generic Capacitor
    A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Resistor
    Generic Resistor
    A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
    natarius
  • RMCF0805JT47K0
    RMCF0805JT47K0
    General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
    jharwinbarrozo
    1.2M
  • 875105359001
    875105359001
    10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
    jharwinbarrozo
    1.2M
  • CTL1206FYW1T
    CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
    jharwinbarrozo
    1.1M
  • 1070TR
    1070TR
    Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
    jharwinbarrozo
    700.5k
  • Push Button
    Push Button
    A momentary or non-latching switch which causes a temporary change in the state of an electrical circuit only while the switch is physically actuated. SWITCH TACTILE SPST-NO 0.05A 24V
    jharwinbarrozo
    490.7k
  • XY301V-A-5.0-3P
    XY301V-A-5.0-3P
    Straight 3 pin 5mm 3-pin Pitch 5mm 15A 1.5 300V Screw terminal block 01x03 #screwblock #connector #commonPartsLibrary
    jharwinbarrozo
    537.9k

Desk Screen Power & Tap Controller 7820

Desk Screen Power & Tap Controller 7820 thumbnail
USB-C 5 V powered controller generating protected 3.3 V and 8 V television rails plus a piezo tap-detector interface for an external ESP32-C3 module.

Properties

Properties describe core aspects of the project.

Pricing & Availability

See prices from popular manufacturers for your project.

Controls