RC01756 Connector 3D Model
Thought for 6 mins 8 sec
Thought for 5 sec
Referenced guidance.
Thought for 8 sec
1/2 Create and attach the approved simplified RC01756 model.
Create and attach the approved simplified RC01756 model.
Verify model dimensions, recessed seating and eight-pin alignment; confirm drills remain unchanged.
Thought for 9 sec
Thought for 6 sec
Awaiting 1 task
"RC01756 3D Model Research" completed.
Thought for 5 sec
Created and attached the simplified RC01756 3D model to the connector footprint.
- Checked all eight terminal centres against their pads.
- Confirmed the housing extends 2.8 mm below the PCB seating plane.
- Left the pads, 0.60 mm drills, symbol and connectivity unchanged.
3D Model
The socket, latch and mounting details are visual approximations, not precise mating geometry. A PCB using this recessed connector will need an appropriate opening; none was added here. Geometry and 3D readback checks completed, but an independent review remains undone.
Execution stopped because your ACUs ran out.
Waiting for input
