USB Model Alignment


This component already has a 3D model object named 'Model'. Check the 3D model against the footprint (pads, mounting holes, outline) and align it so it is correctly positioned, rotated and seated on the board (Z). Do not change the footprint, pads, symbol, pins or properties. Report what you changed.
I’ll check the existing Model against the pads, mounting holes and outline, then adjust only its position and rotation, including its Z seating. I’ll leave the footprint, symbol, pins and component properties unchanged.
Finished execution
"Aligning USB Connector 3D Model" completed.
Finished execution
Moved Model from (0, 0, 0) to (0, −1.560, +1.225) mm; rotation remains (0°, 0°, 0°) and scale is unchanged. Contacts and mounting features align numerically, with the model’s seating plane at board Z=0, though a 3D-preview discrepancy prevents definitive visual confirmation of seating. Only Model’s position changed—footprint, pads, holes, outline, symbol, pins and component properties remain untouched.
"Micro USB Model Alignment Verification" completed.
Verification is complete: only Model’s position changed, and its orientation and contact alignment are consistent with the footprint. Exact Z seating remains numerically established but not definitively confirmed in the 3D preview.

Pin #
Name
Type
Section
Pin Group
Orientation
Order
Sub-symbol
Terminal Type
1
VBUS
Unspecified
Top
unspecified
2
D-
Unspecified
Right
unspecified
3
D+
Unspecified
Right
unspecified
4
ID
Unspecified
Left
unspecified
5
GND
Unspecified
Bottom
unspecified
6
EH
Unspecified
Bottom
unspecified
7
EH
Unspecified
Bottom
unspecified
8
EH
Unspecified
Bottom
unspecified
9
EH
Unspecified
Bottom
unspecified

MICRO 5.9ZB5.7(040)