PCB Net Class Configuration
creating Power_5V net class with 40 mil width...
0:07
Started: Create a net class named Power_5V with track width 40 mil and clearance 10 mil.
Creating Signals net class...
0:06
Started: Create a net class named Signals with track width 8 mil and clearance 6 mil.
Assigning Signals as default class...
0:09
Started: Assign Signals as the default class for all unassigned nets.
Thought
Work done
- None of the net classes were created, and the default class remains unset.
Couldn’t do
- Creation of Power_24V net class (80 mil width, 16 mil clearance)
- Creation of Power_5V net class (40 mil width, 10 mil clearance)
- Creation of Signals net class (8 mil width, 6 mil clearance)
- Assigning Signals as the default class for unassigned nets
Success criteria review
- Power_24V net class present: ❌
- Power_5V net class present: ❌
- Signals net class present: ❌
- Default class set to Signals: ❌
Next step
Open the PCB Layout Rules in Flux, manually define the three net classes with their specified track widths and clearances, and then set Signals as the default net class for all unassigned nets. After updating, verify the rules list to confirm each class’s parameters and the default setting.
No schematic yet
Talk to Flux to get started.
