Pico Cartridge Controller
a game controller with a raspberrry pi pico chip. 6 buttons, and a slot that reads cartridges. Cartridges are just USB storage sticks in a square shape.
Thought for 7 sec
No design changes were made; the project is still empty because no ACUs are currently available for AI execution.
Remaining work:
- Define the Raspberry Pi Pico/Pico W choice and USB-host support for reading cartridge storage.
- Specify the cartridge’s USB connector, square mechanical format, insertion alignment, and retention.
- Add six buttons, power circuitry, USB protection, and programming/debug access.
- Capture and verify the schematic, then design the PCB outline and cartridge slot.
Once ACUs are available, I can build this from the schematic through PCB layout.
Use Pico USB host
Choose cartridge connector
Add button inputs
List schematic blocks
No schematic yet
Talk to Flux to get started.
