BME280 vs AHT20 Comparison


I’ll read the attached text to see what you’d like me to do.
I’ll create only the new comparison guide and leave all existing files unchanged. The brief’s “Related in Flux” URLs point to unrelated LED parts, so I’ll use the BME280 guide and AHT20 links supplied earlier in the brief instead.
Created a project doc

BME280 vs AHT20: Differences and Which to Use

View Document

BME280 vs AHT20: Differences and Which to Use
For aht20 vs bme280, the main difference is pressure sensing: BME280 measures pressure, humidity, and temperature; AHT20 measures humidity and temperature. Pick BME280 when pressure or SPI is required, and AHT20 for a humidity-and-temperature-only I²C design.
Scope: exact bare Bosch BME280 and bare Aosong/ASAIR AHT20, not breakout modules, AHT10, AHT21, or other sensor variants. Electrical operating limits are not absolute-maximum stress ratings. Implementation choices below are labeled as engineering guidance.
Quick answer
Created BME280 vs AHT20: Differences and Which to Use in project files. All existing files remain unchanged.
Checked the saved guide’s structure, citations, and both datasheet pinouts.
Values left out: matched-condition current/power comparisons, conversion-speed rankings, and full-range maximum accuracy limits. I did not establish sufficiently verified, comparable values for those claims. Prices and stock were excluded as requested.
Pinout risk: the parts are not pin- or footprint-compatible. Replacement requires PCB remapping and new firmware, and AHT20 does not retain pressure sensing. No hardware testing was performed.

SDI
SDO
SCK
CSB
Pin #
Name
Type
Section
Pin Group
Orientation
Order
Sub-symbol
Terminal Type
1
GND
Unspecified
powerIn
2
CSB
Unspecified
INPUT
3
SDI
Unspecified
bidi
4
SCK
Unspecified
INPUT
5
SDO
Unspecified
bidi
6
VDDIO
Unspecified
powerIn
7
GND
Unspecified
powerIn
8
VDD
Unspecified
powerIn

BME280