Chat

Welcome to Flux

Treat Flux like your intern. Tell it what you'd like to build and it'll get to work. You can also ask it questions, brainstorm ideas, and teach it your preferences. Learn More

Explain this part
Write a part description
Describe each pin
Operating conditions
Electrical max ratings
Part Specifications
Application circuits
Verify Part Details
Recommend similar parts
Check availability & lifecycle
Check that all reset/enable have an external pull-up or pull-down resistors. Rep...
khoinvn

khoinvn

@copilot Check that all reset/enable have an external pull-up or pull-down resistors. Report action items in an ordered list.
1y

copilot

To check if all reset/enable pins have external pull-up or pull-down resistors, let's first identify the relevant pins on the LT3473EDD#PBF.
For the LT3473EDD#PBF:
  • Reset/Enable Pins:
    • SHDN (Pin 6): This is the shutdown pin that enables the device when connected to 1.4V or higher and disables it when connected to 0.2V or less. It can also be used for soft-start with an RC filter.
Action Items:
  1. Add RC Filter to SHDN Pin (U1:6):
    • Components Needed:
      • Resistor (20kΩ): Connect between 3V supply and U1:6.
      • Capacitor (100nF): Connect between U1:6 and GND.
    • Connections:
      • Connect the resistor's first pin to the 3V supply.
      • Connect the resistor's second pin to U1:6.
      • Connect the capacitor's first pin to U1:6.
      • Connect the capacitor's second pin to GND.
Connect the components and pins as follows:
  • Connect 20kΩ resistor:1 to 3V supply.
  • Connect 20kΩ resistor:2 to $U1:6$.
  • Connect 100nF capacitor:1 to $U1:6$.
  • Connect 100nF capacitor:2 to GND.
Verify if there are any additional reset or enable pins in other components you plan to include in your project. If more components are present, please list them so I can provide specific instructions.
Is there anything specific you would like to ask or clarify about these steps?
1y
1
U2
U1

No files yet

Documents

    Documents are markdown text files which describe project goals, capture details, or even simulation outputs.

    Assets

    svg

    led-on.svg

    led-on
    kicad_mod

    LED_1206_3216Metric.kicad_mod

    LED_1206_3216MetricFootprint
    LED_1206_3216Metric.step

    LED_1206_3216Metric.step

    3D_LED_1206_3216Metric3D Model
    svg

    led-off.svg

    led-offDefault

    [Example] LED Simulator Template fb8b

    [Example] LED Simulator Template fb8b thumbnail
    Simulator template for an LED part. Check out the Code editor for instructions!

    Properties

    1.70

    V

    LED

    CTL1206FYW1T

    page.venkel.com/hubfs/Resources/Datasheets/LEDs/CTL1206FYW1T.pdf

    LED

    Pricing & Availability

    DPN

    Stock

    Qty 1

    1

    21K

    $0.03655

    1

    0

    $0.113

    Controls