kenimost / Worried Blush Memory Implanter

Loaded

0

0

Files

Schematic

PCB

Log InSign Up

Temperature and Humidity Sensor Design

kenimost

kenimost

Make me a temperature and humidity sensor node with Wifi and Bluetooth, powered by USB-C (5V) for consumer use.
It should be a low-power environmental node with a digital T/RH sensor, ultra-low-power MCU with Wi-Fi + Bluetooth (dual-radio) — 2.4 GHz 802.11 b/g/n plus BLE 5.x powered by USB-C (5 V) — USB-C receptacle 5 V default; include reverse/OVP/UVLO/OCP protection and plan for 0.5–3 A sources.
172 days

flux

0:38

I’ll create your low-power Wi‑Fi/BLE temperature & humidity node with USB‑C 5 V input and full protection. Here’s the plan:
  1. Add key ICs: dual‑radio MCU (Wi‑Fi 2.4 GHz 802.11 b/g/n + BLE 5.x), digital T/RH sensor, USB‑C receptacle + CC resistors.
  2. Power path: reverse/OVP/UVLO/OCP at USB‑C input; 5 V → 3.3 V regulator; decoupling.
  3. Supporting: antenna/matching, programming header, status LED, pull‑ups, test points.
  4. Net connections across subsystems; prep footprints; run ERC/DRC.
Click Start on the plan bar to proceed, or tell me part preferences (e.g., ESP32‑C3/C6/S3 variant, sensor model, buck vs LDO) and I’ll update before running.
Plan
#Goal
  • Design a low-power environmental sensor node that measures temperature and humidity, incorporating a dual-radio Wi‑Fi (802.11 b/g/n 2.4 GHz) and BLE 5.x MCU. The node will be powered from a USB‑C 5 V input with robust protection (reverse polarity, OVP, UVLO, and OCP) and support USB‑C sources ranging from 0.5 to 3 A. The design uses commonly available parts from the Flux library and includes a dedicated 3.3 V rail for the MCU and sensor.
#Implementation plan
  1. Add Key Components
    1. Select and add an ultra‑low‑power MCU with integrated dual‑radio Wi‑Fi/BLE (e.g., an ESP32 variant from the Flux library).
    2. Select and add a digital temperature/humidity sensor (e.g., Si7021 or a similar sensor available from the Flux library).
    3. Select and add a USB‑C receptacle along with required USB‑C CC resistors.
  2. Design the Power Path and Protection Subsystem
    1. Implement USB‑C input circuitry with CC resistors to adhere to default 5 V protocol.
    2. Add protection circuitry including reverse polarity protection, overvoltage (OVP), undervoltage lockout (UVLO), and overcurrent protection (OCP) capable of handling 0.5–3 A.
    3. Add a buck converter or LDO regulator to convert 5 V to a stable 3.3 V rail for the MCU and sensor, ensuring low-power operation and robust decoupling.
  3. Add Supporting Circuitry
    1. Incorporate decoupling capacitors near power pins and other supporting passive components.
    2. Design RF matching networks for the Wi‑Fi/BLE antenna, including proper grounding and filtering.
    3. Add a programming/debug connector and a status LED for board diagnostics.
    4. Include necessary pull-up resistors and test points to facilitate system debugging and validation.
  4. Connectivity and Interconnections
    1. Connect the USB‑C power input to the protection circuitry and voltage regulator.
    2. Ensure that the regulated 3.3 V rail supplies the MCU and sensor properly.
    3. Connect the MCU’s I/O pins to the digital sensor and interconnect the RF components with proper impedance matching and filtering.
  5. Review and Validate Design
    1. Run ERC/DRC checks to validate schematic completeness and component footprints.
    2. Adjust footprints and prepare the schematic layout for PCB placement.
#Success criteria
  • The schematic includes a dual‑radio MCU, digital temperature/humidity sensor, and a robust USB‑C power subsystem with all required protections.
  • The power path from USB‑C to the 3.3 V rail is correctly implemented to handle a range of 0.5–3 A.
  • All supporting circuits for RF, programming, and diagnostics are properly integrated and validated via ERC/DRC checks.
Pick MCU family
Choose sensor part
Regulator choice
Protection details
Enclosure and antenna
172 days
​
Sign up to send

To get started, talk to Flux or create a New Document.

Reviews

Documents

    Documents are markdown text files which describe project goals, capture details, or even simulation outputs.

    Assets

    No assets added.

    Worried Blush Memory Implanter

    Worried Blush Memory Implanter thumbnail
    Welcome to your new project. Imagine what you can build here.

    Properties

    Properties describe core aspects of the project.

    Pricing & Availability

    See prices from popular manufacturers for your project.

    Controls

    Welcome 👋

    Flux helps you build PCBs faster with an AI teammate!

    Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.

        Introducing AI Placement!
        AI Placement Demo

        AI-Powered Component Placement

        Let AI place your components intelligently. AI Placement analyzes your schematic and positions components for optimal routing, signal integrity, and board density.

        From Schematic to Layout in Seconds

        Skip the tedious manual placement. AI Placement generates a starting layout you can refine, saving hours of repetitive work on every new design.

        Works With Auto-Layout

        Pair AI Placement with Auto-Layout for a complete AI-driven PCB design flow — from component placement through trace routing, all with one click.

        Try it